Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Application Guide: This Q-Form kick panel fits 1995-96 Chevrolet
Cavalier and Pontiac Sunfire sedans and coupes. It will not fit the convertible.
- Color matched to interior of your
- Molded in one piece for factory
- Speakers positioned and angled for
optimum stereo staging and imaging
- Equalized path lengths reduce
right/left volume bias
Installation: These Q-forms are installed using the
hardware from the factory kick panels in addition to the hardware supplied with
the panels. Mounting speakers requires cutting out mounting holes in the designated areas of
the plastic Q-form. The tweeter can be flush or surface mounted. The tweeter on
this panel is mounted low, so no interference with factory equipment (parking
brake, etc) should be likely.
Note: Installing these Q-forms requires you to cut the factory
Installation tools required: hole saw (can also use air saw or keyhole
saw), drill, screwdriver.
Estimated Installation time: 2 hours (per the manufacturer)
Speaker Fit Notes: This Q-Form will fit most 5-1/4" component speaker
systems. Giving exact mounting depths is not
possible since it will depend to some extent on the space available behind the
factory kick panel, which can vary; however, the minimum flush mount
depth is .75" for the tweeter and 2.5" for the woofer/mid bass
component. According to the manufacturer,
the maximum allowable speaker depth is 4".
You can mount a tweeter with a maximum diameter of 2.34" and a
midrange/midbass with a diameter size ranging from 3 1/2" to 5 1/4".
The maximum frame width/diameter allowable for the midrange/bass driver is
6.3", so a few 6-1/2" units may fit. Our database
contains information relating to cutout requirements, frame width, and mounting
depth for all of our speakers, so please check with a Crutchfield sales advisor
before ordering if you wish to use 6-1/2" speakers in these kick panels.