Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Compatibility: These Q-Forms
kick panels are designed to fit your 1998-2001 Nissan Altima. The black color is
matched to the black interior of the 1998-2001 Nissan Altima.
Optimum Imaging: With Q-Forms
kick panels, the speakers are positioned so they are equidistant from your ears,
putting you in the "sweet" spot.
- Color matched to the interior of
- Molded in one piece for a factory
- Speakers positioned and angled for
optimum stereo staging and imaging
- Equalized path lengths reduce
right/left volume bias
Compatible Speaker Sizes: You
can mount a tweeter with a maximum diameter of 2-1/2". The midrange/midbass
section of the Q-Forms is made to accept speaker sizes ranging from 3-1/2"
to 5-1/4". The maximum frame width/diameter allowable for the midrange/bass
driver is 6-1/8", so a few 6-1/2" units may fit. Our database
contains information relating to cutout requirements, frame width, and mounting
depth for all of our speakers, so please check with a Crutchfield Product
Advisor before ordering if you wish to use 6-1/2" speakers in these kick
Tweeter Mounting: The tweeters
can be flush or surface mounted. If they are surface mounted, make sure to allow
for clearance from obstructions such as the parking brake.
Allowable Speaker Mounting Depths:
Giving exact mounting depths is not possible since it will depend to some extent
on the space available behind the factory kick panel, which can vary; however,
the minimum flush mount depth is 3/4" for the tweeter and 2-1/2" for
the woofer/mid bass component.
Hole Cutting Required: Mounting
speakers requires cutting the Q-Forms plastic. The Q-Forms do not come with
precut holes, so holes must be cut to fit the speakers you choose to install in
the Q-Forms. If you decide to surface mount tweeters to the Q-Forms, the only
holes that must be cut are the ones for the midrange/midbass drivers. If you
want to flush mount tweeters to the Q-Forms, holes must be cut for the tweeters
and midrange/midbass drivers.