Overview: The Sanus VisionMount VLT14 Super Slim tilting-mount places 37"-65" TVs just 0.875" from the wall, yet still allows up to 10° of tilting capability. The VLT14 also
offers additional exclusive features that make it incredibly easy to install and
use. The VLT14 features the revolutionary Adjustable Virtual Axis technology,
which allows tilt tension to be adjusted to compensate for a variety of TV
depths. ClickStand technology holds the TV away from the wall for easy cable
access without having to remove the TV from the mount.
Compatibility: The VLT14universal wall-mount bracket is designed to fit flat-panel
plasma and LCD monitors from 37" to 65". The TV can have a maximum
weight of 130 pounds.
Note: Wall plate mounting holes are designed to accommodate 16" or
24" on-center studs.
Construction: The bracket is
constructed of heavy-gauge steel and high-impact plastic with a durable
powder-coated black finish.
Super Slim Design: This super slim tilting mount sits just .875" from
wall to complement the sleek look of ultra-thin flat-panel TVs.
Mounting: The wall plate must be mounted to wall studs or anchored to a brick, block, or concrete
wall using the supplied lag bolts. The slots in the wall plate can accommodate a
variety of stud spacing, allowing you to easily mount the TV to wall studs that
are 16" or 24" on center. Once the wall plate is anchored to the wall studs and
the monitor brackets (with the TV attached) are hooked onto the wall plate, the
TV can slide left or right, allowing you to center the TV on the wall. After
the TV is secured, it will be held approximately 0.875" from the wall.
Note: Each monitor bracket has
multiple bolt holes and can accommodate vertical hole
spacing (on the back of the TV) up to 20.0625" (410mm). Since the
monitor brackets can slide on the wall plate, the horizontal hole spacing on the
back of the TV can range from 5.75" (147mm)
to 31.675" (804mm).
Steel Stud Mounting: If you wish to mount this Sanus wall mount in a
building with steel stud walls, you will need the Sanus SSMK1 Steel Stud
Mounting Kit (051SSMK1). Steel stud walls are typically found in commercial applications,
such as office buildings, warehouses, and condominiums.
Mounting Hardware: The VLT14
comes with M4, M5, M6, and M8 bolts to mount the monitor brackets to your TV.
VESA Compatible: Given the mounting
bracket's range of motion, it will accommodate the VESA 200 x 100, 200 x 200,
300 x 200, 400 x 200, 500 x 200, 300 x 300, 400 x 300, 400 x 400, 500 x 400, 600
x 400, & 800 x 400 mounting hole patterns in accordance with industry
standards set by the Video Electronics Standards Association.
Virtual Axis Technology: Once the TV is secured to
the wall, you can adjust the TV's angle. With the Virtual Axis fingertip tilt
system, the TV can tilt 10° down, and you can lock
the position by simply tightening a knob on each monitor bracket.
ClickStand: The VLT14's ClickStand feature allows you to tilt
the bottom of the TV outward and hold it there, giving you easy access to the
back panel for connecting cables. Once all the cables have been plugged in, you
can release the ClickStand and securely lock the TV into position on the wall
Quick Release Tabs: Convenient quick-release tabs stay hidden behind
your mounted TV, and easily pull down to unlock it from wall plate for cable
Installation Tools: The following tools are recommended for
mounting the VLT14:
- Stud finder
- Phillips-head screwdriver
- Electric drill
- Drill bits: 7/32" (wood studs) and 3/8" (masonry)
- Wrench or ratchet and socket: 1/2"
W = 32.5",
H = 3.75", D = 0.4375"
Monitor Brackets: W = 3.5", H
= 17.25", D = 0.75"