Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
The Clarion WH105 automotive RF stereo headphone system includes two wireless
stereo headphones, an RF transmitter and an RCA patch cord to connect an
external source. Once the transmitter receives the signal, it is sent to the
stereo headphones. Because the transmitter sends signal via radio
frequency, it can be mounted anywhere in your vehicle's interior.
Headphones: The two sets of headphones have foam
on-the-ear cups, a plastic adjustable headband, volume control, power switch,
and a battery compartment for two "AAA" alkaline batteries (not
included). An automatic On/Off microswitch in the earcups saves battery power by
turning on the headphones only when they are being worn.
Automatic Level Control: This
headphone system has an automatic level control to prevent input signal
overloading. This assures the signal is clear and free of distortion and
protects you from unexpected loud bursts of audio through the headphones.
Transmitter Mounting: The self-adhesive hook-and-loop
fastener on the bottom of the transmitter allows you to mount the transmitter on
any flat surface in your vehicle.
Important Safety Note:
The headphones are for passenger use only! Most states prohibit the use of
headphones by the driver while operating the vehicle.
Back Panel of RF Wireless
- Power On/Off Switch: allows you to turn the
transmitter on or off
- Channel Select Switch: allows you to choose channel
1, 2, or 3
Right Earcup of Each Set of
allows you to fine tune reception of the desired audio source
allows you to adjust the volume of the headphones
Left Earcup of Each Set of
- Power On/Off Switch:
turns the headphones on or off
- Auto On/Off Microswitch:
turns the headphones on when they are placed on your head and turns the
headphones off when they are removed
Front Panel of
RF Wireless Transmitter:
- Power Input: 2-pin
jack for use with supplied power harness
Left Side of RF
- Antenna: 58"
Right Side of RF
- Source Input: stereo RCA jacks
W=5.914", H=1.159", D=2.623"
- Headphone Earcups: W=2.664", H=3.223",