Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features

Overview: This Audioquest Diamondback product contains two 1-meter audio interconnect cables with XLR connectors on each end. They are for connecting high-end balanced audio sources with your XLR input-equipped amplifier or receiver.

Triple-Balanced Design: The Diamondback audio interconnect cables are Triple-Balanced, with three identical insulated conductors and a separate conductor under the foil shield. The two positive signals (inverting and non-inverting) and the negative all get the same low-distortion conduction path. The shield is attached to chassis ground through the case of the XLR, providing extremely effective shielding without contaminating the quality of the negative conducting path.

Solid Conductors: Diamondback interconnects use three 22-gauge solid conductors instead of stranded conductors. Electrical and magnetic interaction between strands in conventional cables are the greatest source of distortion, often causing a somewhat dirty harsh sound. Solid conductors produce less distortion, thus produce a very clean sound.

Metal: Perfect-Surface Copper (PSC) has a very smooth and pure surface. Audioquest's proprietary metal processing technology protects the wire's surface at every stage of drawing and fabrication. High-purity, low-oxide copper is kept soft, pure, and smooth as possible during the manufacturing process, resulting in a very low distortion PSC conductor.

Insulation: All of Diamondback's conductors are insulated using Polyethylene Air Tubes. Air absorbs virtually no energy (which could be stored and released as distortion), and Polyethylene is a low-loss material that causes very little interference or distortion. The conductors and drainwire are wrapped in a Midnight Blue PVC jacket with a black and blue nylon braid on the outside.

Noise-Dissipation System: This cable uses a foil/Mylar/foil shield with 100% coverage to capture RF interference that could modulate the equipment's ground reference. The RF is dissipated through a 22-gauge solid, tinned copper drainwire.