Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Vehicle-Specific Custom Enclosure: This MTX ThunderForm
enclosure is specifically designed to fit select 2005-2012 Ford Mustang coupes
(it's not compatible with the convertibles). Please refer to the Crutchfield
Car Selector to confirm fit for your vehicle.
Enclosure: The ThunderForm enclosure is made of molded
high-density polyethylene resin, which dampens resonance and is rigid enough
to resist flexing. It is an acoustic suspension (sealed) chamber.
Mounting Location: This enclosure is designed to mount in
the trunk, on the passenger's side.
Note: The provided dimensions are taken at the widest points of
the enclosure. Keep in mind that these enclosures are custom made to fit in this
particular vehicle, so the enclosure will fit properly in only one specific location.
Thunder4500 Subwoofer: This enclosure comes loaded
with one 12" MTX Thunder4500 subwoofer. The woofer has an unusual impedance,
specifically designed for the built-in amp, and cannot be replaced with standard
Class D Amplifier: The enclosure contains a built-in 200-watt
Class D (digital) amplifier that allows RCA or speaker-level input. The amplifier
is highly efficient and designed specifically for use with the subwoofers in the
Electronic Bass Control (EBC): The EBC is a wired remote and
allows you to adjust the bass level from anywhere in the vehicle. Installing the
EBC is optional.
Low-pass Crossover: The low-pass crossover point is adjustable
from 50 to 150 Hz for a seamless transition between the output of this unit and
that of the other speakers in the vehicle.
- Gain Control: rotary control; set the
gain of the amplifier is match the input
- Crossover Control: rotary control; adjust
the crossover from 50 to 150 Hz
Auto Turn-On Feature: When speaker level inputs are used, the
system will automatically turn on and off with the radio.
Note: The auto turn-on feature does not
operate when preamp level inputs are used, connecting the
remote turn-on lead is required.
Tools Required: The manual provides this list of required
- Powered Screwdriver
- #2 Phillips Head Bit
- 6" Bit Extension
- 10mm Wrench
- 5/16" Wrench
- Trim Panel Removal Tool
- Wire Cutters