Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
(Wide Range Amplifier Technology): This
technology uses low-negative-feedback circuit topology for accurate signal
reproduction, improved dynamic signal-to-noise ratio, and better delivery of
12V Turn-On Trigger: When the 12V Trigger
input jack on the back of this unit is connected to the 12V Trigger output jack
of a compatible Onkyo amplifier or preamplifier,> this
unit will automatically go into standby mode when the amplifier or preamplifier
is switched to standby and turn on when the amplifier or preamplifier is turned
on. Note: The Trigger switch on this unit must be in the 12V Trigger
position for this feature to work.
Auto Power On/Off: When
the Trigger switch is in the Audio position, this unit turns on automatically
when a signal is supplied to the Audio In jacks. If no signal is supplied to the
Audio In jacks for more than 4 minutes, this unit will go into standby mode.
Input Level Adjustment: The Input
Level control on the rear panel allows you to adjust the input level of the
signal from the Audio In RCA jacks.
Audio In/Out Link Function: The
signal supplied to the Audio In jacks is passed through the Audio Out jacks.
When used as a 2-channel amplifier in a multi-room configuration, you can
connect several M-282s to enjoy the same source in several rooms.
- Power Button: Turns
unit On or Off
- Standby/On LED: The LED
glows orange when the unit is on and red when the unit is in standby mode
- Input Level Control:
This rotary knob allows you to adjust
the input level of the signal from the Audio In RCA jacks>
- Trigger Switch: Can be set to
Audio, 12V Trigger, or Off
- Audio Input/Output:
Gold-plated stereo RCA jacks
- 12V Trigger In: One
1/8" jack for use with compatible Onkyo components
Left and right binding post outputs (collar prevents use of spade lugs, so
they are not 5-way binding posts)
- AC Inlet: AC
jack for use with supplied AC power cord
- Power Output: 10>0
watts per channel minimum RMS into 8 ohms (20 Hz to 20 kHz with no more than
0.08% THD); >125> watts per channel minimum RMS
into 6 ohms (1 kHz with no more than 0.1% THD)