Bose® WB-3 brackets
Wall brackets for Bose 201® and 301® bookshelf speakers
Share this product:
Our take on the Bose® WB-3 brackets
Bose® designed these wall-mounted brackets specifically for use with 201® and 301® Series IV and V Direct/Reflecting® speakers. Included are directions for mounting, as well as the necessary hardware to attach these brackets to either drywall, masonry, or wooden walls.
Note: WB-3 wall brackets are not compatible with Bose 201® and 301® Series I, II or III speakers.
- mounting hardware included
- 5-1/16"W x 1-5/8"H x 1/2"D
- warranty: 30 days
Priced per pair
What's in the box?
Download owner's manual
- 4 Black interlocking metal wall brackets (2 used for each speaker)
- 4 Toggle bolt assemblies (each with a 3/16" x 2-1/2" bolt and a 3/16" toggle)
- 4 Silver Phillips-head wood screws (1-1/2" length)
- 4 Plastic expansion wall anchors
- 4 Black Phillips-head screws for speakers (3/4" length)
- One 1/16" drill bit
- 2 Rubber bumpers
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Application: The Bose WB-3 wall
brackets are custom-designed for Bose 201 and 301 Series IV and V speakers only.
Four interlocking metal brackets are provided--two for each speaker. Mounting
hardware is supplied. The speakers can be mounted to wood studs, wooden or
masonry walls, or drywall. The speakers hang approximately 1/2" from wall
- Speakers: Before the
speakers can be mounted, a bracket must first be fastened to each speaker.
This requires drilling two pilot holes into the back of the speaker cabinet
using the supplied 1/16" drill bit. One of the self-adhesive rubber
bumpers must also be attached to each speaker.
- Wall: Once the speaker
mounting locations have been selected, you must fasten one bracket per
speaker to the wall using either the supplied wood screws or toggle bolts.
Two pilot holes should be drilled for each speaker bracket. If you are using
the wood screws, a 1/4" drill bit should be used in order to insert the
supplied plastic expansion wall anchors. If you are using the toggle bolts,
a 1/2" drill bit should be used to allow the toggle to be inserted
completely through the drywall.
- Mounting Bracket:
Width=5.009", Height=1.606", Depth=0.468"
- Screw Pattern:
- Width: 4" using
outer screw holes
- Height: 0.5" using
center screws (only when mounting to vertical wall stud)
Reviews for the
Bose® WB-3 brackets
Average Customer Review:
Review this product:
Thanks for taking the time to share your experiences about this product. Please
be sure to focus your comments on the product itself. Read our
Review Guidelines for more information.
For a more in-depth review and enhanced detailed information on the
Bose® WB-3 brackets, please visit the Crutchfield website product
Get live, personalized service from an expert
Crutchfield Advisor: Hi there.
We're happy to answer questions or provide additional info about this item.
Advisors also available at 1-888-600-3963