Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Inputs and Outputs
Display: This EQ uses a flip
down, detachable multi-color display. The display shows an 11-band spectrum analyzer
using white, green, and blue colors. Amber indicators show the EQ pattern selected.
There are 11 selectable patterns:
EQ Presets: Pressing the EQ
button for over one second sets the EQ to flat. Presets are:
Equalizer Adjustment: The center
frequencies are 60Hz, 120Hz, 250Hz, 380Hz, 500Hz, 750Hz, 1kHz, 2kHz, 4kHz, 8kHz and 16kHz.
Each of these frequencies can be raised or lowered in 2dB steps by +/-12dB.
The built in menu
system which allows you to set the following:
- Fader: You can fade between the
front and rear outputs (the sub out is non-fading),
- High Pass Filter:
settings for the Front and/or Rear RCA Outputs. Can be set to Off (pass
through); 40Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz, 180Hz or 220Hz. (the slope is
- Low Pass Filter: For the subwoofer
(non-fading) output. Can be set to Off (pass through), 50Hz, 80Hz, or 120Hz (the slope is
- Subwoofer Preout Level: You can
adjust the output level of the non-fading preamp outputs between -80 to +10dB.
- Analyzer Level: You can set the
relative level of the spectrum analyzer display between 0-10.
- LCD Contrast Level: You can
increase or decrease the contrast of the menu display on a scale of 0-10. This does not
effect the spectrum analyzer display, it simply adjusts the contrast of
the menu portion of the display.
- Rear/Front Output Boost: Changes
the preamp output level of the front and rear RCA outputs to High (4V) or Low (1V) in case
the amplifiers being used with the unit can not accept a 4V input.
Input Sensitivity Adjustment: You
can adjust the input sensitivity of the unit (based on the source unit's output) from 1 to
4 volts using a small screw behind the faceplate.
Size: This is a full DIN-sized
component that can either be used in a dash which accommodates an additional full size
equalizer or which can be mounted under the dash using an optional underdash mount.
||ISO-DIN (I, J)
Wiring: The harness which comes
with this unit has:
- Black wire for ground
- Orange illumination wire (when connected will dim
display when the vehicle's lights are turned on).
- Yellow constant power wire
- Blue/white remote turn on wire
Inputs and Outputs
- 1 pair RCA preamp inputs
- 1 pair Front RCA preamp outputs
- 1 pair Rear RCA preamp outputs
- 1 pair Non Fading (Subwoofer) RCA preamp outputs