Looking for car stereos?Start shopping
2002-06 MINI Cooper Hatchback
2002 • 2003 • 2004 • 2005 • 2006
Originally designed by Britain’s Austin Motor Company in 1956, the MINI has been part of the American car scene for over 50 years. Throughout the decades, and regardless of who owned the marque, the little car has always offered practical utility, oddly dramatic styling (‘boxy but cute,’ ‘powered roller-skate’ etc.), and a healthy dose of driving fun, particularly when considering the car’s performance variant the "Cooper S." After suffering through a series of corporate mergers and acquisitions between the MINI’s 1959 roll-out and the early 90s, BMW finally took control of the product line in 1994.
|2002 MINI Cooper coupe (Crutchfield Research Photo)|
After continuing to produce the original car for six years, BMW publicly announced in 2000 that the MINI would be entirely updated, including an extended wheelbase/track, a comparatively spacious interior, significantly updated appointments and safety amenities, and increased space for electronic/entertainment packages. Since the 2002 roll-out, the ‘new’ MINI has been a solid hit, with sales improving every year. Today, MINI offers ten different versions in their lineup, ranging from a MINI hardtop to a MINI convertible.
Video courtesy of PRRACEwire
|MINI factory radio (Crutchfield Research Photo)|
The standard MINI Cooper sound system in the hatchback offers an integrated high-definition AM/FM/CD unit, stacked below the car’s primary instrument cluster, with remote receiver controls placed on either side of the steering wheel’s center line. In addition to the receiver itself, the sound system includes a woofer/tweeter configuration in each of the front doors, and rear speakers mounted in the rear side panels at hip level. The front door system consists of a 6-1/2" woofer at the bottom of the door, and a 1-3/8" tweeter placed at the top of the door panel to handle the highs. In each rear side panel, you’ll find a standard 6"x 9" woofer. All speakers, regardless of location and position, are protected by grilles.
|Removing factory radio from the dash (Crutchfield Research Photo)|
Replacing Your Factory Radio
It’s pretty easy to work on the factory receiver, but you'll have to remove a few dash and console pieces before you can remove it. It floats at the top of a center accessory column, and is unencumbered by other horizontal dash sub-assemblies. This assembly is angled slightly forward to give the driver better access. Once you get the receiver out of the stack, you’ll have more than 7 inches in depth to work with, so any new receiver should fit.
|MINI's dash disassembled (Crutchfield Research Photo)|
Tools: You won’t need too many tools to install a new stereo — just a Phillips-head screwdriver, a circuit tester, and a crimping tool with a supply of crimp caps. The only unusual tools you’ll need will be a T33 Torx driver and a notched panel removal tool, although you can use a wide-head, slotted screwdriver instead if you’re careful. Regardless, all tool types and sizes are clearly described in your Crutchfield MasterSheet™.
You'll need a mounting kit to trim out the new radio, a wire harness, and an antenna adapter that'll let you connect the MINI's antenna plug to your new radio. (Crutchfield includes these installation parts free with most orders, along with our step-by-step instructions for your MINI Cooper.)
Installation Note: The accessory power wire in the wire harness isn’t contained in the molded connector — it’s just a bare wire, so you can either tap into the accessory power wire behind the dash or run a wire over to the MINI’s fuse box.
Harman Kardon system
The Harman Kardon system adds an amplifier that lives in the cargo area under the right side of the floorboard. You can replace the speakers in the Harman Kardon system, but if you want to install a new car stereo, you'll have to run speaker wire from the new receiver to each speaker location, bypassing the factory amplifier.
Steering Wheel Audio Controls
The only significant issue with the MINI’s receiver installation is integrating the car’s remote steering column controls with the new receiver’s internal functions. You’ll have to access a wire inside the steering column, so it’s not a simple installation. We recommend a PAC adapter kit for this MINI.
|MINI Cooper door with tweeter/woofer combo (Crutchfield Research Photo)|
Replacing Your Factory Speakers
Tools: You'll want to have these tools handy to install new speakers — just a Phillips-head screwdriver, a flat-head screwdriver, a T30 Torx driver, a 7mm socket wrench and extension, a drill with a 1/8" bit, a wire stripper, and a crimp tool and crimp caps.
|MINI Cooper door with speakers exposed (Crutchfield Research Photo)|
Front doors: The MINI’s front door speaker system is a split-location configuration, with low-mid cones placed at the bottom of the doors, while highs are produced by tweeters placed at the top of the door panel, adjacent to the door’s latch.
If you decide to install aftermarket tweeters, you may have to fabricate new mounting brackets. The tweeter opening is oddly shaped, and making a new bracket will require a little ingenuity.
|Closeup of factory tweeter (Crutchfield Research Photo)|
You’ll have to remove the door arm rest and the door panel to get to the tweeter location, and you’ll have to cut off the original molded speaker connectors and attach the bare wire to the new tweeter. The good news is that a mounting bracket and wiring harness are available for the lower woofer location in your door. You can install a 6-1/2" or 5-1/4" speaker down there or, even better, pick out a nice set of component speakers. You'll have to drill new screw holes in the doors in order to install the mounting brackets, so take care not to damage the window or window mechanism when you're drilling.
|Closeup of factory woofer in door (Crutchfield Research Photo)|
Rear side panels: Rear speaker replacement is easier, although you will still have to apply a degree of care. You’ll have to remove the rear seat cushion, along with all four of the child restraint covers, to get to the 6"x9" factory speakers.
|Factory 6"x9" speakers in rear side panels (Crutchfield Research Photo)|
Then, carefully lift the side panel gasket, and pry away the top and bottom edges of the side panel until it is entirely free of its retaining clips, and lift it out of the way. Once you have the panel off, remove the speaker screws, lift the speaker off its bracket, and disconnect the wire harness.
|Factory 6"x9" speaker (Crutchfield Research Photo)|
You can install a nice set of 6"x9" speakers back there, or a set of 6-1/2" or 5-1/4" speakers will go right in those openings with the help of mounting brackets and wiring harnesses (supplied by Crutchfield).
Harman Kardon system
The MINI’s factory premium system offers a Harman Kardon receiver/amplification package, mated to an integrated multi-wire harness. If you are only intending to replace the speaker system, the speaker configuration is the same as the standard system. However, no wiring harnesses are available for the MINI so you have to cut off the factory plug wherever you replace a speaker. Simply follow the instructions on the Crutchfield MasterSheet, and you should be good to go.
If you choose to install a new car stereo, you will have to bypass the original wiring harness and amplification by running new wires from the stereo to the front and rear speakers.
Digital Signal Processor
If modifying your ride just isn't in your DNA and your car doesn't have a factory amp, the Helix PP50DSP can make a dramatic improvement in the sound of the factory system. It works like this: you buy the processor, along with a vehicle-specific cable and a plug-in powered sub. The cable plugs into your factory radio's plug, connecting the processor/amp to your factory speakers. Next, go to Helix's site, download your vehicle's audio parameters onto a microSD card, then load that info into the amp/processor. The PP50DSP is now ready to use equalization and time alignment to make your factory speakers sound great. Add in the bass from the optional Helix sub, and you've got a total system upgrade with minimal work.
You'll find iPod interfaces designed to integrate with the factory radio in the MINI Cooper, even with the Harman Kardon system. Some of the interfaces work with the DSP radio, some work with the non-DSP version.
We don't recommend installing a remote start system at this time, but installing an outboard security system is not too tough in this car. We offer Python and Code Alarm systems that you can install, but we always recommend going to a professional if you haven't installed a car security system before.
A homepage for your vehicle
Tell us about your vehicle, and you'll be able to see:
New to Crutchfield? Here are 3 things we want you to know about us.
Custom Car Showroom