12 Volt DC Power Supply
Share this product:
Our take on the Russound 846C
The Russound Model 846C Power Supply connects to the status input on the A-CB4iR A-BUS interface module and allows you to take advantage of the System Status feature. Here's how it works: you plug the 846C into a switched AC receptacle, usually on the back of the audio receiver being used. When the audio receiver is turned on, it sends current through the power supply, which tells the green LEDs on the interface module and on the A-BUS volume controls to illuminate, letting you know your system is turned on, even if you're in another room.
- 110V only; 12 Volt DC 200 mA, regulated
- dimensions: 2" wide x 2-3/4" high x 1-5/8" deep
What's in the box?
- 12V power supply with 6' cord
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
A-BUS System Overview
846-C is a12V power supply that provides "status" information to the
hub. It plugs into a switched AC output on the back of your system's audio
receiver, and sends a signal to the Hub whenever the source is powered up.
117VAC, 60Hz, 7W
12VDC, 300mA Regulated
A-BUS System Overview:
Instead of multi-channel amplifiers, speaker selector boxes, autoformers,
impedance-matching equipment and long runs of expensive speaker wire, A-BUS
audio distribution includes amplified in-wall volume controls, and wiring
installation time is significantly reduced as only a single 8-connector CAT-5
wire (not included) is run to each location. Simply add A-BUS to your existing
stereo/home theater system with an A-BUS Hub and the A-BUS Amplified Controls
will provide independent volume and source control to each room where an A-BUS
module is installed. Each control contains a stereo amplifier rated to deliver
7.5 watts RMS per channel; the AC current to power each amplifier is delivered
via the CAT-5 cable. The system also includes IR remote sensing and
retransmission to let you control your components from any of the volume control
locations, and included is a remote that controls the volume control itself and
can be used to teach the Russound codes to IR learning remotes.
Reviews for the
Average Customer Review:
Review this product:
Thanks for taking the time to share your experiences about this product. Please
be sure to focus your comments on the product itself. Read our
Review Guidelines for more information.
For a more in-depth review and enhanced detailed information on the
Russound 846C, please visit the Crutchfield website product
Get live, personalized service from an expert
Crutchfield Advisor: Hi there.
We're happy to answer questions or provide additional info about this item.
Advisors also available at 1-888-600-3963