Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Features
Inputs and Outputs
Wiring Recommendation
Features
Power Supply: The MRP-M650
amplifier's power supply uses MOSFETs to convert DC battery voltage to the
higher DC voltages needed for high power. It supplies positive and negative
voltages around 0V, rather than around 6V as with conventional single-polarity
power supplies. The result is higher power levels and a dynamic range wider by
as much as 10dB.
Low Pass Filter: The amp is
equipped with a 50-200Hz variable low-pass filter with a slope of 24dB/octave.
Subsonic Filter: This amp
utilizes a 15Hz subsonic filter to eliminate super low frequencies that can rob
power and damage speakers. The subsonic filter operates at all times, and cannot
be turned off.
Bass EQ: The Bass EQ circuit
provides a boost of 0-12dB at 50 Hz.
Inputs: The amplifier offers
both line-level and speaker-level inputs for 2 channels. The supplied speaker-level
input harness allows you to connect this amplifier to a receiver without preamp
outputs, either aftermarket or factory.
Terminal Covers: The amp comes with
two
plastic covers that protect and insulates the RCA, power, and speaker connections.
Four supplied
machine screws attach the covers to the amplifier.
Inputs
and Outputs
Left Side Of Amplifier:
- GND (ground): Gold-plated
terminal strip (0.34" wide)
- Battery: Gold-plated
terminal strip (0.34" wide)
- Remote:
Gold-plated terminal strip (0.34" wide)
- Speaker Output: Gold-plated
terminal strips for 1 speaker
Right Side Of Amplifier:
- Line Inputs: 1 pair of gold-plated
stereo RCA jacks
- Speaker Level Input: Molex
plug input for supplied 8-pin harness
Wiring Recommendation
Power Wiring: Because of the
size of the terminals, only 8 gauge power and ground wire will fit. Only the
Streetwires 8-gauge amp wiring kits contain the needed 60-amp fuse. If another
amplifier wiring kit is chosen, the fuse should be upgraded to 60 amps.