Wi-Ex zBoost YX 050-PCS/CEL
Dual-band indoor antenna for YX510 system
This item is no longer available to purchase.
Contact us for other options
Share this product:
Our take on the Wi-Ex zBoost YX 050-PCS/CEL
This indoor omni-directional antenna from Wi-Ex lets you upgrade the signal strength of your YX510 cellular phone signal booster system. The YX050 improves reception of 800MHz and 1900MHz signals. You can mount it on either a wall or the ceiling, wherever reception is best. Includes an attached nine-inch coaxial cable.
- for use with Wi-Ex zBoost YX510 cell phone signal booster system only
- dual-band 800MHz and 1900MHz indoor antenna
- includes attached 9" coaxial cable
- optional extension cable available through Wi-Ex
- warranty: 1 year
- Our 60-day money-back guarantee
What's in the box?
Download owner's manual
- Ceiling mount omni-directional indoor antenna with attached 9" RG-8x coax cable
- Attached plastic nut
- Yellow plastic cap
- Installation Instruction sheet
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Overview: The Wi-Ex YX-050-PCS-CEL ceiling mount indoor,
omni-directional antenna provides enhanced performance for the Wi-EX zBoost cell
phone-PCS signal boosters and is compatible with YX500series and YX600 ProPack
Compatibility: The antenna will work with the following zBoost PCS-CEL-Dual Band signal boosters (673YX510 or 673YX545).
The YX050-PCS-CEL antenna provides enhanced signal strength in all
directions (omi-directional) from the antenna. The antenna should be located
near the center of the area where improved signal strength is desired.
Mounting: The antenna is mounted to a ceiling by drilling
out a 3/4" diameter hole in the ceiling where the antenna is to be mounted. The
antenna is then placed flush against the ceiling and the attached cable and
threaded mount routed through the hole. The installed plastic nut must be
removed first before routing the threaded mount through the hole. Once the cable
and threaded mount are through the hole the plastic nut is screwed back on to
tighten and secure the antenna into place.
Connection: The antenna may be connected directly to the
Base Unit using the attached 9'' RG-8x coax cable or located near the Base unit using
an optional RG-8x coax extension cable.
Review this product:
Thanks for taking the time to share your experiences about this product. Please
be sure to focus your comments on the product itself. Read our
Review Guidelines for more information.
For a more in-depth review and enhanced detailed information on the
Wi-Ex zBoost YX 050-PCS/CEL, please visit the Crutchfield website product
Get live, personalized service from an expert
Crutchfield Advisor: Hi there.
We're happy to answer questions or provide additional info about this item.
Advisors also available at 1-888-600-3963