Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Features
Connections
Features
Power Ratings: The Sound Ordnance M-2250 is a two-channel
Class AB amplifier with an RMS power rating of 175 watts per channel into 4
ohms, and 250 watts per channel into 2 ohms. The amp can also be bridged into
a 4-ohm load for a power rating of 500 watts. Power ratings are measured with
an input power of 14.4 volts.
Crossovers: The M-2250 is equipped with both high-pass and
low-pass crossovers. You can set the low-pass and high-pass cutoff frequencies
independently between 40Hz and 300Hz. A 3-way switch lets you select low-pass,
high-pass, or full range operation. The crossovers have a 12dB per octave slope.
Bass Boost: The amplifier has a bass boost control (labeled
Bass EQ on the amp), centered at 45 Hz and continuously variable from 0dB to +12dB.
Mode Switch: You can easily switch between stereo and mono
operation with the 2-way Mode Switch.
LED Indicators: The M-2250 features two LED indicators: a green
LED that illuminates when the amp is powered on, and a red LED that illuminates when
the amplifier is in protect mode due to overheating or a short circuit in the speaker
wire.
Connections
Removable End Caps: The end caps on the M-2250 are removable
with a 3mm Allen wrench (not supplied) to make it easier to attach the power and
speaker wires.
Power Connections: The power and ground connections are set
screw terminals that will accommodate up to 4-gauge wire. (Due to the fuse rating
of the amp, 8-gauge power and ground wire are recommended.) The remote turn-on
terminal is a set screw terminal that will accept up to 8-gauge wire. A Phillips
head screwdriver (not supplied) is required to tighten/loosen the terminals.
Speaker Connections: The speaker connections are set screw
terminals that will accommodate up to 8-gauge wire. A Phillips-head screwdriver
(not supplied) is required to tighten/loosen the terminals.
RCA Inputs and Outputs: The amplifier features a pair of stereo
RCA inputs for connecting your head unit. There is also a pair of stereo RCA outputs
for feeding the preamp signal to another amplifier, if needed.
Fuses: The M-2250 features two 25-amp ATC blade fuses.
Remote: Although there is an RJ-45 port on the amp labeled
Remote, the port is not functional and no wired remote is available.
