This vehicle-specific wiring harness makes connections between your new car stereo and your car's electrical system.
First, attach the color-coded wires on your Crutchfield harness to the wires from your new stereo. If you don't know how to use a soldering iron, we recommend that you purchase some wire connectors that you'll use to attach the Crutchfield harness to your factory harness.
Now, once this harness is connected to your new stereo, you'll be able to plug right into your car's factory radio connector. This harness makes installing your new stereo easier, and allows you to put the factory radio back when you sell your vehicle or return it at the end of the lease. A detailed instruction sheet comes with the harness. Warranty: 60 days.
Please read this important note: This harness may not contain provisions for every wire needed to complete your installation, and it will not accommodate special navigation, video, or factory steering wheel control connections. You will need a special adapter if you want your factory steering wheel audio controls to work with your new stereo.
Connections:
Note: You'll need to make a ground connection between your new receiver and your car's metal chassis. The package you receive will include two sets of wiring harnesses. Select and use the pair that matches your vehicle's harnesses.
- 12V constant power
- 12V switched power
- power antenna turn-on
- dimmer
- left front speaker +/-
- right front speaker +/-
- left rear speaker +/-
- right rear speaker +/-
Note: Most vehicles will require additional installation parts — please identify your vehicle if you haven’t done so, then check here for a list of parts. You can also call an Advisor for more information.
