Satellite Speakers
Powered Subwoofer
Satellite Speakers
Minx Satellite Speakers: The Cambridge Audio Minx S215 speaker system
includes five matching Cambridge Audio Minx MIN11 satellite speakers.
BMR (Balanced Mode Radiator) Technology: The Cambridge Audio
Minx MIN11 satellite speakers feature a single 2.25" BMR (Balanced Mode
Radiator) driver. The Cambridge Audio BMR drivers utilize patented "bending
wave" principles normally seen in advanced flat-panel speakers, combined with
piston-movement (backwards and forwards) like in a traditional speaker design.
This type of design provides the Minx satellite speakers with a much wider
frequency response and deeper and more powerful bass frequencies, plus
incredibly spacious sound. The BMR driver design also adds value by delivering a
much broader sound dispersion across the entire room, avoiding the typical
"sweet spot" pitfall, for a more enveloping sound. The 2.25" BMR (Balanced Mode
Radiator) drivers employ a rubber surround for added durability and excursion.
The BMR drivers also utilize ultra-compact push-pull neodymium magnets for
greater efficiency.
Compact Acoustic Suspension Enclosure: The Cambridge Audio
Minx MIN11 satellite speaker is only 3.0625" (w) x 3.0625" (h) x 3.75" (d). The
Minx MIN11 features an acoustic suspension (sealed) cabinet for greater detail
and tonal accuracy. The satellite speaker employs an acoustically damped
thermo-polymer and extruded aluminum cabinet to prevent distortion caused by
resonance and vibration. The Cambridge Audio Minx MIN11 includes a detachable
cloth grille. The Minx MIN11 cabinets are available in a high-gloss black (with
black cloth grille) or high-gloss white finish (with silver cloth grille). The
black and white high-gloss lacquers are finished to the highest standard using
paint application techniques developed by premium automotive manufactures. The
black and white lacquer finishes are hard to scratch and easy to clean.
Binding Posts: The Cambridge Audio Minx MIN11 satellite
speaker is equipped with a pair of binding post terminals. The binding post
terminals will accept bare-wire, pin-connectors, and spade-connectors. The
terminals are color-coded (black/red) to distinguish between positive and
negative. The satellite speaker's binding post terminals can be removed to allow
use of banana plugs (single only). The binding post terminals simply pull out of
the back of the speaker, which allows access to banana connector inputs.
Mounting Options: The Cambridge Audio Minx MIN11 satellite speakers
can be table-top mounted, wall mounted, or placed on a floor-standing speaker
stand.
- Table-Top Mount: The Minx MIN11 satellite speakers come
with four self-adhesive rubber feet (each) to simply place the speakers
securely on a table or shelf. There is also an optional Minx Table-Top Stand
(779MTSA, sold separately) available, which allows placement on a desk,
table, or shelf.
- Wall Mount: The Minx MIN11s features a rear-mounted 6mm
threaded insert which allows you to wall-mount the speakers using the
included keyhole-slot adapter, the Cambridge Audio Minx Wall Bracket (779MPWM,
sold separately), or other optional wall-mount bracket (sold separately).
- Speaker Stand: The 6mm threaded inserts on the back of
the satellite speakers can be used to attach the speakers to the Cambridge
Audio Minx Floor Stands (779MFSB, sold separately).
Frequency Response: The Cambridge Audio Minx MIN11 satellite
speaker features a 120Hz to 20,000Hz frequency range.
Power Handling: The Cambridge Audio Minx MIN11 satellite
speaker can handle 15 to 50 watts (RMS).
Powered Subwoofer
Minx X200 Powered Subwoofer: The Cambridge Audio Minx S215
speaker system includes the Cambridge Audio Minx X200 powered subwoofer.
Digital Signal Processor (DSP): The Cambridge Audio X200 powered
subwoofer features built-in Digital Signal Processing (DSP) which allows for
smaller cabinet construction without sacrificing bass response.
200W Amplifier: The Cambridge Audio X200 powered subwoofer is equipped
with a 200 watt (RMS) digital amplifier for increased efficiency and
reliability.
6.5" Woofer: The Cambridge Audio X200 powered subwoofer uses a
one-piece, aerospace-grade aluminum, front-firing 6.5" cone woofer to move air with incredible
efficiency.
Auxiliary Bass Radiator (ABR): The Cambridge Audio X200 powered
subwoofer utilizes two side-firing 6.5" auxiliary bass radiators (ABR) for greater bass response
and better efficiency. The ABR design replaces the need for bass ports to eliminate air noise
at higher volume levels.
Frequency Response: The
Cambridge Audio X200 powered subwoofer has a rated frequency response of 39-200
Hz.
Controls: The Cambridge Audio X200 powered subwoofer is equipped with
the following rear-panel controls.
- Volume Control: The Cambridge Audio X200 powered subwoofer
has a rear-panel rotary volume control to adjust the volume of the subwoofer
relative to the other speakers in the system.
- Crossover Frequency: The Cambridge Audio X200 powered subwoofer offers
a continuously variable low-pass filter, adjustable from 50-200 Hz.
- Phase Adjustment: The subwoofer's phase adjustment allows you to
adjust the subwoofer's phase between 0° to
180°. If the bass sounds muddy or unclear,
adjusting the phase control can sometimes strengthen the bass performance.
- Auto On/Off: The X200's Auto On/Off feature will switch the powered
subwoofer On and Off automatically by signal detection.
Connections: The Cambridge Audio X200 powered subwoofer is equipped
with the following rear-panel connections.
- RCA Input: The powered subwoofer has gold plated left & right RCA
line-level inputs for use with receivers having a subwoofer or stereo preamp
output that do not contain their own low-pass crossover. The left channel RCA
input doubles as the LFE input, if your receiver has an LFE output and a
built-in low-pass crossover.
- RCA Output: The powered subwoofer's gold-plated left & right RCA
line-level outputs allow you to connect (daisy-chain) a second powered
subwoofer.
- Wireless Port: This proprietary 5-pin port is designed to connect the
Cambridge Audio Wireless Module (not yet available).
High-Gloss Finish: The Cambridge Audio X200 powered
subwoofer is available in a high-gloss black (with black cloth grille) or
high-gloss white finish (with silver cloth grille). The black and white
high-gloss lacquers are finished to the highest standard using paint application
techniques developed by premium automotive manufactures. The black and white
lacquer finishes are hard to scratch and easy to clean.
