Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Mounting Location: This
enclosure mounts behind rear panel on passenger's side and replaces the factory cargo net
in 1997-2000 Ford Expedition/Lincoln Navigators.
Contains a 20 ft. power wire, a 3 ft. ground wire and a 3 ft. remote turn-on wire.
- Phillips head screwdriver
- 15mm wrench
- 1/4" socket
- 6" ratchet extension
- Wire crimper
- T50 torx,
- 10mm socket
- 11/32" socket
- Wire cutters
This system is made specifically for the 1997-1999 Ford Expedition/Lincoln Navigator.
Built-in 100 watts RMS
Class D Amplifier: The amplifier is highly efficient and designed specifically
for use with the subwoofer in the enclosure.
- Design: The woofer
was custom-designed to compliment the efficiency of the Class D amplifier to deliver deep,
- Materials: Laminated paper
- Dust Cap: Poly material embossed a
"MTX Thunderform Amplified Subwoofer" logo.
- Surround: Foam
The crossover frequency can be varied from 50Hz to 150Hz for a seamless transition between
the output of this system and that of the other speakers in the vehicle.
Auto Turn-On Feature:
When the speaker level inputs are used, the system will automatically turn on and off with
Note: The Auto
Turn-on feature does not operate when the preamplifier level inputs are used unless the
remote turn-on lead is connected.
Enclosure Type and
Materials: The acoustic suspension enclosure is made of high density
polyethylene resin which is rigid enough to resist flexing and dampens any resonance.
Note: Dimensions are taken at the
widest points of the enclosure. Keep in mind that these enclosures are custom made to fit
in a particular vehicle, so the enclosure will fit properly in only one specific location.
Inputs: Left and right spring-clip speaker level inputs. The manual includes the wiring codes necessary to
connect the vehicle's speaker wiring to the speaker level inputs.
Inputs: Left and right female preamplifier level (RCA) inputs.
3-pin harness Input:
Power, ground and remote harness.
Rotary control that sets gain. No specification given for range of gain control.
Rotary control that sets crossover point (variable from 50 to 150Hz).
Fuse: There is an installed 15