Features
Specifications
Dimensions
Features
Rear View Camera: The Sony Xplod XA-R800C rear-view camera helps to
improve your view while backing up your vehicle. The XA-R800C rear-view camera
is ideal for trucks, SUVs, mini-van, and larger sedans. The Sony Xplod rear-view
camera offers flexible mounting options with adjustable tilt, and features 138°
horizontal x 92° vertical viewing area for
increased visibility. The Sony Xplod XA-R800C rear-view camera is designed for
use with mobile video in-dash headunits featuring a rear-view camera Input
(composite video).
Compatibility: The Sony Xplod XA-R800C rear-view camera is designed
for use with Sony and other manufacturer in-dash mobile video headunits that
feature an integrated monitor and rear view camera input (composite video).
Aluminum Chassis: The rear-view camera features a compact
waterproof aluminum housing, making it perfect for mounting outside the vehicle.
CCD Sensor: The Sony rear-view camera features a 1/4" color CCD sensor
lens with approximately 250,000 total pixels (510 H x 492 V). The CCD sensor
provides a 16:9 NTSC mirror image on your connected monitor.
Wide Viewing Angle: The Sony Xplod rear-view camera offers a 138°
horizontal x 92° vertical viewing area which
provides an excellent near field view of anything behind you.
Automatic Sensitivity Compensation: The rear-view camera automatically
adjusts to the available light, from 1.0 lux to 100,000 lux. The 1.0 lux rating
ensures you'll have visibility at night in low light, while the 100,000 lux
rating means the picture won't be washed out in bright sunlight.
Auto Switching: You can hookup the Sony rear-view camera to your
vehicle's reverse light signal input for auto-switching with compatible mobile
video in-dash headunits.
Composite Video Output: The Xplod rear-view camera features a
composite video output and includes a 16.5' composite video cable which connects
to your compatible mobile video in-dash headunit's composite video, rear-view
camera input.
Hide-Away Power/Signal Module: The hide-away power/signal module
features a 5-pin molex connector, a 40" power/ground lead (with in-line 0.5A
fuse), and a composite video output. The rear-view camera's attached 10'
power/ground/signal harness attaches to the hide-away module's 5-pin molex
connector. The hide-away module's 40" power/ground lead connects to your
vehicle's +12-volt reverse lamp wire and gets grounded to a metal surface of
your vehicle. The included 16.5' composite video cable is connected between the
hide-away module's composite video output terminal and your compatible mobile
video in-dash headunit's rear-view camera input.
Convenient Mounting: The Sony Xplod rear-view camera comes supplied
with plastic mounting shroud and metal mounting bracket. The mounting bracket
lets you adjust the angle of the rear-view camera up or down. The mounting
bracket can be installed using its two-sided tape or using the four supplied
mounting screws.
Specifications
Power Requirements: 12 V DC car battery (negative ground)
Operating Temperature: -22° to 140° F
Video Output: NTSC mirror image (75-ohms)
Sensor: 1/4-" color CCD sensor (16:9 aspect)
Number of Pixels: 510 (horizontal) x 492 (vertical); approximately
250,000 total pixels
Lens: focal length of 1.22mm, F value of 2.8
View Angle: 138° (horizontal), 92°
(vertical)
Signal-to-Noise Ratio: more than 40 dB
Horizontal Resolution: approximately 300 lines
Illumination Range: approximately 1.0 to 100,000 lux
Dimensions
Rear-View Camera (alone):
- Width = 0.9375"
- Height = 0.9375"
- Depth = 1.25" (with attached cable)
Rear-View Camera (with shroud):
- Width = 1.5"
- Height = 1.125"
- Depth = 1.3125" (with attached cable)
Hide-Away Box:
- Width = 2.75"
- Height = 1.4375"
- Depth = 4.0625" (with cables)
