Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Features
Overview: This 20" On-Q enclosure (EN2000) is the perfect
solution for a basic structured wiring system. It features three large top
openings that make pulling wire easier as well as additional knockouts, side
lances, and side tabs for more flexible mounting. It even includes two bottom
panel knockouts for mounting two duplex receptacles. It includes a screw-on
cover.
Note: The On-Q/Legrand Core Line Enclosures are
available in four sizes - 14", 20", 28", and 42". Each enclosure features a
screw on cover. The 28" and 42" is also available with a hinged cover.
Steel Construction: The On-Q enclosure features a rugged
20-guage steel housing and cover with durable power-coat finish in white.
- Steel Housing: The housing features two 6" wide x 18"
tall rail sections to accommodate your On-Q telephone, RG6, Audio/Video, LAN, and
Security modules. The On-Q modules (sold separately) easily snap-in.
- Screw-On Cover: The steel screw-on cover attaches to
the steel housing by 4 supplied machine screws.
Identification Labels: The structured wired enclosure comes
supplied with a self-adhesive cable identification table which can be placed on
the back side of the cover so you can easily identify your cables and wiring.
Placement: The On-Q structured wired enclosure should be
centrally located in the house to minimize the length of cable runs and in a
climate controlled area. Temperature must be from 32-degrees to 122-degrees
Fahrenheit. Humidity is to be controlled to not condense inside the enclosure.
Mounting: The enclosure may be either surface mounted or
recess mounted between two studs installed on 16 inch centers.
- Surface Mounting: Typical surface mounting is on a 3/4"
inch plywood back board and attaching the enclosure to your wall with wood
screws (not supplied).
- Recessed Mounting: There are two methods for recess
mounting the On-Q enclosure. In half inch drywall installations the
enclosure may be mounted to the front of the studs using standard screw
(sold separately). Alternatively, you may position the enclosure to the
desired height and fasten to the sides of the studs using the slots in the
tabs.
Grounding: The On-Q enclosure must be grounded. The ground
cable is to be routed from the enclosure to the house electrical ground. The
ground screw is located inside the bottom of the enclosure. Use a minimum of 14
AWG copper ground wire.
Dimensions: The housing and cover dimensions.
- Housing: Width = 14.3125", Height = 20.125", Depth = 4"
- Cover: Width = 15.5", Height = 21.25", Depth = 0.25"
