About the Alpine MRP-F450
Outstanding audio performance — you expect it when the amp is an Alpine. Alpine's V-Power amplifiers supply the high level of performance you want without shaking loose too much of your hard-earned cash.
The versatile MRP-F450 4-channel amplifier can take on a variety of roles in your system. Drive your front and rear speakers in 4-channel mode, or switch to 2-channel mode to bridge the output and get a pair of subs thumping with 200 watts of power each. Want the best of both worlds? Use channels 1 and 2 to power full-range speakers, and bridge channels 3 and 4 to power a sub. Any way you use it, this amp will impress you with its strong sonic performance.
Variable high-pass/low-pass filters let you adjust the frequency output for either full-range speakers or a sub. If you're driving a subwoofer and using the low-pass crossover, a subsonic filter eliminates inaudible, ultra-low bass notes for cleaner output.
The amp's rugged construction ensures reliable performance. A heavy machined-metal heatsink keeps the internal parts cool and distortion low. Gold-plated screw terminals resist corrosion that can degrade signal performance.
Product highlights:
- 4-channel car amplifier
- 70 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms)
- 200 watts RMS x 2 bridged output at 4 ohms (4-ohm stable in bridged mode)
- 2-, 3-, or 4-channel output
- variable high-pass/low-pass filters (50-400 Hz, 12 dB/octave)
- tuned Bass EQ (12 dB bass boost at 50 Hz for channels 3 & 4)
- subsonic filter (15 Hz, 24 dB/octave for channels 3 & 4)
- MOSFET power supply
- CEA-2006 compliant
- STAR Topology (minimizes internal noise and prevents ground interference)
- speaker- and preamp-level inputs
- preamp outputs
- gold-plated screw terminals
- fuse rating: 25A x 2
- 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
- 13-1/4"W x 2-3/8"H x 9-9/16"D
- warranty: 1 year
- MFR # MRP-F450
What's in the box:
Alpine MRP-F450 owner's manual
- 4-Channel amplifier
- 8" Speaker-level input harness (with 8-pin Molex plug on one end and bare wire on the other end)
- 2 Terminal covers
- 4 Self-tapping hex-head screws (M4 x 20)
- 4 Machine screws for securing terminal covers (M3)
- Owner's Manual (English/French/Spanish)
- Customer Care Registration card
Customer reviews for Alpine MRP-F450
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Alpine MRP-F450
Features & specs
| Performance | ||
|---|---|---|
| RMS Power Output (Watts x Channels) |
70 x 4 | |
| Peak Power Output (Watts x Channels) | --- | |
| Power at 2 Ohms (Watts x Channels) | 100 x 4 | |
| Power at 1 Ohm (Watts x Channels) | --- | |
| Bridged Power (Watts x Channels) | 200 x 2 | |
| Minimum Impedance Bridged | 4 | |
| Minimum Impedance Unbridged | --- | |
| Minimum Impedance | --- | |
| Best Frequency Response | 10-50k Hz | |
| THD at Rated RMS Power | 1% | |
| Signal to Noise Ratio | 100 dB | |
| Input Voltage | 14.4v | |
| Features | ||
| Amplifier Class | AB | |
| Low-Pass Crossover Frequency | 50-400 Hz | |
| Low-Pass Slope (dB/octave) | 12 dB | |
| High-Pass Crossover Frequency | 50-400 Hz | |
| High-Pass Slope (dB/octave) | 12 dB | |
| Bass Boost | 12db | |
| Bass Boost Frequency | 50 Hz | |
| Fan Cooled | No | |
| Fuse Rating | 25 x 2 | |
| Speaker Level Inputs | --- | |
| Preamp Outputs | 1 pair | |
| Width (inches) | 13-1/4 | |
| Height (inches) | 2-3/8 | |
| Depth (inches) | 9-9/16 | |
| Parts Warranty | 1 Year | |
| Labor Warranty | 1 Year | |
Product Research
Power Supply: The MRP-F450 amplifier's power supply uses MOSFETs to convert DC battery voltage to the higher DC voltages needed for high power. It supplies positive and negative voltages around 0V, rather than around 6V as with conventional single-polarity power supplies. The result is higher power levels and a dynamic range wider by as much as 10dB.
Gain Controls: This amp has independent front and rear channel gain controls.
Crossovers: Both front and rear channels have independently selectable high-pass and low-pass variable 50-400 Hz crossovers with a slope of 12dB/octave.
Subsonic Filter: This amp utilizes a 15Hz subsonic filter to eliminate super low frequencies that can rob power and damage speakers. The subsonic filter operates only for the rear channels, and is engaged when the rear channel crossover is set to "low-pass" operation.
Bass EQ: The Bass EQ circuit provides a fixed boost of 12dB at 50 Hz for the rear channels only. The Bass EQ does not function when the amp's rear-channel crossover is set to "high-pass" operation.
Inputs: The amplifier offers both line-level and speaker-level inputs for 4 channels. The supplied speaker-level input harness allows you to connect this amplifier to a receiver without preamp outputs, either aftermarket or factory.
Line Outputs: This amplifier has a pair of non-fading stereo RCA line outputs. You can use these outputs to daisy-chain another amplifier without having to run additional signal cables from the receiver.
Terminal Cover: The amp comes with two plastic covers that protect and insulates the RCA, power, and speaker connections. Four supplied machine screws attach the cover to the amplifier.
Left Side Of Amplifier:
- GND (ground): Gold-plated terminal strip, 0.35" wide
- Battery: Gold-plated terminal strip, 0.35" wide
- Remote: Gold-plated terminal strip, 0.35" wide
- Speaker Outputs: Gold-plated terminal strips for 4 speakers, 0.35" wide
Right Side Of Amplifier:
- Line Inputs: 2 pairs of gold-plated stereo RCA jacks
- Line Outputs: 1 pair of gold-plated stereo RCA jacks
- Speaker Level Input: Molex plug input for supplied 8-pin harness
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Awesome amp!!! Hits both highs and lows very cleanly. Im running 4 MB Quart 6X9s and I think the wattage rating at 70 watts RMS is a little low. This amp makes those puppies MOVE!! For about $300 this amp very much worth it.
Lee from UT