Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features

Overview: The Niles Audio CM7MP Ceiling Mount speaker is designed for multi-purpose applications, and non-primary listening areas. It can be used as a left or right speaker in a stereo configuration, or left, center, or right in a home theater application. The CM7MP comes with a magnetically-attached paintable metal grille.

Note: The CM7MP is packaged as a single speaker.

Drivers: The CM7MP has a light, but strong 7" glass fiber cone woofer. The integrated woofer/baffle design enhances the low frequency response, and allows you to mount a 7" speaker in locations where many competitor's speakers with the same frame diameter can only use a 6-1/2" driver. The 1" fluid-cooled UltraSilk soft dome tweeter provides clear, detailed highs and a focused high frequency sound. The proprietary bridge-mounted pivoting tweeter adjustment lets you aim the sound up to 20° in any direction.

Grille: The CM7MP includes a 10" diameter MicroThin grille, which attaches magnetically to the speaker. The 1/4" thick grille is easy to install, and blends with the room's aesthetics. It is rust-resistant, and paintable to match any décor. An optional SG7C square grille is also available, if desired.

Weather-Resistant: The frame, speaker, and grille are weather-resistant, so you can install the speaker in moist environments, including bathrooms and outdoors under eaves.

Speaker Terminals: The CM7MP is equipped with spring clip terminals, which can accept up to 12-gauge speaker wire. For wire runs of less than 80 feet, 16-gauge wire is recommended. You should use 14-gauge wire for runs of 80-200 feet, and 12-gauge wire for runs over 200 feet.

Note: When running speaker wire inside walls or ceilings, special jacketed cable (CL-2 or CL-3) should be used to protect the wire and for fire prevention. If unsure, you should consult your local building inspectors about code compliance requirements.

Installation: Installing the speaker requires a 8-1/2" cutout. The speaker requires a depth of 3-3/4" behind standard 5/8" drywall. There are three spring-loaded mounting clamps with screws that tighten from the front.