Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Audio Features
Video Features
Network Functions
USB/iPod Connectivity
Multi-Zone Capability
Convenience Features
Remote/Bluetooth Control

Audio Features

Direct Energy Amplifier: The Direct Energy Amplifier creates a wide range frequency response that makes it ideal for reproducing new high resolution audio formats. With this proprietary amplifier design, Pioneer's engineers have found the key to managing the wide fluctuations in heat that can significantly alter the overall audio performance of each of the discrete amplified channels. By utilizing a new temperature compensation circuitry of the temperature fluctuations are effectively minimized between channels to maintain high quality audio from all connected devices. The Direct Energy amplifier also features a low impedance, high current, and compact circuit design to maximize performance in the critical output stages.

90-Watt x 7.2ch Amplifier: The Pioneer VSX-1122-K Multi-Channel A/V receiver is equipped with a 7-channel amplifier rated at 90 watts (into 8-ohms, at 20Hz-20kHz, with 0.08% THD, driving 2 channels) and dual subwoofer (LFE) preamp outputs.

Amplifier Assignment: The VSX-1122-K supports up to 7.2 channels (Front L/R, Center, Surround L/R, Surround Back L/R, and Dual SW) for surround sound playback. The seven amplifier channels built into the receiver are typically used for 7.1 channel surround in the main room, but there are various amplifier configurations to accommodate your home theater setup:

• 7.2ch (Front Height): A 7.2ch surround system connects the front speaker (L/R), center speaker, front height speakers (L/R), surround speakers (L/R), surround back speakers (L/R), and subwoofers (1/2). It is not possible to produce sound simultaneously from the front height speakers and the surround back speakers.
• 7.2ch (Front Wide): This 7.2ch configuration replaces the front height speakers (L/R) with front wide speakers (L/R). It is not possible to produce sound simultaneously from the front wide speakers and the surround back speakers.
• 5.2ch w/ Front Bi-Amp: You can configure the amplifier for front bi-amp operation to achieve a higher-quality 2-channel sound by connecting the receiver's front and surround back channels to your main front speakers (if compatible). Receiver will be limited to 5.2ch surround.
• 5.2ch + Speaker B: With this speaker configuration you can simultaneously enjoy 5.2ch surround sound in the main zone with stereo playback of the same audio  on the B speakers (L/R) in another room. This same configuration also allows for 7.2ch surround sound in the main zone when not using the B speakers.
• 5.1ch + Zone 2: With this type of speaker configuration you can simultaneously enjoy 5.2ch surround sound in the main zone with stereo playback of another audio component in a second zone. The select of input devices is limited in Zone 2.

Audio Connections: Here is a lists of some of the audio connections that you'll find on the VSX-1122-K A/V receiver. 

• Digital Inputs: The Pioneer receiver is equipped with two optical digital inputs and two coaxial digital input.
• Speaker Outputs: The receiver has binding post terminals for all speaker outputs (Front L/R, Center, Surround L/R, Surround Back L/R, Front Height/Wide/B). The binding posts can accept bare wire, pin connectors, and single banana plugs. The terminals are spaced too far apart for dual banana plugs. The collar surrounding the binding post terminals prevent the use of spade connectors.
• Headphones: When headphones are plugged into the full-size 1/4" jack on the front panel, all the speakers are automatically muted.

192kHz/24-bit Digital-to-Analog Converter:  This receiver is equipped with 192kHz/24-bit DACs to decode and playback high-resolution recordings with clearer sound.

Texas Instruments Aureus DSP Engine: The Pioneer VSX-1122-K is equipped with a Texas Instruments (TI) Aureus Digital Signal Processor (DSP) Engine for better surround sound reproduction.

Advanced MCACC Setup: The Advanced MCACC (Multi Channel Acoustic Calibration) system was developed in Pioneer's laboratories with the aim of making it possible for home users to perform adjustments of the same level as in a studio easily and with high precision. The acoustic characteristics of the listening environment are measured and the frequency response is calibrated accordingly to allow high precision, automatic analysis and optimal calibration of the sound field to bring it closer to a studio environment than ever before. Furthermore, while it was previously difficult to eliminate standing waves, this receiver is equipped with a standing wave control function using a unique process to perform acoustic analysis and reduce their influence. You can choose to calibrate the soundfield automatically or fine-tune the soundfield data manually.

• Auto MCACC Setup: The VSX-1122-K features Pioneer's exclusive Multi-Channel Acoustic Calibration system (MCACC), providing a near studio-quality, multi-channel listening experience customized specifically to your listening environment. The Auto Multi-Channel Acoustic Calibration (MCACC) setup measures the acoustic characteristic of your listening area, taking into account ambient noise, speaker size and distance, and tests for both channel delay and channel level. The included microphone measures every speaker's connection, and notes its size, distance from the listening point, sound levels, and timbre to calibrate and maximize performance specifically for your room. After you have setup the microphone provided with the VSX-1122-K, the receiver uses the information from a series of test tones to optimize the speaker settings and equalization for your particular room.
  • 3 Correction Curves: After a single calibration is performed, each of the following three correction curves can be stored separately in the MCACC memory. SYMMETRY implements symmetric correction for each pair of left and right speakers to flatten the frequency-amplitude characteristics. ALL CH ADJ is a 'flat' setting where all the speakers are set individually so no special weighting is given to any one channel. FRONT ALIGN sets all speakers in accordance with the front speaker settings (no equalization is applied to the front left and right channels.
  • EQ Pro & S-Wave: In addition to measurements at the listening position, you can use two more reference points for which test tones will be analyzed for standing waves. This is useful if you want to get a balanced 'flat' calibration for several seating positions in your listening area. Place the microphone at the reference point indicated on-screen and note that the last microphone placement will be at your main listening position.
• Manual MCACC Setup: You can use the settings in the Manual MCACC setup menu to make detailed adjustments, after the Auto MCACC Setup has completed.
  • Fine Channel Level: You can achieve better surround sound by properly adjusting the overall balance of your speaker system. You can adjust the Channel Level of each speaker in 0.5 dB increments (+/-12dB).
  • Fine Speaker Distance: For proper sound depth and separation with your system, it is necessary to add a slight bit of delay to some speakers so that all sounds will arrive at the listening position at the same time. You can adjust the distance of each speaker in half inch increments, up to 25.5'.
  • Standing Wave: Acoustic standing waves occur when, under certain conditions, sound waves from your speaker system resonate mutually with sound waves reflected off the walls in your listening area. This can have a negative effect on the overall sound, especially at certain lower frequencies. Depending on speaker placement, your listening position, and ultimately the shape of your room, it results in an overly resonant (boomy) sound. The Standing Wave Control uses filters to reduce the effect of overly resonant sounds in your listening area.
  • EQ Adjust: Acoustic Calibration Equalization is a kind of room equalizer for your speakers (excluding the subwoofer). It works by measuring the acoustic characteristics of your room and neutralizing the ambient characteristics that can color the original source material (providing a 'flat' equalization setting).
  • EQ Professional: This setup minimizes the unwanted effects of room reverberation by allowing you to calibrate your system based on the direct sound coming from the speakers. Performing the Acoustic Calibration EQ Professional procedure is effective when the lower frequencies seem overly reverberant in  your listening room.

X-Curve: Most soundtracks mixed for cinema sound too bright when played back in large rooms. The X-Curve setting acts as a kind of re-equalization for home theater listening, and restores proper tonal balance of movie soundtracks.

PQLS: PQLS (Precision Quartz Lock System) is a digital audio signal transfer control technology using the HDMI Control function. It offers  higher-quality audio playback by controlling audio signals from the receiver to a PQLS compatible Pioneer Blu-ray player. This enables removing jitter that has a negative effect on the quality of the sound and is generated upon transmission.

Listening Modes: The Pioneer VSX-1122-K offers a variety of listening modes to accommodate playback of various audio formats.

Stereo
Stereo		Sound is output by the front left and right speakers and subwoofer.
Stereo ALC		The unit equalizes playback of sound levels when your music tracks are recorded at different volume levels.
Straight Decode		No additional effects (tone control, etc.) are added to the stereo source.
Dolby Pro Logic
Dolby Pro Logic		Dolby Pro Logic is a matrix decoding technology developed by Dolby Laboratories. Dolby Pro Logic processes any high-quality stereo (two-channel) movie and music audio into four playback channels of surround sound - Front Left, Front Right, Center, Mono-Surrounds.
Dolby Pro Logic II		Dolby Pro Logic II transforms high-quality stereo sound into 5.1-channel surround sound. Thanks to its full-range performance, you will hear all the detail and subtleties of a compelling five-channel Dolby surround sound mix from a stereo signal. You can choose between three DPL II modes - Movie, Music, or Game.
Dolby Pro Logic IIx		Dolby Pro Logic IIx transforms high-quality stereo and 5.1ch sound into 6.1- or 7.1-cchannel surround sound. With Dolby Pro Logic IIx you experience engaging, natural surround sound. Special effects are more realistic than you ever thought possible. Your movies and television programming sound richer, with more depth. You can choose between three DPL IIx modes - Movie, Music, or Game.
Dolby Pro Logic IIz		Providing a dramatic listening alternative for 7.1 systems, Dolby Pro Logic IIz brings the added dimension of height to create an immersive 7.1-channel surround sound experience from any stereo, 5.1, 6.1, or 7.1 movie, music, TV, or game audio source. Dolby Pro Logic IIz identifies and processes ambient sound energy and directs this information to front height speakers in a 7.1-channel environment.
Wide Surround
Wide Surround Movie		Up to 7.1-channel sound (with front-wide speaker effects), especially suite to movie sources.
Wide Surround Music		Up to 7.1-channel sound (with front-wide speaker effects), especially suite to movie sources.
Dolby Digital
Dolby Digital		Dolby Digital has been selected as the default format for DVD video, standard 2 channel audio playback and HDTV Digital broadcasting. Dolby Digital features two independent surround channels giving same full range as the three front channels. Plus it adds a Low Frequency Effect channel LFE. Dolby Digital accomplishes this by using a technique called compression.
Dolby Digital EX		Dolby Digital EX takes the Dolby Digital 5.1-channel setup one step further with an additional center surround channel (reproduced through one or two speakers) for extra dimensional detail and an enveloping surround sound effect.
Dolby Digital Plus		Dolby Digital Plus is based on core Dolby Digital technologies. Dolby Digital Plus is an advanced surround sound audio codec designed specifically for evolving media. Dolby Digital Plus brings cinematic sound to Blu-ray, broadcast, online, game, and mobile phone entertainment (up to 7.1ch)
Dolby Digital TrueHD		Dolby TrueHD produces audio that is identical to and every bit as spectacular as the master recording. It lets you experience the full potential of Blu-ray Disc (up to 7.1ch), and is even ready for future HD delivery formats.
DTS
DTS		DTS (Digital Theater Systems) uses the same concept as Dolby Digital, but implements a lower compression rate. This leads to more dynamic range, improved channel separation, and more subtle nuances.
DTS-HD	High Resolution Audio	DTS-HD High Resolution Audio is an improved version of the conventional DTS, DTS-ES and DTS 96/24 signals formats, compatible with sampling frequencies of 96 or 48 kHz and up to 7.1 channels of discrete digital sound. High data bit rate performance provides high quality sound. This format is fully compatible with conventional products, including conventional DTS digital surround 5.1-channel data.
	Master Audio	DTS-HD Master Audio is a lossless audio format created by Digital Theater System (DTS). This format provides the facility to support up to 8 audio channels with a sampling frequency of 96kHz/24bit resolution and up to 6 audio channels with a sampling frequency of 192kHz/24bit resolution. It is fully compatible with conventional products, including conventional DTS digital surround 5.1-channel data.
DTS 96/24		DTS 96/24 offers a higher quality level of multi-channel audio (up to 5.1 channels) for standard DVDs. The "96" refers to a 96kHz sampling rate (compared to the typical 48kHz sampling rate.) The "24" refers to 24-bit depth, compared to 16-bit depth used for CD sound, which means there is more audio information present.
DTS Express		DTS uses a system called DTS Express to deliver Secondary or Sub Audio to your player. The DTS Express audio is mixed with the Primary Audio, giving you an intensely great interactive surround experience.
DTS-ES		DTS-ES delivers 6.1 channels of discrete or matrixed audio. Movies encoded in DTS-ES will dramatically intensify the DTS surround effect with the addition of a surround center-channel speaker.
DTS Neo: 6		DTS Neo:6 takes 2-channel (stereo) audio and completely transforms it into up to six full-bandwidth matrix channels of surround sound. Your home theater system will produce six and five separate channels, respectively, to match your speaker layout. DTS Neo:6 can also generate a center surround channel from 5.1 material. You can choose between two DTS NEO: 6 modes - Cinema or Music.

Note: Dolby Digital and DTS listening modes can only be selected if your audio source is connected to the AV receiver via a digital audio connection (HDMI, optical or coaxial). To enjoy true 7.1ch Dolby Digital TrueHD and DTS-HD surround sound, the receiver must be connected to your Blu-ray player via HDMI.

Surround Parameters: You can adjust the following surround mode parameters:

• Dolby Pro Logic II Music Settings: While listening in the Dolby Pro Logic II Music format, there are three further enhancements you can adjust:
  • Panorama: Broadens the front stereo image to the surround speakers to provide a wraparound effect, especially effective when there is limited output from the surround channels, panorama can be turned on/off in the menu.
  • Dimension: Allows you to move the sound field forward or backward.
  • Center Width: Allows you to adjust the width of the center channel.
• Center Image: In the Neo:6 Music mode, the Center Image feature adjusts the output of the left and right channels relative to the center channel, allowing you to make the center channel more or less dominant as needed. This improves the image of the center channel, especially when the listener is off-center. Adjustment varies from 7 (nothing subtracted from the L/R channels) to 0 (L/R channel output is cut in half).
• Dolby Pro Logic IIz Settings: While listening in the Dolby Pro Logic IIz format, you can adjust the following parameters:
  • Height Gain: Adjust the volume (Low/Mid/High) of the Front Height channels in Dolby Pro Logic IIz. 
  • V.Height: When you're not using front height speakers, selecting this mode allows you to hear a virtual front height channel through your front speakers.
• V.SB: When you're not using surround back speakers, selecting this mode allows you to hear a virtual surround back channel through your surround speakers.
• Virtual Depth: When this mode is selected, the soundfield expands virtually behind the display, resulting a soundfield with the same depth as the 3D picture to achieve a better sense of presence.

Advanced Surround: The Advanced Surround feature creates a variety of surround effects for various soundtracks.

Note: You can set the effect level (10-90) for the currently selected Advanced Surround mode.

Stream Direct: Use the Stream Direct modes when you want to hear the truest possible reproduction of a source. All unnecessary signal processing is bypassed.

Audio Improvements: The Pioneer VSX-1122-K provides various audio improvement settings to make whatever you are listening to sound its best.

• Advanced Sound Retriever: Even compressed audio such as WMA, MP3, and AAC is enhanced with another Pioneer exclusive, Advanced Sound Retriever, by filling in areas where subtle details were left out during the compression process. When audio data is removed during the compression process, sound quality often suffers from an uneven sound image. The Sound Retriever feature employs new DSP technology that helps bring CD quality sound back to compressed 2-channel audio by restoring sound pressure and smoothing jagged artifacts left over after compression.
• Phase Control: The A/V receiver's Phase Control feature uses phase correction measurements to make sure your system's sound arrives at the listening position in phase, preventing unwanted distortion and/or coloring of the sound. Phase Control technology provides coherent sound reproduction through the use of phase matching for an optimal sound image at your listening position.
• Up Mix Function: In a traditional 7.1-channel surround system with surround speakers placed directly at the sides of the listening position, the surround sound of 5.1-channels sources is heard from the side. The Up Mix function mixes the sound of the surround speakers with the surround back speakers so that the surround sound is heard from diagonally to the rear as it should be.
• Dialogue Enhancement: Localizes dialog in the center channel to make it stand out from other background sounds in a TV or movie soundtrack. By moving from UP1 through UP2 and UP3 up to UP4, you can make the sound source seem to relocate upwards.
• DNR: This function may improve the quality of sound in a noisy source (for example, video tape with lots of background noise) when switched on. This only has an effect with 2-channel signal inputs.
• Hi-Bit 24: This feature creates a wider dynamic range with digital sources; like CDs, DVDs, or BDs. Smoother, more delicate musical expression can be achieved by converting 16-bit PCM or 20-bit compressed audio signals to 24-bit.

Audio Level Controls: The Pioneer VSX-1122-K offers a variety of audio level controls to enhance your listening experience.

• Auto Level Control: The Auto Level Control equalizes volume differences between portable audio tracks or television programming and eliminates jarring volume changes.
• Dynamic Range Control: This function adjusts the level of dynamic range for movie soundtracks optimized for Dolby Digital/DTS formats. This feature is helpful when listening to Dolby Digital/DTS soundtracks at low volume levels.
• Midnight Listening: The Midnight Listening mode allows you to hear effective surround sound of movies at lower volumes.
• Loudness: The Loudness function is used to get good bass and treble from music sources at low volumes.
• LFE Attenuate: Dolby Digital and DTS audio sources can include ultra-low bass tones. Set the LFE Attenuator as necessary to prevent the ultra low bass tones from distorting the sound from the speakers. The LFE attenuator can be set to 0, -5, -10, -15, or -20 dB.
• Analog Input Attenuate: The analog input attenuator lowers the input level of an analog signal when it's too strong.

AM/FM Tuner: The Pioneer VSX-1122-K is equipped with a built-in AM/FM tuner with 63 preset stations. For easier identification, you can name all of your saved preset stations. The receiver includes an external indoor AM loop antenna and FM wire antenna.

Video Features

8 HD Inputs: The Pioneer VSX-1122-K is equipped with 8 HD inputs. Seven HDMI 1.4a inputs (up to 1080/24p capable) let you connect a high-definition satellite receiver, Blu-ray Disc player, and game system for high definition video and audio. One component input (1080/60i capable) provides added HD-capable connectivity and versatility.

• HDMI: The receiver is equipped with seven HDMI v.1.4a inputs (6 rear/1 front) for connecting HDMI-equipped audio/video components. All seven HDMI inputs are capable of carrying uncompressed digital audio and 3D 1080p video There is also an HDMI (v.1.4a) output which supports the ARC function that feeds audio/video signals to an HDTV.
• HD Component Video: This unit features a single component video input. The component video jacks are capable of accepting high-definition video signals (up to 1080i).

1080p Video Upconversion: The VSX-1122-K provides video conversion from composite and component video to HDMI for a single-wire high-definition audio/video solution, as well as up to 1080p video scaling (powered by the Marvel Qdeo 1080p/24fps Video Scaler) for an exceptional high definition picture, regardless of the source.

3D-Ready: The Pioneer VSX-1122-K is compatible with 3D-ready Blu-ray disc movies, video games, and other 3D content through its HDMI (v.1.4a) connections.

Note: 3D viewing requires 3D-ready source with 3D content, 3D-ready HDTV, 3D glasses, and high-speed HDMI cable. Other 3D accessories may also be needed.

Deep Color & x.v.Color Support: The VSX-1122-K also supports Deep Color and x.v.Color content, which can display a larger color range than standard-definition schemes. The result is a more lifelike, vibrant picture.

A/V Sync: Some monitors have a slight delay when showing video, so the soundtrack will be slightly out of sync with the picture. The receiver can automatically correct this problem (via HDMI) or it can be fixed manually.

• Auto Delay: This feature automatically corrects the audio-to-video delay between components connected with an HDMI cable. The audio delay time is set depending on the operational status of the displayed connected with an HDMI cable. The video delay time is automatically adjusted according to the audio delay time.
• A/V Delay: By manually adding a bit of delay (0-9), you can adjust the sound to match the presentation of the video.

ARC (Audio Return Channel): This feature allows audio to be sent from your compatible HDTV to your receiver through the same HDMI cable already being used to send audio and video to your HDTV. This eliminates the need for extra cables connected to your television.

HDMI Standby Through: HDMI Standby Through mode lets video and audio signals pass through the VSX-1122-K to the TV even when the receiver is off. You can select between 3 HDMI Through functions modes.

• Last: The HDMI Through function is activated on the input source selected at the time of setting the AV receiver to the "standby" mode.
• Source: Selects the input source (BD, DVD, Sat/Cable, Game) for which the HDMI Through function in enabled.
• Off: The HDMI signal will be output during standby mode.

Video Settings: The Pioneer VSX-1122-K offers a number of video adjustments.

• Pure Cinema: This setting optimizes the operation of the progressive scanning circuit for playing film material.
• Progressive Motion: This function adjusts the motion and still picture quality when video output is set to progressive.
• Stream Smoother: This feature improves elements that reduce picture quality mainly noticeable in network content, such as mosquito noise and block noise.
• Video Adjustment: You can set the optimum picture quality for the type of monitor display; Plasma, LCD, Front Projection, or Professional Monitor.
• Picture Adjustments: You can make the following picture adjustments; Detail (edge enhancement), Sharpness (detail), Bright (brightness), Contrast (lights/darks), Hue (reds/greens), Chroma (saturation), Blacks (black level).
• Noise Reduction: The receiver offers the following noise reduction settings; YNR (luminance noise reduction), CNR (color noise reduction),  (block noise reduction), and MNR (mosquito noise reduction).

Network Functions

Home Media Gallery: The Pioneer A/V Receiver's Home Media Gallery function allows you to stream audio files from your DLNA compliant computer, access your iTunes music via AirPlay, and listen to Internet Radio Stations from vTuner, Pandora, and SiriusXM; all through your home network. The VSX-1122-K is fitted with an Ethernet (LAN) port and is also WiFi ready.

• Ethernet (LAN) Port: The Pioneer VSX-1122-K is fitted with a rear-panel RJ-45 Ethernet (LAN) Port. By connecting this receiver to the your home network via the LAN terminal (10BASE-T/100BASE-TX), you can play audio files stored on your computer, listen to Internet Radio, and stream iTunes via AirPlay, and download firmware updates.
• Wireless Ready: Wireless connection to your home network is possible through the use of the Pioneer Wireless Network Adapter (130ASWL300, sold separately). The AS-WL wireless network adapter provides wireless (2.4GHz) connectivity for the Pioneer VSX-1122-K to your wireless (IEEE802.11b/g/n)  home network. The AS-WL300 supports WPS (WiFi protected setup), WEP (64/128 bit), or WPA/WPA2 (TKIP/AES) security settings.

Note: The wireless network adapter connects to receiver's rear-panel Ethernet port and USB port.

Internet Radio: The Pioneer VSX-1122-K lets you access various Internet Radio providers through its wired or wireless network connection. The VSX-1122-K will display station name and program-related information, such as - artist name, song title, and elapsed playing time. You can preset up to 65 of your "favorite" Internet radio stations for easy recall.

DLNA Certified (1.5): The Pioneer VSX-1122-K is DLNA 1.5 certified. This means you can stream your MP3, AAC, WMA, WAV, or even FLAC music files from your Windows PC or laptop to the Pioneer A/V receiver. This unit allows for the streaming of audio files stored on the following devices.

• PCs running Microsoft Windows Vista or XP with Windows Media Player 11 installed.
• PCs running Microsoft Windows 7 with Windows Media Player 12 installed.
• DLNA-compatible digital media servers (on PCs or other components).

Playable File Formats: The Home Media Gallery feature of this receiver supports the following file formats.

Parental Lock: You can set restrictions for using Internet services. These restrictions are protected by a user pass-code.

Firmware Updates: You can download firmware updates from the Pioneer Website for the Pioneer A/V receiver using either an Ethernet (hardwired) or WiFi (wireless) connection. The tested Pioneer AV receiver had an immediate firmware update (1-157-076-014-191), as of 5/8/2012. Visit Pioneer's A/V Receiver Support Site for the latest firmware updates.

USB/iPod Connectivity

USB Port: It is possible to play audio files and JPEG still-image files by connecting a USB mass storage class memory device (such as your USB thumbdrive, smartphone, tablet, or Android device) to the A/V receiver's front-panel USB (type-A) port. Slideshows of photo files can be played while listening to music files. Compatible USB devices must be mass storage class compliant and formatted in FAT16/32. The receiver's remote control can be used for basic playback of files stored on your USB memory device. The USB function of this receiver supports the following file formats.

Note: Copyrighted and DRM-protected audio files cannot be played back. Not compatible with all USB devices. This receiver does not support USB hubs.

AirPlay: With AirPlay you can stream music from iTunes to the VSX-1122-K and play it through your home theater system. Simply connect the receiver to your home network via Ethernet or Pioneer's optional wireless adapter (AS-WL300, sold separately) and it instantly becomes the hub for playback of your iTunes music from your connected Apple device or networked computer. You can even use the receiver to view metadata including song title, artist as well as album art on a connected display monitor. Download Apple's free "Remote" application and your can use your Apple device as the remote control.

Note: AirPlay supports PCs or MACs with iTunes 10.1 or later. AirPlay is compatible with the iPod touch, iPhone, and iPad with iOS 4.2 or later.

Direct iPod/iPhone/iPad Connection: The Pioneer VSX-1122-K's front-panel USB port and A/V input (via the included USB/video cable) allows you to control playback of audio/video content from your iPod, iPhone, or iPad using the controls of this receiver. You can enjoy music, videos, still-images, and apps stored on your iPod, iPhone, or iPad through the Pioneer A/V receiver (videos/photos are output via composite or HDMI). You can control your iPod, iPhone, or iPad device directly; or from the VSX-1122-K's included IR remote, front-panel display, and on-screen menu (via HDMI only). You can browse songs stored on your iPod, iPhone, or iPad by Playlist, Artist, Album, song, Podcast, Genre, Composer, Audiobook, or Shuffle. You must use the clickwheel or touchscreen of your Apple device for video and photo control. The Apple device will charge automatically when connected.

Note: If you have an iPod nano (7th gen), iPod touch (5th gen), or iPhone 5; use the Lighting-to-USB cable that came with your Apple device to connect to the head unit. These Apple devices are limited to audio playback only (no video out).

iPod/iPhone/iPad Compatibility Chart: The VSX-1122-K is "Made for iPod/iPhone/iPad" compatible and supports the following iPod, iPhone, and iPad devices (as of 9/27/2012):

Note: Apple iPod/iPhone software updates may change functionality results. If you download a newer software version, you may need to reset the head unit and your iPod/iPhone to regain functionality. If this doesn't work, you may need to wait until a newer software update is available.

Multi-Zone Capability

Multi-Zone: This receiver can accommodate up to two independent systems in separate rooms after you have made the proper Multi-Zone connections. The same audio source or different audio sources can be playing in the two zones at the same time. The Main Zone offers 7.1-channel playback of your audio/video gear in your main entertainment room. Zone 2 allows audio playback only of the same or different analog audio source connected to the receiver in another room of your home, via left/right RCA audio or speaker level outputs.

• Zone 2 Speaker Outputs: When using the VSX-1122-K to power speakers in a second room of your home, the main zone is restricted to 5.1-channels.
• Zone 2 Preamp Outputs: When using the receiver's preamp output terminals for the second room you need an additional amplifier to power those speakers, and the main zone of the receiver remains 7.1-channel.

Compatible Zone Sources: Only tuner, analog, USB/iPod, and Network/Internet Radio sources can be played in Zone 2. When a Network, Internet Radio, USB, or iPod/AirPlay source is selected in the main zone, it is only possible to select the same input source for the second zone. You cannot select different AM/FM radio stations or different Network content for different zones.

Incompatible Zone Sources: It is not possible to play the digital audio signals from the HDMI, Coaxial, or Optical terminals in Zone 2. Video cannot be sent to Zone 2.

Convenience Features

On-Screen GUI (Graphical User Interface): The VSX-1122-K features an advanced, full-color On-Screen GUI for use with the included remote, so you can make guided adjustments to your home theater sound. The On-Screen GUI is only visible when connecting the receiver to your television via HDMI.

AVNavigator: Pioneer's AVNavigator is an interactive owners manual that takes all the guesswork out of setting up the receiver. AVNavigator uses your networked PC to communicate directly with the VSX-1122-K, walking you through speaker set-up, MCACC room calibration, sound optimization, firmware updates and more. A CD-ROM is included to load the software onto your PC (Windows XP/Vista/7).

Input Name: You can choose to rename the input function for easier identification. Inputs can also be skipped.

Display Dimmer: You can dim or brighten the receiver's front-panel display. The brightness level can be controlled in four steps.

Sleep Timer: The receiver's Sleep Timer function can be set to 30, 60, or 90 minutes.

Auto Power Down: The power can be set to turn off automatically if no operation has been performed for a specific amount of time (15, 30, or 60 min.) with no audio or video signals being input to the receiver.

Remote/Bluetooth Control

Multibrand/Learning Remote Control: The supplied wireless remote is a multibrand/learning remote. The remote is pre-programmed to operate popular brands of equipment including Blu-ray/DVD players, Blu-ray/DVD recorders, CD players, TVs, and Satellite/Cable boxes. Also, the remote can learn specific commands from infrared remotes of other components. You can even program in Macros for a series of remote control commands from one button press.

HDMI Control: The Pioneer VSX-1122-K supports the HDMI Control function. With HDMI Control, you can synchronize operation between the Pioneer A/V receiver and your HDMI CEC-compatible TV or Blu-ray disc player (equipment must be connected via HDMI). HDMI Control Functions included:

• Synchronized Amp Mode: The receiver's volume can be set and the sound can be muted from the TV's remote control.
• Power Synchronization: The receiver and your connected TV will power On/Off at the same time.
• Automatic Switching Inputs: The receiver's input switches over automatically when the TV's input is changed or your Blu-ray player starts playback.

Note: Not all HDMI CEC-compatible components will be supported by this receiver.

IR Input/Output (3.5mm): If you keep your audio/video components in a closed cabinet or shelving unit, or you wish to use the sub zone remote control in another zone, you can use an optional IR receiver (such as a Niles or Xantech unit) to control your system instead of the remote sensor on the front-panel of this receiver. Simply connect the IR receiver to the IR input of this receiver and connect your component to the IR output jack of the receiver.

iControlAV2012 Remote App: The Pioneer free iControlAV2012 Remote App makes it easy to operate select functions of your Pioneer A/V receiver using select Apple iOS and Android devices in a WiFi network environment. Download this free remote app from the iTunes app store for your iPod touch, iPhone, or iPad (with iOS 4.3 or later); or download it from the Android Market for your compatible Android device (2.3.7 & up). The Pioneer iControlAV2012 Remote App lets you enjoy controlling your home cinema system with your smartphone or tablet device.

• Control Mode: The Control mode not only covers the basic functions of the AV Receiver (power, volume, input selection, and sound and video modes, balance and tone, etc) for the main zone; but also for additional zones as applicable - even internet radio and media server content navigation is integrated. And more, Basic functions such as Play, Stop, Forward, and Reverse are supported for your connected Pioneer Blu-ray Disc Player.
• Sound Explorer Mode: The Sound Explorer mode offers 18 Pioneer unique sound adjustment functions that can be operated and experienced from your compatible Apple iOS or Android device. You can directly jump to on-line video animations that concisely explain see the benefits of many of Pioneer original sound modes.
• Balance & Emphasis Modes: The Balance & Emphasis modes are virtual motion adaptive functions that allow you to change the "sweet-spot" of your home theater. You can independently adjust the volume of your center speaker or subwoofer just by tilting your Apple iOS or Android device. The Emphasis feature also features "Finger EQ" where you can adjust the sound equalization instantly with the touch of your finger.

Bluetooth Ready (optional): The Pioneer AS-BT200 Stereo Bluetooth Adapter (130ASBT200, sold separately) lets you wirelessly stream music from your Bluetooth enabled audio device to the Pioneer VSX-1122-K A/V receiver. Now, instead of being limited to headphones to listen to the music stored on your portable device or computer; you can enjoy your music wirelessly from your iPod touch, iPhone, iPad, BlackBerry, Android or other smartphone; as well as your PC, laptop, tablet, or many other A2DP profile Bluetooth-enabled devices directly from the Pioneer VSX-1122-K A/V receiver. The AS-BT200 connects to a proprietary port on the back of all the Pioneer A/V receiver.

Air Jam: Pioneer's exclusive Air Jam App has been designed in-house by Pioneer for select Apple and Android devices. With Air Jam, you and your friends can connect up to 4 Apple or Android devices to make a group playlist on your home theater system through the Pioneer VSX-1122-K, via Pioneer's AS-BT200 Stereo Bluetooth Adapter (sold separately).

Note: The Pioneer Air Jam app can be downloaded from iTunes and supports the iPod touch, iPhone, and iPad (requires iOS 4.2 or later). The Pioneer Air Jam app can also be downloaded from the Android Market and supports the Samsung Galaxy S2 (OS2.2), GalaxyS II (OS2.3).