Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Full-Motion Design: The Sanus Premium Series VLFVLF525
full-motion, wall-mount bracket provides a 3-points of movement for an optimal
viewing position. The VLFVLF525 extends from the wall (3.625"-25"), tilts up/down
(+5°/-15°), and swivels left or right (+/-90°) for easy viewing anywhere in the
TV Capacity: The Sanus Premium Series VLFVLF525 wall-mount
bracket is designed to support flat-panel TVs from 51" to 70", weighing up to
VESA Bolt Pattern: The VLFVLF525 full-motion, wall-mount
bracket accommodates a horizontal hole spacing on back of the TV of 300mm-700mm
and a vertical hole spacing of 200mm-400mm. The Sanus VLFVLF525 comes with M4, M5,
M6, and M8 size bolts of differing lengths to mount the bracket to your TV. It
will accommodate the following VESA hole patterns in accordance with industry
standards set by the Video Electronics Standards Association:
- 300mm x 200mm
- 300mm x 300mm
- 400mm x 300mm
- 400mm x 400mm
- 500mm x 300mm
- 500mm x 400mm
- 600mm x 400mm
- 700mm x 400mm
Note: Additional hardware may be required for your specific
model of TV. For example; shorter or longer screws, thicker or slimmer
washers or spacers. These additional accessories can often be found at your
local hardware store.
Construction: The bracket is constructed of heavy-gauge
steel and high-impact plastic with a durable powder-coated black finish.
Perfect Positioning: The TV brackets and arm assembly let
your television slide from side-to-side on the wall-mount plate for perfect
positioning of the TV on your wall. There are also two level adjustment screws
on the TV bracket to raise or lower (+/-3°) the sides of the TV.
Note: The wall plate must be mounted to wall studs or
anchored to a brick, block, or concrete wall using the supplied lag bolts
(and wall-anchors). The slots in the wall plate can accommodate wall studs
16" and 24" on center.
Safety Tabs: Once the wall plate is anchored to the wall
studs, the arm assembly can be hooked into the wall bracket. An integrated
safety tab on the TV bracket provides a safe and easy connection to the wall
bracket you can hear. The TV brackets are then attached to the back of your
television and then mounted to the assembly arm; a safety knob & tab secures it
Cable Management: An in-arm cable management channel
protects and conceals cables the length of the arm for a clean appearance, while
decorative covers conceal assembly and mounting hardware of the wall-plate for a
Installation Tools: The following tools are recommended for
mounting the VLFVLF525:
- Tape measure
- Stud finder/level (included)
- 7/32 Drill bit (for wood stud)
- 3/8" Drill bit (for masonry)
- 1/2" Socket wrench
- Screw driver
- Horizontal TV Bracket:
- Width = 29.5625"
- Height = 2.25"
- Depth = 1.25"
- Vertical TV Bracket:
- Width = 4.5"
- Height = 19.0625"
- Depth = 0.9375"
- Arm Assembly (retracted):
- Width = 14.9375"
- Height = 15.75"
- Depth = 2.1875"
- Wall Plate:
- Width = 30.875"
- Height = 15.75"
- Depth = 2.625"