Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Engine Noise: Noise, caused by the vehicle's engine, can
enter your stereo system in one of two ways: through the power source and
through the antenna. This noise increases and decreases with speed. This filter
eliminates engine noise coming through the power source.
Note: For noise entering through the antenna, you should
install an Antenna Noise Filter (see item # 003AS100).
Multiple Applications: This noise filter (S-10-A) can be
used for all audio components in your vehicle, including receivers, equalizers,
tape players, CD players, CD changers, or small amplifiers.
Capacity: The S-10A noise filter is recommended for audio
components rated up to 10 Amps and 150 watts.
Easy Installation: The filter can be mounted to a flat
surface using the supplied mounting screws and mounting plate. You can also
mount the filter using the supplied 10" wire tie. The filter features three
wires that need to be spliced into the power and ground wires leading to the
component. The red wire connects to the fused power wire leading to the radio.
The blue wire connects to the power lead of the receiver (or component), and the
black wire is connected to ground. The filter is most effective when mounted
close to the radio.