Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Overview: This board mount kit is designed to work
specifically with the Polaroid XS100 and XS80 Action Cameras. The kit lets you mount the camera onto
surf board, snow board, skateboard, or other similar boards. The package
consists of the mount assembly, which attaches to the board, along with various
mounts that fasten to the camera. Several 3M dual-sided adhesive pads are
included to secure the mount's components. A security string
is included to tether the camera to the secure mount.
Mounting: The board mount assembly can be used on flat or
near flat surfaces, such as those found on various boards. The assembly can be
secured to the board using the supplied 3M dual-sided adhesive pad. For extra
security, or if the adhesive pad isn't satisfactory, you can use straps up to
3/4" wide (straps not included) to strap the mount assembly to the board.
A strap anchor (with an included adhesive pad) is included to help keep the
strap from slipping. Once mounted, the board mount arm can be rotated 360° and
the arm raised and lowered for the best aiming and positioning.
Camera Mounts: There are two mounts for the Polaroid Action
Cameras that work with the board mount assembly. One mount slides and locks onto
the bottom of the camera, while the other is equipped with a screw that can be
used with the tripod socket on the bottom of the camera. Both camera mounts fit
onto the board mount arm and will allow you to tilt the camera forward or
backward for best positioning.
Secure Mount: The board mount kit includes the Secure Mount
and security string to tether the camera to the board. The secure mount fits
into a cutout in the base of the board mount assembly, and attaches to the board
with the supplied 3M adhesive pad. The security string attaches to the secure
mount and the camera to prevent loss in case the camera is knocked off of the