Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Compatibility: The AX-ADFD02 must be used with the Axxess AX-ADBOX1 or AX-ADBOX2 Auto-Detect System Interface
(sold separately) when replacing your factory radio with an aftermarket stereo
in a Ford Explorer (2012-up), Fiesta (2011-up), or Focus (2012-up); as of
Note: Your aftermarket head unit must be equipped with a
rear-panel AUX input. Please consult Crutchfield's
Vehicle Selector to see if your vehicle is compatible.
Ford SYNC Retention: In conjunction with the Axxess
Auto-Detect System Interface (sold separately), the AX-ADFD02 helps to retain
all functions of the Ford SYNC system; including Voice Recognition Music Search,
USB, iPod, Auxiliary Input, Bluetooth Phone & Audio Streaming, Turn-by-Turn
Navigation, 911 Assist, and Vehicle Health Report.
Factory Amplified/Non-Amplified Compatible: The Axxess
AX-ADFD02 can be used in vehicles with or without factory amplifiers, including
digital amplified systems found in Ford vehicles (such as Sony/THX). Both
balance & fade control are retained when used with AX-ADBOX1 interface (sold
separately). The AX-ADBOX2 interface (sold separately) does not retain fader in
vehicle's with factory digital amplifier.
R.A.P (Retained Accessory Power): The ignition power source
of many vehicles keeps the radio on until one of the doors is opened. This
feature is called the R.A.P. (retained accessory power). The AX-ADFD02, along
with the Axxess Auto-Detect System Interface (sold separately) is designed to
retain this feature.
Optional Steering Wheel Control Interface: The AX-ADFD02
features a right-angle 3.5mm connector that lets you keep your vehicle's OEM
steering wheel controls via the optional Axxess Steering Wheel Control Interface
22-/12-Pin to 24-/16-Pin Harness: The AX-ADFD02 Ford harness
is fitted with a 22-pin connector which plugs into the Axxess Auto-Detect System
Interface (sold separately), a 12-pin connector that plugs into the Axxess
Steering Wheel Control Interface (sold separately), a 24-pin connector and
16-pin connector which plugs into your Ford vehicle's factory radio harness.
There is also as set of RCA cables that will need to be connected to the
rear-panel AUX input of your aftermarket head unit. In addition, 8
bare wire leads will need to be hardwired to your vehicle's wiring and
aftermarket radio harness.
||Right Rear Speaker +
||Right Rear Speaker -
||Left Rear Speaker +
||Left Rear Speaker -
Note: In addition, the Axxess Auto-Detect System Interface
(sold separately) includes a 16-pin harness which connects between the
interface module and your aftermarket receiver. These connections will need
to be crimped or soldered together.