Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Features
Controls
Connections
Features
Product Overview: The KSC-SW10 amplified subwoofer features a
built-in amp (38 watts RMS, 150 watts peak), a 5"x7" woofer, and a 5"x7" passive radiator (listed in the manual as 4-3/4" x 7-1/16"),
all housed in a rugged, ultra-compact enclosure that will fit just about
anywhere. The KSC-SW10 creates impressive bass through passive radiator
technology. Air pressure from the powered 5"x7" woofer moves the
5"x7" passive radiator, augmenting the bass response.
Wired
Remote Control: The wired remote control provides fingertip control over
your low frequencies. You can raise and lower the bass level and the crossover
point, plus switch the phase from 0° to 180°. The remote control can be attached
anywhere using the supplied Velcro strip.
Mounting
Options: The subwoofer, with its 3-9/16" height, can be mounted flat under
a seat in the passenger compartment, or in the trunk. With the included
brackets, the subwoofer can be mounted on its side in the trunk or in the cargo
area of an SUV.
Mounting Notes: The side bracket extends the overall depth to
4-3/8" and overall width to 16-1/8". If the upper screw holes are used, the side bracket raises the
overall height to 9-1/16". The horizontal mount brackets extend the overall
depth to 10-3/16"
Cable
Management: Even though the connections are on the bottom, the unit mounts
completely flat thanks to a 1-3/4" wide and 3/8" deep groove in the bottom for
cable management.
Controls
Wired Remote Control:
- Phase: 2-way switch to
select the phase of the subwoofer (0° or 180°)
- Frequency: rotary dial to
control the low pass filter frequency (range: 50 to 120 Hz)
- Level: rotary dial to
control the volume level of the subwoofer
Note: There are no controls
on the subwoofer.
Connections
Bottom of Woofer:
- Power/Speaker Input:
10-pin jack for use with supplied harness
- Remote: 6-pin RJ12
jack for use with supplied wired remote
- Line In:
stereo RCA jacks