Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Ceiling Mount: The Sanus VisionMount MC1A full-motion ceiling mount allows
you to mount a medium-sized flat-panel TV in places where wall mounting is
difficult or not possible. This mount can be used for corner placement as well.
It is recommended for 23" to 40" flat panel TVs or monitors up to 70 pounds.
Construction: The MC1A is made of rigid extruded aluminum with a
durable anodized finish for a high-tech look that compliments your home theater
VESA-compatible Mounting Bracket: The MC1A's mounting
bracket can accommodate VESA 75
(75mm x 75mm), VESA 100 (100mm x 100mm), VESA 200 (200mm x 200mm), and VESA 200 x 100.
The mounting bracket comes with M4, M5, M6, and M8 mounting hardware in different lengths to accommodate most TVs. For TVs with curved back panels, a variety of spacers is provided for a secure fit.
Note: Additional hardware may be required for your specific
model of TV. For example; shorter or longer screws, thicker or slimmer
washers or spacers. These additional accessories can often be found at your
local hardware store.
Adjustable Height: The unit allows you to adjust the height of the TV
for perfect positioning. You can raise or lower the TV in a range of
Virtual Axis 3D: The cup-shaped faceplate design allows you to
effortlessly tilt or
swivel the TV up to 15° in any direction without the use of tools. A single knob
allows you to tighten the faceplate in the position you desire.
Wire Channel: The back of the pillar assembly contains a built-in wire
management system to protect and conceal cables. A plastic cover is included to
cover the wire channel for a finished look.
Required Tools: Installation of the MC1A requires the following tools:
- Phillips-head screwdriver
- Socket wrench with 1/2" socket
- Drill with 7/32" drill bit
- Electronic stud finder
- Overall: Width = 9.135", H = 21", D = 5.125"
- Pillar Assembly: Diameter = 5.181", Height = 18.375"
- Large VESA Plate: Width = 9.135", Height = 9.351", Depth = 0.909"