About the Audiobahn A12005DN
If you want Audiobahn performance in a smaller package, check out the Intake Series Class D subwoofer amps. A built-in air intake and a cooling fan ensures that these compact workhorses will stay cool through hours of heavy use.
You get the precise sonic control that you expect from Audiobahn. A variable low-pass filter trims unwanted frequencies to improve your sub's performance, and you can use the variable bass boost to bring the hammer down when you need it.
The A1205DN mono amplifier pumps out 375 watts RMS of Class D power to a single subwoofer, or 600 watts to a 2-ohm load. Preamp- and speaker-level inputs allow you hook this amp into almost any system.
Like to be in control? The optional remote-mount digital voltmeter lets you keep an eye on power levels from the driver's seat, while the optional wired remote bass boost provides variable control over your low-frequency punch.
Product highlights:
- Class D mono subwoofer amplifier
- 375 watts RMS x 1 at 4 ohms
- 600 watts RMS x 1 at 2 ohms
- 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
- 2 x 30-amp fuses
- 40-120 Hz low-pass crossover, 18 dB/octave
- 0-18 dB bass boost at 45 Hz
- preamp outputs
- speaker- and preamp-level inputs
- cooling fan
- cobalt blue illumination
- 11-1/16"W x 2-1/2"H x 12-9/16"D
- warranty: 1 year
- MFR # A12005DN
What's in the box:
Audiobahn A12005DN owner's manual
- A12005DN mono amplifier with three 25-amp fuse inserted into the chassis
- 12" Speaker-level input harness
- 2mm Allen wrench
- 2.5mm Allen wrench
- Four 0.75" self-tapping screws
- Pair of white gloves
- Two Audiobahn stickers
- Product ID Card
- Operating Instructions
- Tech Tips literature
- Product Registration sheet
- Car Audio and Motocross subscription cards
Customer reviews for Audiobahn A12005DN
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Audiobahn A12005DN
Features & specs
| Performance | ||
|---|---|---|
| RMS Power Output (Watts x Channels) |
375 x 1 | |
| Peak Power Output (Watts x Channels) | 1200 x 1 | |
| Power at 2 Ohms (Watts x Channels) | 600 x 1 | |
| Power at 1 Ohm (Watts x Channels) | --- | |
| Bridged Power (Watts x Channels) | N/A | |
| Minimum Impedance Bridged | N/A | |
| Minimum Impedance Unbridged | 2 | |
| Minimum Impedance | 2 | |
| Best Frequency Response | 20-20kHz Hz | |
| THD at Rated RMS Power | 0.05% | |
| Signal to Noise Ratio | --- | |
| Input Voltage | 14.4v | |
| Features | ||
| Amplifier Class | D | |
| Low-Pass Crossover Frequency | 40-120 Hz | |
| Low-Pass Slope (dB/octave) | 18 dB | |
| High-Pass Crossover Frequency | N/A | |
| High-Pass Slope (dB/octave) | N/A | |
| Bass Boost | 0-18 dB | |
| Bass Boost Frequency | 45 Hz | |
| Fan Cooled | Yes | |
| Fuse Rating | 25 x 3 | |
| Speaker Level Inputs | --- | |
| Preamp Outputs | 1 pair | |
| Width (inches) | 11-1/16 | |
| Height (inches) | 2-1/2 | |
| Depth (inches) | 12-9/16 | |
| Parts Warranty | 1 Year | |
| Labor Warranty | 1 Year | |
Product Research
Features
Inputs and Outputs Notes
Class D Power Amplifier: The compact Class D design draws less current and puts out more raw power so you can run these amps all day long without worrying about thermal overload.
High-gloss Chrome-plated Finish: This amplifier has a high-gloss chrome-plated finish. A pair of white cotton gloves is included with the amplifier to prevent fingerprint smudges when handling and mounting the amp.
Cooling Fan: This amp has a built-in air intake and a cooling fan on top, ensuring cool, reliable operation.
Variable Subsonic Filter: The subsonic filter (variable from 15Hz to 60Hz) allows the amplifier to block ultra-low frequencies that your subs can't reproduce, improving the efficiency of your speaker system.
Internal Crossover: The internal low-pass crossover is adjustable from 50Hz to 150Hz and has a slope of 18dB/octave. The crossover can be turned on or off.
Bass Boost: The bass boost control allows you to dial-in a 0dB to +18dB gain in bass output, centered at 45Hz.
Optional Remote Control: The optional ABR-100T remote bass boost control allows you to adjust the bass output from your seat.
Optional Digital Voltmeter: This amp can be used with an the optional ADM-100T remote-mount digital voltmeter.
Line Out: The amplifier is equipped with an RCA line output to send an audio signal to another amplifier in your system.
Protection Circuitry: The amplifier has 4-way protection circuitry, which protects the amplifier in the following cases: overheating, input overload, short circuit, and DC offset.
LED Indicator: The amplifier is equipped with an LED indicator to let you know that the amplifier is receiving or power or is in protection mode.
- Power: The LED illuminates blue when the amplifier is turned "ON".
- Protection: The LED illuminates red indicating the amplifier has gone into a self-preservation mode.
Front of Amplifier:
- Speaker: set screw terminals that can accept up to 8-gauge wire
- BATT (power): set screw terminal that can accept up to 4-gauge wire
- GND (ground): set screw terminal that can accept up to 4-gauge wire
- REM (remote turn-on): set screw terminal that can accept up to 8-gauge wire
- Low Input: one pair of RCA connections
- Line Out: one pair of RCA connections
- Fuses: three 25-amp blade fuses
Back of Amplifier:
- DVM: phone-type jack for use with optional remote-mount digital voltmeter
- Remote: phone-type jack for use with optional remote bass boost control
- High Input: 4-pin male jack for use with supplied speaker-level input harness
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
I have this amp powering a single 10" sub, at 2 ohms, it hits really hard! Shipping was fast, customer service was great, I highly recommend it!
KSEDER2 from Yakima, WA