Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Features
Overview: The Channel Master Titan 2 Model CM-7778 Mast
Mounted Antenna
Preamplifier provides amplification for HD and digital signals received by your antenna. Preamplifiers can also be
used when distributing the antenna signal to multiple TVs, as splitters reduce
the signal strength at each output. The preamplifier comes with an indoor power
supply, which connects via coaxial cable.
Signal Gain: The CM-7778 is a medium gain, low noise
preamplifier to be used in moderate signal areas to boost the antenna signal to a
viewable strength. The preamplifier provides 16 dB of signal gain on both VHF
and UHF bands, at frequencies between 54 MHz and 1000 MHz.
Note: For areas with weak signal strength, the
CM-7777 High Gain Preamplifier is recommended.
Switchable FM Trap: The amplifier has an FM trap to block FM
signals to prevent them from interfering with the TV signal. If you wish to
unblock the FM signals, you will need to remove the cover, held in place by 4
Phillips-head screws, and set the switch to "Out".
Case: The CM-7778 features a rugged, outdoor-rated housing
that can withstand temperatures up to 140°F. The preamplifier mounts to the
antenna mast with the supplied U-bolt assembly just below the antenna. The unit
mounts with the connections facing downward to keep moisture out of the housing
and the connections dry.
Note: The preamplifier and supplied U-bolt assembly are designed for use
with antenna masts up to 1-3/4" in diameter.
Connections: The CM-7778 has two F-type 75-ohm connections
at the preamplifier: a combined VHF/UHF input, and an output/power connection.
The indoor power supply (AC adapter) connects via coaxial cable, and includes a
power inserter to energize the mast-mounted amplifier along the cable.
Dimensions (Preamplifier):
- Width: 4.904"
- Height: 2.54"
(without cables connected)
- Depth: 3.733"
