General Features
DVD/Video CD Features
External Device Controls
Inputs and Outputs Notes
General Features
Mobile Multimedia Solutions:
Alpine's line of Ai-NET Mobile Multimedia Solutions allow you to connect and
control a wide range of in-car audio and visual systems, such as DVD/CD/MP3
changers, rear seat monitors, and navigation systems, from an in-dash
control center. In addition, you can add iPod audio/video and control,
Bluetooth, satellite radio, and a USB connection.
Motorized, 6.5" Wide Touchscreen
Monitor: The IVA-D105 has a motorized 6.5" wide, touchscreen monitor (with 16:9
aspect ratio) that serves as a video monitor and system information display.
PulseTouch: The unit's
touchscreen features "PulseTouch," which provides tactile feedback, along with
audible and visual confirmation, to the user to confirm the input of commands.
It uses different vibrations and pressures that simulate what it feels like when
you tap a real button, hold a button down, move a slider or touch where no
screen commands exist.
Automatic Monitor Opening/Closing:
When the Automatic Opening/Closing mode is set to "Full," the monitor
automatically opens when the ignition key is turned to the "Acc" or
"On" position. When the mode is set to "Manual", the monitor
must be opened and closed using the Open/Close button. When the mode is set to
"Close", the monitor automatically closes when the ignition key is
turned off.
Monitor
Angle Adjustment: You can adjust the monitor's angle for better
visibility. The screen angle can be adjusted between 40°
and 105°
(10 positions).
Flat Angle Setting: When you
want to operate some vehicle controls (air conditioner, etc.) that are hidden
behind the raised monitor, you can temporarily position the monitor at a flat
angle by pressing the "Open/Flat" button on the front panel. After 10 seconds in
the flat position, the monitor moves back to its original angle.
Video Lock-out Feature: For
safety and legal reasons, the IVA-D105 features a video lock-out feature to
prevent the viewing of a video source while the vehicle is in motion. To watch a
video source, the vehicle must be parked with the ignition in the ACC or ON
position. The vehicle's parking brake must be engaged, disengaged, and engaged
again while the foot brake is held in.
Illumination Control:
Backlighting is provided by a fluorescent light built into the liquid crystal
panel. The illumination control adjusts the brightness of the backlighting based
on the car's ambient lighting for easier viewing. You can set the minimum level
of backlight in the menu from -15 to +15. The following dimmer settings are
available:
- Auto: adjusts
the brightness of the background illumination of the monitor depending on
the ambient light in your vehicle
- On: keeps the background illumination
of the monitor dark
- Off: keeps the background illumination
of the monitor bright
Background Screen: You have a
choice of 5 different background textures. These backgrounds are visible when a
CD, MP3/WMA, or the tuner is selected. When "Auto Background" is activated, the
background texture will change each time the ignition key is turned off and
turned on again.
Display Modes: You can select one of the following display modes:
- Mode 1 (Wide): evenly
stretches a 4:3 picture horizontally to fit the wide screen monitor
- Mode 2 (Cinema): displays a
4:3 picture by stretching out the picture horizontally and vertically. This
mode is good for displaying a cinema-type picture with a 16:9 ratio.
- Mode 3 (Normal): displays a
4:3 picture at the center of the screen with a vertical black band at each
side
Visual EQ Mode: allows you to
select one of the following preset modes suitable for the subject image:
- Night Mode: suitable for
movies in which dark scenes frequently appear
- Soft: suitable for CGs and
animated films
- Sharp: suitable for old
movies where images are not clearly shown
- Contrast: suitable for
recent movies
- User Memory (P-1, P-2):
You can change and save Brightness, Color, Tint, Contrast, and Sharpness
values from any of the presets in up to two user memories
Data Download: You can download
data from Alpine's website to a CD-R or CD-RW and download and store the data in
the IVA-D105. You can download different visual backgrounds for the monitor.
DVD 5.1-channel Operation:
When playing a DVD encoded in Dolby Digital or DTS, the IVA-D105 can decode and
play the DVD in 5.1 channels. The unit has 4 speaker outputs and 5.1-channels of
preamp outputs including a subwoofer and center channel output. During
5.1-channel playback, you can also set or adjust Time Correlation, Subwoofer low
pass filter, Dolby Pro Logic II, Rear Fill, Speaker selection, Multi-channel
setup, Speaker setup, Bass sound control, and User Presets.
MP3/WMA/AAC Playback: This unit can play CD-ROM, DVD-R, DVD-RW, CD-R, and CD-RW discs containing MP3,
WMA, and AAC files
recorded using the ISO 9660 Level 1 or Level 2 formats; constant and variable
bit rates from 32 kbps to 320 kbps are supported for MP3 and WMA, and bit rates
of 16-320 kbps for AAC. Discs recorded using Joliet,
Romeo, or other ISO 9660 compliant formats can be played, but file and folder
names may not be displayed correctly. ID3 tag v1 and WMA tags are supported; track title, artist name and
album name ID3 tag data can be displayed.
Steering Wheel Remote Compatibility: The
IVA-D105 has a steering remote control input on the back panel. When used with
the optional SWI-JACK interface (item number 127SWIJACK), you can retain the use
of your factory steering wheel and/or rear seat radio controls when replacing
the factory head unit in select vehicles. The SWI-JACK is compatible with over
95% of the vehicles made from 1986 to the present. Compatible vehicles include
many Acura, Audi, BMW, Buick, Cadillac, Chevrolet, Chrysler, Dodge, Ford, GMC,
Honda, Hummer, Infiniti, Isuzu, Jaguar, Jeep, Kia, Land Rover, Lexus, Lincoln,
Mazda, Mercury, Mini, Mitsubishi, Nissan, Oldsmobile, Plymouth, Pontiac, Saab,
Saturn, Suzuki, Toyota, and Volkswagens and Harley Davidson motorcycles. Please
consult "Outfit My Car" to see if your vehicle is compatible.
DVD/Video
CD Features
Disc Compatibility: The
IVA-D105 is compatible with DVD-Video, DVD-Audio, DVD-R, DVD-RW, DVD+R, DVD+RW,
Video CDs, Audio CDs, CD-R, and CD-RW. In addition, the unit can play CD-R,
CD-RW, and CD-ROM discs with MP3, WMA, and AAC files.
DVD Menu Direct Touch Control:
The unique PulseTouch touchscreen allows you to activate selections on the DVD
main menu by directly touching the screen on the desired selection instead of
navigating choices using cursors.
Pre-stop Function: When the
Pre-stop function is used, the position at which playback is stopped is stored
in the memory, and playback resumes from that position.
Step/Slow Motion Playback:
When a DVD or Video CD is in the pause mode, you may move forward or backward through the
program being played one step (frame) at a time, or in one of the following slow
motion speeds: 1/2 or 1/8.
Fast-Forward/Fast-Reverse:
While a DVD or Video CD is playing, you can view the program in double speed in
either direction by touching and holding the fast-forward or fast-reverse button
on the touchscreen for more than 1 second. If held for 5 or more seconds,
playback at 8x speed in the selected direction will begin. If held for 10 or
more seconds, playback is forwarded or reversed at 21x normal speed.
Multi-Angle Display: This
function allows you to choose the viewing angle of scenes that were shot from a
number of different angles. Note: This function is
limited to DVDs recorded with multiple camera angles.
Multi-Audio Tracks: DVDs can
have up to 8 different audio tracks. You can switch between each recorded audio
tracks during playback.
Audio Adjustments: You can
adjust the bass level (-7 to +7), bass center frequency (60Hz, 80Hz, 100Hz, or
120Hz), bass bandwidth or Q-factor (1.00, 1.25, 1.5, 2.0), treble level (-7
to +7), treble center frequency (10kHz, 12.5kHz, 15kHz, 17.5kHz), loudness
(on/off), and subwoofer level (0 to 15).
Parental Lock:
Parental Lock allows you to restrict the playback of DVDs that are unsuitable
for younger viewers. You can select a parental lock rating from 0-8, which is
protected by a 4-digit password.
External Device Controls
Satellite Radio Ready: There
are several options for connecting an optional XM or SIRIUS Satellite Radio
receiver to this receiver:
HD Radio Ready: The optional
Alpine HD Radio Receiver (item # 500TUAT550) delivers FM radio with CD-like
audio quality and AM with FM-like quality. Song, artist, and album titles are
viewable on the display.
Navigation Ready: When
connected to an optional Alpine Navigation unit (such as the NVE-N872A), the
navigation screen and map data can be displayed on this unit. With the NAV.MIX
feature, the voice guidance
of the navigation system will be mixed with the radio or CD audio. The volume level of the voice guidance
can be adjusted.
iPod Integration: An iPod can
be connected to the IVA-D105 by using the proprietary Alpine KCE-422i Full Speed
connection cable (item # 500KCE422i). When the iPod is connected to the unit,
the controls of the iPod are non-functional, and the unit is fully controlled by
the head unit. The unit can be used with Generation 3 and above iPod, iPod
photo, iPod mini, or iPod nano only.
USB Adapter Ready: With the
optional KCA-620M USB Adapter, you can play your USB thumb drive or USB-based
portable MP3 player through the IVA-D105.
Bluetooth Ready: With the
optional KCA-300BT Bluetooth adapter (item # 500KCE300B), you can make and
receive calls hands-free on your Bluetooth-capable cellular phone, and
communicate through an included microphone and your vehicle's speakers.
Changer Controls: This unit is
compatible with 6 and 12-disc Alpine Ai-NET CD changers; also, this unit can
control Alpine Ai-NET CD/MP3 changers and DVD changers. Alpine M-Bus CD changers
cannot be controlled by this unit. With
the addition of an optional adapter, more than one CD changer can be controlled. You
can also use the KCA-410C Versitile Link adapter to connect 2 changers and 2
auxiliary input sources. When connected to
a text capable changer, this unit can display text data from CD Text encoded CDs
and MP3 CDs.
Auxiliary Input Ready: With the
addition of the optional KCA-121B Ai-NET/RCA interface cable, the KCA-801B
auxiliary input adapter, or the KCA-410C Versatile-Link Terminal, the audio from
an auxiliary source can be played through this unit. When the KCA-121B interface
cable is used, a CD changer cannot be connected to the head unit; the KCA-801B
auxiliary input adapter allows you to connect an auxiliary source and an Ai-NET
changer to the head unit. The KCA-410C Versatile-Link Terminal allows you to
feed audio from up to two auxiliary sources and two Ai-NET CD changers to the
head unit.
External Audio Processor: When
an optional Alpine external audio processor (such as the PXA-H700 or PXA-H701) is connected to this unit, you can
operate it from the unit. Dozens of settings can be adjusted, including
crossover adjustment, time correction, phase switching, EQ adjustments, surround
sound adjustments, and speaker levels.
Inputs and Outputs Notes
Main Unit: The following inputs
and outputs are located on the back of the main (in-dash) unit:
- RGB Input: A 13-pin female
connector for use with an optional Alpine navigation unit, such as the
NVE-N872A (500NVEN872).
- AV Connector: A 20-pin
connector for use with the supplied A/V harness which includes the following
connections:
- Preamp Outputs: 6 channels
of preamp outputs, including RCA jacks for Front left and right, Rear left
and right, Center, and Subwoofer channels.
- Auxiliary A/V Input:
Stereo RCA and composite RCA
video input (marked "Aux Input") for connecting an optional VCR or game
console.
- Auxiliary A/V Output:
Stereo RCA and composite
RCA video output (marked "Aux Output") for connecting an optional video monitor
- iPod Direct Connector: A
D-shaped, 10-pin jack designed for exclusive use with the
optional Alpine KCE-422i iPod Full Speed adapter (item # 500KCE422i).
- Rear Camera Input: A
composite RCA video input, on a 6" pigtail hardwired to the rear panel, for
connecting an optional rear-view camera
- Optical Digital Output:
A standard Toslink optical digital output on the end of a 19" cable for connecting the unit to an optional
multi-channel audio processor, such as the PXA-H701 (500PXAH701). Note:
No optical cables are supplied with the PXA-H701.
- Ai-NET: One Ai-NET connector
on a 15" cable is
provided for connecting a CD changer, DVD changer, or other Ai-Net compatible
component
- Steering Wheel Remote Control
Interface: A 3.5mm minijack on a 6" pigtail for connecting to a steering
wheel remote interface box, such as the PAC SWI-JACK (item # 127SWIJACK).
- Wiring Harness: 10-pin
female Molex connector on chassis for power, speakers, reverse, parking brake and
foot brake detection harness
- Remote Control Input/Output
Leads: Two white/brown wires to output controlling signals from the
remote control, and to connect the external Alpine product to the remote
control lead.
- Reverse Lead:
If a
rear-view camera is connected to the A/V input, this reverse lead
(orange/white wire) should be connected to the vehicle's back-up lamp circuit.
When properly connected, the image from the rear-view camera appears on the
monitor when the vehicle is shifted into reverse.
- Monitor Control Lead:
White/pink control lead for connecting to a touch panel-compatible rear
monitor
- Antenna: Standard Motorola
female antenna jack on 6" cable
