Marine Rated
Built-in Bluetooth
AM/FM+Pandora+SiriusXM Radio
Disc & USB Playback
iPod/Aux Integration
Audio Section
Display Features
Remote Control
Marine Rated
Marine Tested: The Clarion M303 Marine CD receiver has
been engineered and tested for use in the harsh marine environment. The M303
meets ASTM B117 and ASTM D4329 guidelines ensuring the receiver's resistant to
salt, fog and UV exposure. The receiver features a drip shield chassis to keep
water from dripping onto the unit's internal circuits. In addition, the
head unit's PCB and microprocessor are conformal coated to protect them from
corrosion.
Water Resistant Covers (optional): Even though the conformal
coating makes the receiver water-resistant, it is still recommended that it be
used with a universal marine cover such as the Metra (120999005B,
sold separately) or Scosche (142ACM1,
sold separately).
Built-in Bluetooth
Bluetooth Technology (powered by Parrot): The Clarion M303
is equipped with built-in Bluetooth ver. 2.0+EDR (powered by Parrot), allowing
you to make and receive phone calls wirelessly through the receiver; as well as
stream music wirelessly from your smartphone to the head unit. In order to use
Bluetooth wireless technology, your phone must also be Bluetooth compatible and
be able to interpret certain profiles. This unit is compatible with the
following Bluetooth Profiles:
- Hands-Free Communication: HFP (Hands Free Profile),
PBAB (Phone Book Access Profile).
- Audio Streaming: A2DP (Advanced Audio Distribution
Profile), AVRCP (Audio/Video Remote Control Profile).
Note: The Clarion M303 may not be compatible with all
Bluetooth enabled phones or audio players. Visit
Clarion Bluetooth Support for complete list of compatible phones and
players.
Pairing: Before using your Bluetooth enabled device, it must
be paired to the M303. You can register up to five Bluetooth enabled cell-phones
with the Clarion marine head unit (only one paired phone can be used at a time).
The Clarion M303 can be paired with most Bluetooth enabled mobile phones,
including the Apple iPhone and most Android Smartphones.
Hands-Free Communication (w/ Integrated Microphone): The M303 supports Bluetooth
hands-free communication from your Bluetooth enabled mobile phone. The
M303 can be set to automatically answer your incoming calls and mute any music
audio to your vehicle's speakers so you can instantly carry on a phone
conversation hands-free. An integrated front-panel microphone carries on your side of the
conversation while your car's speakers are used to hear the other person. You
can make a call by entering the phone number, selecting a contact from your
Phonebook list, or using the Call History Log of received/dialed/missed calls.
- Answering A Call: During an incoming call, the caller's
phone number will be seen on the unit's LCD and a ring-tone will be heard
through your car stereo speakers. You can then manually answer the incoming
call from the head unit's front-panel controls. You can also set the unit to
automatically answer an incoming call within 5 seconds.
- Making A Call: You can make a call using the Clarion
marine head unit's front-panel controls.
- Direct Dial: Outgoing calls can be made be entering
telephone numbers (0-9, *, #, +) directly via the car stereo's rotary
control knob.
- Phonebook: You can search for contact names in your
mobile phone's phonebook from the Clarion M303 and then make your call.
The head unit can store up to 500 contact numbers.
- Call Log: You can also make a call by searching
your mobile phone's call history (Received/Dialed/Missed) from the
Clarion M303.
- Redial: You can simply redial the last number
dialed with a press of a single button on the marine head unit.
Optional External Microphone: The Clarion RCB-199 (020RCB199,
sold separately) is an external microphone which can be connected to Clarion
M303. The RCB-199 external microphone provides better performance in noisy
environments than the integrated microphone found on the front-panel of the head
unit. The microphone features an attached 13.25' cord terminated by a
right-angle male 3.5mm connector which plugs into the microphone input on the
rear-chassis of your compatible Clarion head unit. The microphone also features
an integrated sun-visor clip for mounting the external microphone in your
vehicle. The integrated bracket allows the microphone to swivel left-to-right
and rotate up-or-down.
Wireless Audio Streaming (w/ metadata): The Clarion M303
also supports wireless audio playback (AD2P) and control (AVRCP) of a Bluetooth
enabled audio player or smartphone. The M303 will be able to control your stored
music's basic playback functions; such as Play/Pause, Previous/Next Track, and
Fast-Forward/Reverse. The M303 also supports audio streaming of music apps from
your smartphone with basic control and metadata display. When an
incoming call or outgoing call is in progress from your Bluetooth enabled mobile
phone, audio streaming will be paused so you can take your call. Once the call
is finished, your streaming music will resume.
AM/FM+Pandora+SiriusXM Radio
AM/FM Tuner: The Clarion M303 is equipped with a built-in
AM/FM tuner offering manual, seek, & preset tuning. 18 FM station presets and 6 AM station
presets can stored. Stations can be stored manually or automatically. Preset scan receives the stations stored
in the unit's preset memory in order. This function is useful when searching
for a desired preset station. You can also store one radio
station in Instant Station Recall (ISR) memory and recall it from any mode
(except Power Off). Once the ISR station has been recalled, you cannot tune
to another station without first disengaging the ISR function. You can,
however, switch to another source. When Local seeking is turned "On", only
those radio stations with strong radio signal can be received.
Pandora App: The Pandora App (free) lets you play music from
the Pandora music service through the Clarion M303 using your connected Apple
iPhone, via the USB/Dock cable supplied with your iPhone. The Clarion M303
provides control over the Pandora music service and displays Artist, Album, and
Song information. You can select Pandora stations from your station list and
sort them by date or alphabetically (A-Z). Or, you can create a new station from
the current playing artist or song. You can also skip song tracks within a
station. You can even give songs a thumbs up or thumbs down. To access Pandora
you must have an Apple iPhone (iOS3 or later) with the latest version of the
Pandora application from Apple's iTunes App Store. Your iPhone will need an
active Data Plan account with connection to the Internet via 3G, EDGE, or WiFi.
You will also need a Pandora music service account.
Note: Access to the Pandora service will depend on the
availability of a cellular and/or WiFi network for purposes of allowing your
iPhone to connect to the Internet. Pandora is not supported in Canada and
only available in the United States.
SiriusXM Ready: The Clarion M303 comes ready for SiriusXM
programming with access to XM & Sirius Satellite Radio stations. Thanks to its
proprietary SiriusXM Connect port, you can add the optional
SXV200V1 SiriusXM Connect tuner and receive more than 150 channels of
exclusive programming directly from SiriusXM, via the "SiriusXM
All Access" package (subscription required). Visit
SiriusXM.com
for a complete list of subscription options & channel guide. Additional features
of the SXV200 SiriusXM Connect tuner include:
- Information such as Channel Name, Artist Name, & Song Title can be
viewed on the head unit's display
- Category Search feature lets you search for channels within a certain
genre or category
- Up to 18 SiriusXM Satellite Radio station presets
- Artist/Song Alert notifies you when your favorite artist or song is
playing
- Replay feature lets you pause, fast-forward, or rewind up to 60 minutes
of live content
- iTunes Tagging for your connected iPod or iPhone
- Channels containing content unsuitable for children can be blocked
Note: SiriusXM Satellite Radio operates on the XM
Network. However, you can easily add this SiriusXM tuner to an existing
Sirius or XM account for a Multi-Radio Discount Plan.
Disc & USB Playback
Disc Compatibility: The unit features a single disc player
that will playback CD-Audio, CD-Text, and finalized CD-R/CD-RW audio discs. The
unit also supports playback of MP3/WMA music files loaded onto CD-R/RW discs.
Rear-Panel USB Port: The Clarion M303 features a rear-panel
USB port (connected by a 41" cable) for connection and control of a portable USB
mass-storage class (MSC) device; such as your Android smartphone, portable
digital audio player, or USB thumbdrive. The USB port enables audio playback and
control of MP3/WMA audio files stored on portable USB mass-storage class
devices. USB portable audio devices that can be charged via USB will be charged
when plugged into the CD receiver's USB port (max. 0.5A), and the vehicle's ignition
switch is set to ACC or On. The Clarion USB extension cable (020CCA755,
sold separately) can be used to connected your USB flash-memory device.
MP3/WMA Playback: The Clarion M303 supports the following
types of MP3/WMA files recorded onto CD-R/RW disc or loaded onto a USB mass
storage class device.
|
Media Type |
CD-R/RW |
USB Storage Device |
|
File System |
ISO9660
Level 1/2, or Joliet |
FAT
12/16/32 |
|
Playable File Types |
MP3:
bit rate of 8-320 kbps w/ sampling rate of 8-48kHz
WMA: bit rate of 8-320 kbps w/ sampling rate of
8-48kHz |
|
Maximum # of Folders/Files |
3,000
files/999 files per folder |
|
Tags |
ID3 tag
(version 1.0/1.1/2.2/2.3/2.4), WMA tag |
Disc-In-Play-Function: This feature allows you to turn the
power to the unit "on" and start playing the disc automatically when the disc is
inserted even if the unit is not powered up, as long as the ignition key is
turned to the "on" or "acc" position.
Top Function: The Top Function resets the CD receiver to the
first track of the inserted disc or connected USB device.
Folder Select: This function allows you to select a folder
containing MP3/WMA files and start playing from the first track in the folder.
Playback Functions: The M303 provides Repeat, Random, & Scan
playback functions.
- Scan Play: This function allows you to locate and play
the first 10 seconds of all the tracks recorded on an inserted disc or
connected USB device.
- Repeat Play: This function lets you play the current
track repeatedly or play a track currently being played in a MP3/WMA folder
repeatedly.
- Random Play: This function allows you to play all
tracks recorded on a disc or USB device in a random order.
Last Position Memory: If you turn off the unit while a disc
is playing, it will resume playback at the stopping point when it is turned on
again.
Auto Reload: When a CD is ejected and left sticking out of the CD slot for 15 seconds, the
unit automatically reloads the CD to protect if from damage.
Mounting: For proper CD playback you must install the unit within 30-degrees of
horizontal.
iPod/Aux Integration
iPod Direct Connection: The Clarion' M303's rear-panel USB
port also acts as an iPod/iPhone high-speed direct connection when used with the
USB/iPod cable that came with your iPod/iPhone. An additional iPod cable is
available (469USBPOD,
sold separately) so you can leave one at home and one in the car. f you have an
iPod nano (7th gen), iPod touch (5th gen), or iPhone 5; use the Lightning-to-USB
cable that came with your Apple device to connect to the head unit. Using either
cable allows audio playback, music navigation, information display, and charging
of select iPod/iPhone models from the Clarion marine head unit.
- iPod DAC Bypass: The USB connection allows your
iPod/iPhone's stored music to be loaded instantly to the head unit and sound
quality to be maximized through the head unit's 1-bit D/A converter, allowing
for a Signal to Noise ratio up to 83dB.
- iPod Control: You can choose to control the iPod/iPhone from
the head unit or from your iPod/iPhone's clickwheel or touchscreen.
- Head Unit: The Clarion head unit allows you to navigate
your iPod's music by Playlist, Artists, Album, Genre, Composer, Song, or
Podcast. You can search these categories alphabetically (A-Z). The head unit
also supports Repeat (file/all) playback functions of your connected
iPod/iPhone.
- Simple Control: In Simple Control mode, you can
navigate the stored music on your iPod/iPhone from its clickwheel or
touchscreen. You can also listen to your favorite music apps (such as
iHeartRadio,
SiriusXM,
Last.fm,
Rhapsody, &
Slacker)
from your iPhone (iOS 3.0+) through the Clarion head unit
and your vehicle's speakers. You will continue to use your iPhone's
touchscreen to navigate your apps. Not all apps will be compatible with App
Mode. Access to your iPhone's downloaded applications
will depend on the availability of a cellular and/or WiFi network for
purposes of allowing your iPhone to connect to the Internet.
- Information Display: The head unit will display your
iPod/iPhone's stored music file information; including Track number, Elapsed
playing time, Song title, and Artist/Artist name. The head unit will also
display song/artist information from the Pandora App. It will not display
metadata from other streamed apps or when in Simple Control mode.
- iPod Charging: The head unit's USB connection provides 0.5A
of current to power and charge your connected iPod/iPhone when your vehicle's
ignition switch is set to the 'ACC' or 'On' position. This unit does not charge
the iPad. If your iPod/iPhone has no initial battery charge, then the unit will
not recognize it.
Note: iPod Video can be viewed by connecting the M303 to an
external universal monitor with RCA video input and connecting a compatible
iPod/iPhone via the optional Clarion CCA750
cable (020CCA750,
sold separately).
iPod/iPhone Compatibility Chart: The Clarion M303 is "Made
for iPod/iPhone" compatible and supports the following iPod/iPhone model
features (as of 3/19/2013):
|
Apple Device |
Generation |
Tested Version |
Media Type |
Control Type |
Display Type |
Bluetooth |
Charge |
|
Audio |
Video |
Head Unit |
iPod/App |
Pandora app |
Artist/Song Text |
Track Info |
Phone |
Audio |
|
iPhone |
2G |
3.1.3 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
Y |
N |
Y |
|
3G |
4.2.1 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
|
3GS |
5.1.1 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
|
4 |
6.1.2 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
|
4S |
6.1.2 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
|
5 |
6.1.2 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
|
touch |
1st |
2.2.1 |
Y |
N |
Y |
Y |
N |
Y |
Y |
N |
N |
Y |
|
2nd |
4.2.1 |
Y |
N |
Y |
Y |
N |
Y |
Y |
N |
Y |
Y |
|
3rd |
5.1.1 |
Y |
N |
Y |
Y |
N |
Y |
Y |
N |
Y |
Y |
|
4th |
6.1.2 |
Y |
N |
Y |
Y |
N |
Y |
Y |
N |
Y |
Y |
|
5th |
6.1.2 |
Y |
N |
Y |
Y |
N |
Y |
Y |
N |
Y |
Y |
|
nano |
1st |
1.3.1 |
Y |
N |
Y |
N |
N |
Y |
Y |
N |
N |
Y |
|
2nd |
1.1.3 |
Y |
N |
Y |
Y |
N |
Y |
Y |
N |
N |
Y |
|
3rd |
1.1.3 |
Y |
N |
Y |
Y |
N |
Y |
Y |
N |
N |
Y |
|
4th |
1.0.4 |
Y |
N |
Y |
Y |
N |
Y |
Y |
N |
N |
Y |
|
5th |
1.0.2 |
Y |
N |
Y |
Y |
N |
Y |
Y |
N |
N |
Y |
|
6th |
1.2 PC |
Y |
N |
Y |
Y |
N |
Y |
Y |
N |
N |
Y |
|
7th |
1.02 PC |
Y |
N |
Y |
Y |
N |
Y |
Y |
N |
Y |
Y |
|
classic |
80GB |
1.1.2 |
Y |
N |
Y |
Y |
N |
Y |
Y |
N |
N |
Y |
|
120GB |
2.0.1 |
Y |
N |
Y |
Y |
N |
Y |
Y |
N |
N |
Y |
|
160GB |
2.0.4 |
Y |
N |
Y |
Y |
N |
Y |
Y |
N |
N |
Y |
|
video |
5th |
1.3 |
Y |
N |
Y |
N |
N |
Y |
Y |
N |
N |
Y |
|
iPad |
1 |
5.1.1 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
N |
Y |
N |
|
2 |
6.1.2 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
N |
Y |
N |
|
3 |
6.1.2 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
N |
Y |
N |
|
4 |
6.1.2 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
N |
Y |
N |
|
mini |
6.1.2 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
N |
Y |
N |
Note: Apple iPod/iPhone software updates may change
functionality results. If you download a newer software version, you may
need to reset the head unit and your iPod/iPhone to regain functionality. If
this doesn't work, you may need to wait until a newer software update is
available.
Auxiliary Input: The M303 features a rear-panel stereo
Auxiliary input, so you connect your external portable audio player or portable
satellite radio receiver to this head unit. You can set the Auxiliary input
sensitivity level to Low, Mid, or High to match the volume output of your
connected external audio device.
Audio Section
MOSFET Amplifier: The Clarion M303 employs a MOSFET (Metal
Oxide Semiconductor Field Effect Transistor) power amplifier capable of
delivering 45W (Peak) x 4ch of high quality sound with superior linearity & less
distortion than conventional power amps, even with the volume cranked up.
CEA2006 Compliant: The power specifications for the M303 are
compliant with the CEA2006 Mobile Amplifier Power Testing and Measurement
standards from the Consumer Electronics Association (CEA). These standards were
developed as a way to equitably compare power specs from model to model and
between manufacturers. The power output specs for the M303 are as follows:
- CEA2006 Specs: 19 watts RMS x 4 channels (at 4 ohms,
20Hz-20kHz, 1% THD-N)
- Maximum Power Output: 45 watts x 4 channels (180 watts
total)
BeatEQ: BeatEQ lets you tune the sound to your liking,
depending on the category of music, for a more fulfilling listening experience.
The Clarion CD receiver provides 4 preset EQ curves (Bass Boost, Impact, Excite,
Off) and 1 custom EQ curve. Bass Boost emphasizes the bass portion of your
music; Impact emphasizes the bass & treble portions of your music; Excite
emphasizes bass, midrange & treble portions of your music; while Flat sets the
bass, midrange, & treble to 0. The Custom EQ lets you freely customize the
frequency, Q-factor, and level of the bass, midrange, & treble.
| BeatEQ
(Custom Mode) |
Frequency |
Q-Factor |
Level |
| Bass |
50Hz, 100Hz, 200Hz |
0.7, 1, 1.4, 2.0 |
-7 to + 7 dB |
| Midrange |
500Hz, 1kHz, 2kHz |
| Treble |
5kHz, 10kHz, 15kHz |
Note: BeatEQ settings are applied to all sources.
Magna Bass EX (Extend): The Magna Bass Extend feature does
not adjust the low frequencies like the normal sound adjustment function, but
emphasizes the deep bass frequencies to provide you with a dynamic sound. This
circuit boosts bass at an ultra-low frequency of about 50Hz, creating a rich,
deep, defined bass rather than the muddy, booming bass of a standard loudness
control. What is more, boost levels are dependent on the system volume,
resulting in balanced system response and dynamic bass reproduction.
4ch/2V Preamp Output: The Clarion M303 features 4ch/2V RCA
line level outputs (Front/Rear). The unit's rear preamp outputs can be
configured as a dedicated non-fading RCA subwoofer output with a low-pass filter
and level control (+/-6).
Built-in Crossovers: The Clarion M303 is equipped with
built-in low-pass and high-pass crossovers.
- Low-Pass Subwoofer Filter: The Low-Pass Filter (LPF)
for the subwoofer preamp output will send only the low frequency range
through the preamp outputs to ensure superb performance with a connected
subwoofer. The low-pass filter can be set to 60Hz, 90Hz, 120Hz, or Through
(full-range).
- High-Pass Filter: The M303 features a High-Pass Filter
(HPF) for the unit's front & rear channels, via speaker-output or
preamp-output. You can adjust the high-pass filter from 60Hz, 90Hz, 120Hz,
or Through (full-range). The HPF prevents low bass notes from distorting
your front & rear speakers. The high-pass filter setting effects both the
front & rear channels of the head unit.
Beep: The marine head unit provides an audible beep to
confirm button operation. This function can be turned On or Off.
Display Features
Ergonomic Face Design: The Clarion M303 features an
easy-to-use rotary volume control and easy-to-read illuminated buttons on the
face which are laid out in an asymmetrical design to place the most used
features within a specific area for ease of use and less user distraction.
Digital LCD: The single-line digital LCD,
with white background and black characters, on the M303 allows numbers and characters to
be displayed clearly in all lighting conditions.
Illumination Dimmer: The
receiver's display automatically dims to a preset brightness when the vehicle's
headlights are turned on. The wiring harness includes an orange/white lead that
should be connected to the vehicle's parking light circuit in order for the
dimmer feature to operate.
Screen Saver: This unit is provided with a Screen Saver function which
allows you to show various kinds of patterns and characters in the operation
status indication area of the display in a random order. You can turn this
function on or off. If the button operation is performed with the screen saver
function on, the operation display corresponding to the button operation is
shown for about 30 seconds and the display returns to the screen saver display.
Detachable Face Security: This unit features Detachable Face
Security. A face-case is included to protect the unit's faceplate when detached.
A face-fixing screw is supplied for making the face non-detachable, if
desired. An optional soft face case (142DFC1X,
sold separately) can also be purchased for this unit
Remote Control
Optional Remote Control: The unit is equipped with a rear
mounted DIN connector to accommodate an optional Clarion wired marine remote
control (020MW1/020MW4; sold
separately). You can also choose to add on the Clarion MF marine RF remote
control (020MF1,
sold separately). When the wired remote and RF remote are used in combination
with one another, a Y-adapter is required (020MWRYC,
sold separately).
