-
Alpine KTX-H100MultEQ tuning kit for the Alpine PXA-H100
IN STOCK
- tuning kit works in concert with Alpine's PXA-H100 IMPRINT Audio Processor
- includes a calibration CD-ROM, microphone and cables, and a junction box for connections
-
Kicker 11DX125.22-channel car amplifier — 30 watts RMS x 2
IN STOCK
- 125 watts RMS x 1 bridged at 4 ohms
- selectable high- and low-pass filters
- Class AB amp technology
-
Kicker KX2Active 2-Way Electronic Crossover
IN STOCK
- Speaker- and preamp-level inputs
- 2 pairs of outputs (lows/highs)
- variable 40-300 Hz at 18 dB per octave
-
Alpine KTP-445A Power PackUpgrade your Alpine receiver to 45 watts RMS x 4
IN STOCK
- compact plug-and-play amplifier for Alpine in-dash receivers
- 45 watts RMS x 4 at 4 ohms
-
Kicker 11DX200.44-channel car amplifier — 25 watts RMS x 4
IN STOCK
- 100 watts RMS x 2 bridged at 4 ohms
- selectable high- and low-pass filters
- Class D amp technology
-
Kicker 11DX250.1Mono subwoofer amplifier — 250 watts RMS x 1 at 2 ohms
IN STOCK
- 140 watts RMS x 1 at 4 ohms (250 watts RMS x 1 at 2 ohms)
- low-pass and subsonic filters
- preamp and speaker-level inputs
-
Alpine KTP-445U Power PackUpgrade any car radio to 45 watts RMS X 4
IN STOCK
- runs off same power circuit as receiver
- compact amplifier with universal plug for in-dash receivers
- 45 watts x 4 at 4 ohms
-
Alpine MRP-F300V-Power Series 4-channel car amplifier — 50 watts RMS x 4
IN STOCK
- 150 watts RMS x 2 bridged
- variable low- and high-pass filters
- selectable bass boost
-
Alpine MRP-M500Mono subwoofer amplifier — 500 watts RMS x 1 at 2 ohms
IN STOCK
- 300 watts RMS x 1 at 4 ohms
- variable low-pass filter
- variable bass boost
-
Alpine MRV-M250Mono subwoofer amplifier — 250 watts RMS x 1 at 2 ohms
IN STOCK
- 150 watts RMS x 1 at 4 ohms
- 200 watts RMS x 1 at 1 ohm
- variable bass boost
-
Kicker 12CX300.1Mono subwoofer amplifier — 300 watts RMS x 1 at 2 ohms
OUT OF STOCK
Expected: 5/27/2013
Reserve yours today
- 150 watts RMS x 1 at 4 ohms
- includes hardware for vertical mounting
- preamp and speaker-level inputs
-
Kicker KX3Active 3-Way Electronic Crossover
IN STOCK
- Two pairs of inputs
- 3 pairs of outputs (subwoofer/front/rear)
- front/rear variable 35-400 Hz at 18 dB per octave (20X multiplier on front)
-
Kicker 11DX300.22-channel car amplifier — 75 watts RMS x 2
IN STOCK
- 300 watts RMS x 1 bridged at 4 ohms
- variable high- and low-pass filters
- Class AB amp technology
-
Kicker 12PX100.22-channel amplifier — 50 watts RMS x 2 at 2 ohms
IN STOCK
- extremely compact, weather-resistant amp for small cars, ATVs, boats, etc.
- selectable high-pass filter
- 25 watts RMS x 2 at 4 ohms
-
Kicker 12PX200.1Mono subwoofer amplifier — 200 watts RMS x 1 at 1/2 ohm
IN STOCK
- extremely compact, weather-resistant amp for small cars, ATVs, boats, etc.
- 100 watts RMS x 1 at 1 ohm
- switchable low-pass filter
-
Kicker 11ZX300.1Mono subwoofer amplifier — 300 watts RMS x 1 at 2 ohms
IN STOCK
- 150 watts RMS x 1 at 4 ohms
- preamp and speaker-level inputs
- selectable low-pass filter (80 Hz, 24 dB/octave)
-
Kicker 40KX200.22-channel car amplifier — 50 watts RMS x 2
IN STOCK
- 200 watts RMS x 1 bridged at 4 ohms
- speaker-level inputs and preamp outputs
- variable high- and low-pass filters
-
Alpine MRV-F3004-channel car amplifier — 50 watts RMS x 4
IN STOCK
- 150 watts RMS x 2
- variable low- and high-pass filters
- selectable bass boost
-
Alpine MRV-M500Mono subwoofer amplifier — 500 watts RMS x 1 at 2 ohms
IN STOCK
- 300 watts RMS x 1 at 4 ohms
- 350 watts RMS x 1 at 1 ohm
- variable bass boost
-
Kicker 11PXI50.22-channel amplifier and controller for iPod® or iPhone® — 25 watts RMS x 2 at 2 ohms
IN STOCK
- works in any vehicle with a 12-volt charging system
- back-lit blue LED wired remote with large rubber buttons
- weather-resistant
Car Amplifier Shopping Guide If you want your music to be loud, amplifiers are definitely part of the picture. But an amp can do much more than just get other people's attention.
Video: Car Amplifier ChannelsOne of the first steps in choosing an amplifier for your car audio system is to decide how you intend to use the amplifier, and thus how many channels it should have. This short video gives you a quick overview to help answer that question.
Boston Acoustics — a sound decisionWhen the offer came through to "audition" some new Boston Acoustics gear in my car ... well, I just couldn't refuse. After all, it'd been an awfully long time since my last upgrade, and I was eager to check out just how good Boston stuff is these days.