About the Polk Audio Monitor 50
Get big, room-filling sound at an affordable price! The high-performance Monitor 50s feature Polk's famous Dynamic Balance® drivers a 1" dome tweeter and dual 5-1/4" woofers dish out rich, vibrant sound all across the audio spectrum. Enjoy pristine reproduction of stereo music, or make these impressive tower speakers an integral part of a voice-matched Monitor home theater setup, either as front or a surround speakers.
The Monitor 50s are constructed with non-resonant MDF, and include front-to-back and side-to-side internal bracings for cleaner, clearer, more lifelike sound. Bold, fat stabilizer feet keep these tall, slender tower speakers steady on carpet or hardwood floors. And dual 5-way binding posts allow for bi-wiring or bi-amping.
Recommended center speaker: Polk CS1
Recommended surround speakers: Polk Monitor 30 or Polk Monitor 40
Priced per pair
Product highlights:
- video-shielded
- bass-reflex design
- frequency response 57-24,000 Hz (-3dB)
- 8-ohm impedance
- sensitivity 89 dB
- handles up to 150 watts
- dual 5-way binding post terminals
- cherry vinyl finish
- 8-1/8"W x 36-1/4"H x 10-3/4"D
- warranty: 5 years
What's in the box:
Polk Audio Monitor 50 owner's manual
- 2 Cherry floor-standing speakers
- Owner's Manual
- Online registration sheet
Customer reviews for Polk Audio Monitor 50
Loading...
Loading reviews...
Average review:
4.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Polk Audio Monitor 50
Features & specs
General | ||
---|---|---|
Enclosure | Bass Reflex | |
Finish | Vinyl | |
Color | Cherry | |
Tweeter | Dome | |
Tweeter Size (inches) | 1 | |
Midrange Size (inches) | N/A | |
Woofer Size (inches) | 5.25 | |
Woofer Composition | Bi-laminate | |
Woofer Surround | Butyl rubber | |
Built-in Powered Sub | --- | |
Dolby Atmos Drivers | ||
Connector Type | 5-way post | |
Bi-amp Inputs | Yes | |
Parts Warranty | 5 Years | |
Labor Warranty | 5 Years | |
Specifications | ||
Power Range | 20-150 | |
Frequency Response | 57-24k Hz | |
Sensitivity | 89 dB | |
Impedance (Ohms) | 8 | |
Subwoofer Amp Power | --- | |
Height (inches) | --- | |
Width (inches) | --- | |
Depth (inches) | --- | |
Weight | --- |
Product Research
Features
Dynamic Balance: Dynamic Balance is a proprietary Polk Audio technology using laser imaging to determine what combination of speaker materials create the least amount of resonance. Eliminating resonance in speakers results in a wide, smooth response and low distortion.
Polymer Composite Woofers: Each speaker features two lightweight, yet stiff Bi-Laminate composite woofers with good damping, giving you high efficiency, excellent bass, and low distortion. For high performance durability, each woofer uses a butyl rubber surround.
Silk/Polymer Tweeters: Each speaker has a 1" fabric/polymer dome tweeter that provides clear, detailed highs. Each tweeter uses a heat sink on the Neodymium magnet for superior heat dissipation, power handling and reliability.
Acoustically Inert Cabinets: The speaker cabinets feature all-MDF construction with internal bracings that virtually eliminate sound-muddying resonance.
Ports: There is a single critically-tuned port opening on the front of each speaker that has low port noise for increased and extended bass response.
Stabilizer Feet: The large stabilizer feet ensure stability on carpet and hard floors for precise bass response and superior imaging.
Dual 5-Way Binding Posts: Each speaker has two sets of gold-plated 5-way binding posts connected by gold-plated jumpers. Using the dual 5-way binding posts, you can bi-amp or bi-wire the speakers.
Magnetically Shielded: Each speaker is magnetically shielded, allowing you to place them near your television without distorting the picture.
Note
Frequency Response Note: The overall frequency response is 42 Hz-25 kHz and the -3 dB frequency response is 57 Hz-24 kHz.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...