Looking for car stereos?Start shopping
2007-08 Honda Fit
2007 • 2008
2007 Honda Fit (Crutchfield Research Photo)
Subcompact economy cars were once derisively (and in many cases, deservedly) referred to as “penalty boxes.” Just ask one of our writers about the 3-state, 800-mile round-trip he endured at the wheel of a rented subcompact a decade ago. On second thought, just…don’t. Trust us; the only positive thing he’ll grudgingly say about that car is that it got great gas mileage.
The 2007-08 Honda Fit gets great mileage, too. But, unlike our friend’s unpleasant weekend companion, the first-generation Fit also looks kinda cool, holds a surprising amount of stuff, gets out of its own way on the interstate, and actually provides comfortable seating for at least two adult humans. No wonder it was a perennial fixture on every car magazine’s “Best” list.
When a gallon of gas costs more than a quarter-pound cheeseburger, a subcompact is a very good thing to have. The Honda Fit proves that a subcompact can also be a very good car.
The base-model Fit is, as you might expect, rather basic, though it does have a four-speaker AM/FM/CD system. If you buy a Sport model, you’ll find a host of upgraded features, including an AM/FM/CD/MP3/WMA receiver (with an aux jack) and six speakers.
The Honda Fit's factory radio. (Crutchfield Research Photo)
Replacing your factory radio
Removing the factory radio isn’t difficult, but it isn’t as straightforward as it might be in a larger car. The Fit makes very efficient use of every inch of space, but that also means that every inch of space is being used. That’s why you’ll find yourself removing the glove box (there’s wiring back there and you need to get to it) on your way to removing the radio. Again, it’s not difficult, but it is an extra step.
The actual removal of things can be accomplished using screwdrivers, a socket wrench, and a panel tool, but you’ll also need patience when you’re removing the radio/heater control assembly. It’s held in place by seven (7) clips that, in typical Honda fashion, are very, very tight. Use extreme caution when prying around the edges and releasing those clips. Complete instructions can be found in the Crutchfield MasterSheet™ that’s included free with your Crutchfield stereo purchase.
The aftermarket dash kit blends in beautifully. (Crutchfield Research Photo)
When you look at the stock radio/heater assembly, you’ll notice that the right edge wraps around the knee panel on the passenger’s side. This interesting bit of asymmetric design is, thankfully, duplicated in the dash adapter kit, which is available at 50% off with your Crutchfield stereo purchase. The kit works with both single-DIN and double-DIN receivers, so you can install everything from a run-of-the mill CD receiver to a 4” full-screen navigation unit in your Fit.
The installation kit comes with complete mounting and installation instructions, as does the wiring harness that comes free with most Crutchfield stereo purchases. Once your new receiver is mounted and installed, reassemble the dash by reversing the removal process.
Tools needed: short Phillips screwdriver, small flat blade screwdriver, 8mm socket w/ ratchet and extensions, panel tool
Steering wheel control: If you want to continue using your steering wheel audio controls with a new stereo, you'll need the PAC SW-IRC steering wheel control interface. You have to remove the stereo to install this adapter, so install it at the same time you install the new stereo to save yourself some work.
Replacing your factory speakers
The Honda Fit's front door, with the panel removed. (Crutchfield Research Photo)
On the standard Fit, you’ll find 6-1/2" speakers in the base of each front door. The Sport model adds a set of tweeters in the sail panels, but we’ll get to those in a moment. For now, let’s take a look into the doors.
Aftermarket 6-1/2" or 5-1/4" speakers will work nicely here, but a speaker adapter bracket (included free with your Crutchfield speaker purchase) is required in either case. You’ll also have to do some minor drilling to install your new speaker/bracket combo.
To remove the door panels, you’ll start by removing the door release assembly, then the armrest. Next, you’ll need to disconnect the door release rod, then pry the armrest away from the door panel. Here, and when removing the door panel itself, you’ll encounter those remarkably snug Honda retaining clips. As always, use extreme care when prying them away with your panel tool. Your Crutchfield MasterSheet has in-depth details on this and other aspects of the installation.
To remove the speaker, use a flat head screwdriver to push the metal clip at the top of the speaker downward while pushing the speaker outward to release it. Disconnect the wiring harness and remove the factory speaker.
Use a flat head screwdriver to push the metal clip at the top of the speaker downward. (Crutchfield Research Photo)
Most aftermarket speakers don’t attach with metal clips. So, to install your new speaker, you’ll need to drill new mounting holes. Mount the new speaker in the adapter bracket, then place the speaker/bracket assembly in the mounting location and use it as a template to mark mounting holes with a pencil or permanent marker. Then, drill the new mounting holes with a 1/8" bit. There’s nothing difficult about drilling a hole, of course, but you are drilling into a metal car door here, so be careful, be patient, and wear eye protection.
From there, you’ll attach the speaker wiring adapter (free with your speaker purchase) to your Fit’s speaker harness, then secure the speaker/bracket combo to the door using self-drilling/self-tapping screws. In all likelihood, your speakers won’t come with mounting hardware, but the screws are available at your local hardware emporium. If you’re planning to upgrade the rear speakers, buy extras now and save yourself a trip. Once the assembly is attached, test to make sure both speakers are working properly before you reinstall the door panel.
Tools needed: Panel tool, Phillips screwdriver, drill and 1/8" bit
The Fit's door-mounted tweeter. (Crutchfield Research Photo)
The tweeters, found on the Sport model only, are located behind grilles on the door panels. Getting to them is merely a matter of removing four Phillips screws and removing the tweeters from their brackets. The factory models measure 1.416" in diameter, with a mounting depth of 1.494".
To install new tweeters underneath the factory grille, you’ll have to find or fabricate new mounting brackets. Our universal backstraps will help, because they can be cut or bent to the size or shape you need for your Fit. Depending on the aftermarket tweeters you choose, you also have the option of surface-mounting them on the sail panel.
A speaker wiring adapter is not available for the tweeters, so you’ll need to splice into the factory wiring system. A set of Posi-Products connectors can make this easier. These wonderful little things help you make connections without crimping, soldering, or tape. Just strip your stranded wires, insert them in the caps, then hand-tighten the two caps together. The wire ends get locked between opposing cone shapes to create a water-, dirt-, vibration-, and heat-proof housing.
All this might sound a lot more complicated than it is, but don’t let this added bit of work deter you from adding a set of component speakers. The improvement in sound quality is well worth the effort.
Rear Door Speakers
Replacing the rear door speakers is a lot like replacing the front door speakers. And when we say “a lot,” we mean “essentially the same.” You’ll need to remove the sail panel in the trailing edge of each rear door before diving into the rest of the removal process, but that’s the only notable addition to the task list. Just remember to be gentle when prying off the panels and to be careful when drilling your new speaker mounting holes.
Tools needed: Panel tool, Phillips screwdriver, drill and 1/8" bit
Powered subwoofers like the Bazooka bass tube make it possible to add bass without losing all of your cargo space
Adding bass to your Fit
For a relatively tiny car, the Fit has a lot of available storage space. With the seats in their upright and locked position, you have 40” W x 21” H x 27” (bottom) /17” (top) D worth of available space back there.
If you’re still planning on using your Fit to buy groceries and things like that, you might want to consider a powered subwoofer. They take up less space that a subwoofer box and can fill your car with plenty of bass.
Powered subs are also more convenient because the amp is built in, so you don't have to shop for — or install — separate components.
iPod® and satellite radio adapters: Better sound is a wonderful thing, but not everyone is up for replacing the factory receiver. Not a problem. You can still add versatility and great sound to your Fit, especially if you’re okay with the idea of going CD-free. We offer several adapters that will allow you to use an iPod, MP3 player, or satellite radio with the factory system. Bear in mind that you need to connect the adapter to the back of the factory radio, so you’ll still need to follow the radio removal instructions above. You can upgrade the speakers later for even better sound.
Dynamat: The Fit has a well-earned reputation as a solidly built car, but it’s still a subcompact and it can be a bit buzzy at highway speeds. The Dynamat Xtreme Door Kit is the perfect way to seal out the noise and seal in the sound. This heavy-duty insulating material is easy to install, and it really makes a difference. This is a great thing to do while you’re installing new speakers. Why take the doors apart twice if you don’t have to? One kit will take care of the front doors.
Security: Installing a security system in your Fit is reasonably straightforward. All the connections will be made under the driver’s side dash, behind the knee panel. FlashLogic's FLCAN module is a terrific choice if you’re adding a system with a remote starter. This module connects to the databus interface, enabling communication with any Code Alarm keyless entry or security system. The module bypasses the factory immobilizer for remote start, and also controls the door locks. It also works with many other aftermarket alarm systems.
For a basic security system without remote start, the analog door lock wires are easily accessible under the dash.
If you're unfamiliar with installing car security equipment, please speak to one of our Advisors before attempting to install a security system.
A homepage for your vehicle
Tell us about your vehicle, and you'll be able to see:
New to Crutchfield? Here are 3 things we want you to know about us.
Custom Car Showroom