Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Built-In FM Modulator:
For increased installation flexibility, the compact changer has the FM modulator
Frequencies: The modulator has 12
FM modulation frequencies. You can select the following
modulation frequencies from the wired remote/display unit: 87.9, 88.1, 88.3, 88.5,
88.7, 88.9, 89.1, 89.3, 89.5, 89.7, 89.9 or 90.1MHz.
System: This changer has a double-floating anti-vibration system for
Repeat Play: The changer can
repeat the current track or the current disc.
Random Play: The
changer can play all tracks on the current disc in random order or all tracks on
all discs in random order.
Mounting Angles: You
can install this changer at any angle from 0 to 90 degrees. There are angle
switching dials on both sides of the unit that must be set to agree with the
mounting angle of the unit.
Source Level Adjustment: A
source level adjuster allows you to match the CD output level with the FM level.
You can select one of seven different levels. The adjustment must be made from
the wired remote/display unit.
This unit will play prerecorded audio CDs, finalized CD-R discs and finalized
Controls On CXB6803
Wired Remote/Display Unit:
- Power/Adjust: Turns power
on/off and accesses settings mode
- P.Mode: Selects repeat and
- Pause: Pauses playback
- DISC Up/Down: Selects
discs and modulation frequency
- TRACK/FF&REV: Selects
tracks and source output level
display shows disc number, track number, elapsed track playing time, repeat play
mode, random play mode and play indicator (spinning CD icon).
Connections On Back Panel Of Changer:
- Power: 3-pin
male input for supplied power wiring harness
- Output: Female mini-jack
output which accepts the connector on the RF output cable. The RF output
cable then attaches to the antenna switching unit.
- Display: 5-pin male input for
wired remote/display unit
Remote/Display Unit: W=3.933",
Display Mounting Bracket: If you wish to
dash mount the wired remote/display unit using
the supplied bracket, you will need a 4.178"W x 1.661"H cutout with a
depth of 0.587".