Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features

Woofers: The woofer cones are made of Mica Reinforced Cellular Fiber (MRC). MRC is very light and extraordinarily rigid, producing exceptional musical transients that are clear with little distortion compared to traditional cone materials.

Tweeters: The tweeters are 1" aluminum domes offering outstanding dispersion and clarity. They can be flush mounted, surface mounted using the angled brackets, or surface mounted using the flat brackets.

Tweeter Mounting Dimensions:

Note: With any of the mounting brackets the threaded mounting posts can be used to hold the tweeters in place, this adds to the required depth (approximately 1-3/8" for flush mounting and 1/4" for surface mounting).

Crossovers: Each crossover has high-pass and low-pass outputs with a 5 kHz crossover point and 12 dB/octave slope. A jumper inside each crossover allow you to set the tweeter output level according to your system requirements and personal preference; choose 0 dB (factory setting) or -3dB. The inputs and outputs are screw terminals; they will accommodate bare wire or spade connectors up to 0.315" wide. There are two mounting holes in the base of each crossover.

Bi-amp Inputs: The 2-way crossover has separate inputs for the woofer and tweeter; this lets you drive the system with dedicated power for the separate speaker elements, instead of sharing power. The input jumper wires are factory installed to short the tweeter and woofer inputs; the jumper wires must be removed and separate input wires used to bi-amp the speakers.

Crossover Dimensions:

• Length: 4.647"
• Width: 3.287"
• Height: 1.277"

Mounting: The woofers can be mounted in a variety of 6-1/2" and 6-3/4" applications;