Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features

Overview: The enclosure is a two piece unit consisting of a enclosure made of 5/8" MDF and a "doeskin" colored plastic fascia. The fascia is colored to match the "doeskin" interior found in some 82'-91' Chevy Camaros, Pontiac Trans Ams and Pontiac Firebirds.

Wiring: There are two sets of nickel-plated 5-way binding posts (with plastic wire retention nuts) mounted on the rear of the enclosure. The wires supplied to connect the terminal cups to the woofers are terminated at each end with 0.205" female quick slides.

Installation Note: Run speaker wires from amplifier to enclosure. Place enclosure in rear storage well (between rear wheel wells), and permanently secure the enclosure to the vehicle (see note below). Place plastic fascia on box. Connect speaker wire between woofers and terminals. Place woofers on top of   fascia. Run screws through woofers, fascia, and into box. Press grills into fascia.

Mounting: For sonic and safety purposes, Ai Research recommends permanently securing the enclosure to the vehicle. No mounting brackets are included, so, to permanently attach the enclosure to the vehicle, a bracket kit (item 125B702KIT) will be needed or brackets and screws may be purchased from a hardware store. Bracket mounting requires drilling and screwing into the vehicle and enclosure.