Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Features
Enclosure Compatibility
Features
Curvilinear Aluminum Cone: The
curvilinear aluminum cone is lightweight and extremely
rigid for low distortion and superior bass response.
High-roll Butyl Surround:
The high-roll butyl surround damps cone resonance and ensures longevity.
Cast-Aluminum Basket:
The non-resonant cast aluminum basket ensures perfect alignment of the speaker's
moving parts.
Flat
Uniform-roll Spider: The spider design
provides maximum control over cone motion at the limits of the speaker's
excursion, and reduces even-order harmonic distortion compared to cupped
spiders.
Vented Pole
Piece: A flared, polished and vented
pole piece is used to provide optimum cooling of the voice coil and minimize
turbulence.
1.5"
4-layer Voice Coil and Stacked Magnets:
The 1.5" 4-layer voice coil and stacked magnets provide high motor force
and room for ultra-long excursion.
Gold-plated
5-way Binding Posts: The gold-plated
5-way binding posts will accept pin connectors, spade connectors, banana plugs,
dual banana plugs, and bare wire.
Enclosure
Compatibility
Recommended Sealed Box
Volume: Infinity recommends a sealed enclosure with an internal volume
of 0.6 cu/ft.
Recommended Ported Box
Volume: Infinity recommends a ported enclosure with an internal volume
of 1.0 cu/ft. One 3" diameter x 10.4" long port should be used with a
1.0 cu/ft enclosure.
Recommended Sealed Bandpass Box Volume: Infinity
recommends a bandpass enclosure with an internal volume of 0.95 cu/ft. The 0.95
cu/ft enclosure should have a sealed chamber volume of 0.6 cu/ft and a ported
chamber volume of 0.35 cu/ft. One 3" diameter x 10.04" long port
should be used in the ported chamber.
Free-air
Mounting: In
addition to being compatible with sealed, ported and bandpass enclosures, the
woofer can be used in free-air applications. A free-air subwoofer is
designed to be mounted on a baffle board, which separates two areas of the
vehicle. For instance, you could mount this woofer to a board
attached to the rear deck or placed in the trunk against the rear seat. The
trunk acts as the enclosure housing the subwoofer.