Features
Controls And Indicators
Connections
Specifications
Features
Overview: The
Panamax MAX 7500-PRO Home Theater Power Management Center has been specifically
engineered to improve the performance and life expectancy of your home theater
equipment. The combination of its sophisticated power conditioning and power
protection has resulted in an audio/video power center that meets the power
quality needs for an entire entertainment system. At the heart of the MAX
7500-PRO is an advanced power filtration system featuring a 720VA isolation
transformer, that provides power for digital source components and displays. In
addition, any noise generated by digital source components is isolated and
prevented from reaching key audio or video components. The MAX 7500-PRO's ground
isolation feature mechanically interrupts ground loops, making the MAX 7500-PRO
especially useful for applications with unstable power or ground issues. IP
addressable, the MAX 7500-PRO is also ideal for multi-zone audio/video
whole-home automation and wherever remote diagnostics are needed. RS-232
communication comes standard with the unit and a TCP/IP card is optional. End
users can configure each outlet bank individually to customize for their home
theater system
11 AC Outlets: The Panamax MAX 7500-PRO features 1 front-panel "Always On"
AC outlet, 2 rear-panel "Always On" Linear Filtered outlets with voltage regulation,
2 rear-panel "Switched" Linear Filtered AC outlets with voltage regulation, 4 rear-panel "Switched" Linear Filtered
Isolated AC outlets
divided into two separate banks with voltage regulation, and
2 rear-panel
"Switched/Delayed High Current" AC outlets.
- 2 Always On Outlets:
Two "Always On" AC outlets are fed through separate Balanced Double L noise
filtration circuits. These circuits are designed to eliminate the AC
contamination that is most detrimental to the performance of analog or video
components like stereo receivers, VCRs or televisions.
- 2 Switched Outlets:
Two "Switched" AC outlets are fed through separate Balanced Double L noise
filtration circuits. These circuits are designed to eliminate the AC
contamination that is most detrimental to the performance of analog or video
components like stereo receivers, VCRs or televisions.
- 4 Switched/Isolated Outlets:
Four isolated/regulated "Switched" outlets divided into two separate banks
are fed power through the MAX 7500-PRO's isolation transformer. These
outlets should be used for digital components such as DVD players or display
devices like Plasma TVs or DLP projectors.
- 2 High Current Outlets:
The two individually-switched high-current outlets allow amplifiers and
powered subwoofers to work to their full potential. The High-Current Outlet
Bank provides clean, filtered power to amplifiers but has no current
limiting components to impede performance.
- 1 Gaming Outlet: The MAX 7500-PRO features a convenient
"Always On" AC outlet located on
the front-panel for connecting your gaming system temporarily.
Note: The MAX 7500-PRO features independent switches for each bank
of "Switched" outlets which allow you to configure these "Switched" outlets
as Always On.
Advanced Video Filtration With Ground Isolation:
The MAX 7500-PRO utilizes an advanced power filtration system featuring
a 720VA isolation transformer, that provides power for digital source components
and displays. In addition, any noise generated by digital source components is
isolated and prevented from reaching key audio or video components. The MAX
7500-PRO's ground isolation feature mechanically interrupts ground loops, making
the MAX 7500-PRO especially useful for applications with unstable power or
ground issues.
Voltage Regulation With Balanced Power: The MAX 7500-PRO features voltage regulation
which improves your audio/video system's performance and prolongs your
equipment's life by providing a consistent level of optimal power to all your
connected equipment.
Automatic/Visual Voltage Monitoring
Circuitry: Panamax's patent pending AVM circuitry continuously monitors the
incoming power as displayed on the unit's digital voltmeter. In case of an
under-voltage or an over-voltage, a flashing red lightning bolt will be displayed
in the voltmeter, and power to the connected equipment is automatically turned
off if either of these conditions is detected. When voltage returns to a safe
level, power to the equipment is automatically reconnected.
Cross-Contamination Reduction: The MAX 7500-PRO is designed to provide noise isolation between 5 isolated outlet banks including 2 high
current outlets so that any noise created by an A/V component can not contaminate the power going to equipment plugged into another outlet bank.
Power Sequencing: The MAX 7500-PRO features Power Sequencing to guard against blown fuses and potential
damaging speaker thump by automatically power outlets on and off in sequence.
This feature minimizes in rush current issues by allowing the components plugged
into the Switched Outlet Banks to power-up and stabilize before any amplifier
and powered subwoofers are turned on. This sequence is reversed during shutdown.
The amplifier and powered subwoofers turn off, their power supplies drain and
then the equipment plugged into the Switched Outlet Banks are turned off.
Voltage Sense Trigger Input/Output: The
MAX 7500-PRO voltage sense trigger input and output uses a standard 3.5mm (1/8") mini-mono plug. This
feature provides an On/Off trigger for the MAX 7500-PRO using a direct current
voltage signal. You can connect the DC Trigger Input to a remote trigger device
that uses a DC output to trigger a start-up/shutdown sequence. The DC Trigger
Output can be connected to a remote trigger device that uses a DC trigger input
to pass the MAX 7500-PRO's startup/shutdown sequence to an additional device.
Satellite HD TV Jacks: The MAX 7500-PRO features 2 pair of bidirectional F-type coaxial jacks for Satellite
TV. The clamping level of the MAX 7500-PRO's satellite protection circuitry is
25 volts, just 3 volts above the maximum operating voltage for Satellite TV. The
circuitry is shielded to prevent interference and has been optimized to have
less than 1dB of signal loss throughout the entire 950 MHz to 2.2 GHz
range.
Cable HD TV Jacks: The MAX 7500-PRO features 2 pair of bidirectional F-type coaxial jacks for Cable TV. The
clamping level of the MAX 7500-PRO's CATV protection circuitry is 1400
millivolts (1.4 volts). The circuitry is shielded to prevent interference and
has been optimized to have less than 1 dB of signal loss throughout the entire
frequency range up to 950 MHz.
Phone Jacks: The unit
features an RJ-11 input and two RJ-11 outputs for protecting your standard telephone or
pay-per-view lines. The Phone circuit is auto-resetting.
LAN Jacks: The MAX
7500-PRO is equipped with one RJ-45 LAN input and one RJ-45 LAN output on it
rear panel. The LAN protection
circuits are designed for 1-/100 baseT Ethernet lines.
Digital Voltmeter: The MAX 7500-PRO features a front-panel Digital
Voltmeter which monitors the voltage supplying your home theater equipment. If
line voltage drops below 90VAC, or if the line voltage exceeds 140VAC, the
display will turn off and the "unsafe voltage" indicator will flash indicating
and unsafe voltage condition.
Combination Meter: The MAX 7500-PRO features a front-pane
Combination Meter which shows the voltage the unit is proving to connected
components or the actual current draw (0-15A) of your system, giving a visual
reference as to how your system is functioning under a variety of conditions.
The display will flash if the unit is out of regulation.
Outlet Bank Power LEDs: Each bank of outlets feature a corresponding
Blue LED indicator. These LEDs indicate the status of the corresponding rear
panel outlets. The LED will be lit when the outlets are turned On. They will
flash during the startup and shutdown process.
Circuit Breaker: A circuit
breaker is located on the back panel of the MAX 7500-PRO. The circuit breaker
will trip only if the total current draw exceeds the maximum current rating
(15A). This means that collectively, all outlets must draw more than 15 amps
before the circuit breaker will trip.
Convenience Lamp: The convenience lamp included with the MAX 7500-PRO
plugs into the unit's front-panel USB port on its rear-panel. Its purpose is to
proved better visibility of other components and their A/V connection during
system setup.
Note: The unit's USB port is only designed to provide power to the
included USB light. Do not use this jack for other USB devices.
$5,000,000 Lifetime Connected
Equipment Warranty: Panamax will replace, pay to replace at fair market
value, or pay to repair, up to $5,000,000 of equipment that is damaged by an AC
surge while connected to a properly installed Panamax surge protector, if the
surge protector shows signs of surge damage or is operating outside of design
specifications. For coverage conditions and information on how to make a claim,
please see the warranty sheet.
Controls And Indicators
Front Panel:
- Power Button: Push-button power switch which activates
a turn-on or turn-off sequence for all outlets when depressed for two
seconds.
- Bank Status Indicators: Each AC outlet bank features an LED light
which indicates that the corresponding bank is on or off.
- Ground Isolation: This push-button switch controls the ground
connection of banks 3 and 4. When active these banks have balanced power
with an isolate ground connection. When not active these banks have balanced
power with a common ground reference.
- Voltmeter: Backlit meter which displays the incoming voltage
between 90-140 VAC.
- Combination Meter: This meter displays the regulated output
voltage (90-140 VAC) or displays the input current draw (1-15 Amps).
- Brightness Control/Meter Select: When in the full/locked
position, auto brightness is engaged, and the front panel display will dim
with the ambient light level. Rotating the knob to the right will increase
the display brightness, and left in decrease the display brightness.
Pressing this control button will toggle the display of the second meter
from "Volts Out" to "Amps In".
Rear Panel:
- 15A Circuit Breaker:
Opens in the event that equipment plugged into the unit draws too much
current. Also resets MAX 7500-PRO.
- Switch Settings: Two position slide switch which selects the use
of the five switches to configure the outlets for delayed or always-on
operation. Custom settings selects the stored configuration in non-volatile
memory for the outlets trigger source and delays.
- Outlet Delay Switches: Two-position slide switches which allow
you to configure each bank of switched outlets for delayed turn-on/turn-off
or always-on operation.
Connections
Front Panel:
- AC Outlet: Front panel "always on" outlet for gaming systems.
Rear Panel:
- Voltage Regulation Always On Bank 1: Two always on linear filtered outlets labeled
HD Cable and HD Satellite.
- Voltage Regulation Switched Bank 2: Two switched
outlets with linear filtration controlled by the front panel Power button or
the DC Trigger input labeled DVR and Digital Radio.
- Regulated And Isolated Switched Bank 3/4:
Four
switched outlets provide complete isolation
for digital source components such as DVD players or display devices like
plasma TVs or DLP projectors.. These outlet are completely isolated from the
rest of the system.
- High Current Delayed Switch Bank 5: Two delayed outlets
designed for high current components such a amplifiers and powered
subwoofers. The current available to connected equipment is not limited by
the noise filtration components.
- Voltage Sense Trigger Input: 3.5mm mono mini-plug which connects
to a remote trigger device that uses a DC output to trigger a
startup/shutdown sequence.
- Voltage Sense Trigger Output: 3.5mm mini-plug output which allows
the input signal to pass through the MAX 7500-PRO to control the
start-up/shutdown of an additional device.
- LAN Jacks:
One RJ-45 input and RJ-45 output for 10/100 baseT
Ethernet lines.
- Phone Jacks:
One RJ-11 input and two RJ-11 outputs for standard
telephone lines.
- Coaxial Jacks: 4 pairs
of bidirectional treaded female F-type coax terminals for HD Satellite
and HD Cable TV.
- Communication Interface: RS232 interface port for custom
configuration and/or home automation control.
- Lamp Receptacle: USB jack for the USB lamp included to illuminate
the rear panels or other components during setup.
- Ground Lug: Gold-plated binding post that provides a common
grounding point for equipment with separate ground leads.
- IEC Main Power Receptacle: The detachable 3-prong, 10' power cord
connects to this receptacle.
Specifications
AC Power:
- Line Voltage: 120VAC, 60Hz
- Maximum Current Rating: 15A
- UL 1449 Surge Suppression
Rating: 330V
- Protection Modes: L-N,
L-G, N-G
- Initial Clamping Level:
200V
- Energy Dissipation:
2670 Joules
- Peak Impulse Current: 162,000A
- EMI/RFI Noise Filtration:
- Banks 1, 2, 3, 4: 100dB, 100KHz-2MHz
- Bank 5 (High Current):
60dB, 100KHz-2MHz
- Over-voltage Shutoff
Threshold: 142V (+/-5VAC)
- Under-voltage Shutoff
Threshold: 90V (+/-2VAC)
DC Trigger Input:
- Jacks: 3.5mm (1/8")
mono mini-plug
- Voltage And Polarity: 3-24V DC, bidirectional
- Current Requirement: 4.5mA @ 3V, 58mA @ 24V
DC Trigger Output:
- Voltage: <12V
- Current: <400 mA
- Jacks: 3.5mm (1/8") mono mini-plug
- Delay Output: 10 seconds
USB Light:
- Voltage: 5VDC
- Current: 100mA
LAN Protection:
- Clamping Level:
8V +/-2V
- Connectors: RJ-45
- Wires Protected: 4 wires (1, 2, 3, and 6)
Telephone Protection:
- Clamping Level:
260V
- Capacitance: approximately
30pf
- Suppression Modes: metallic and longitudinal
- Connections: RJ-11
- Wires Protected: 2 wires (4&5)
Satellite TV Protection:
- Clamping Level:
25V
- Attenuation: <1 dB from 950MHz-2.05GHz (<2.4 dB @ 2.2GHz)
- Connections: Gold-plated female F-type
Cable TV Protection:
- Clamping Level:
1.4V
- Attenuation:
<1 dB up to 950 MHz
- Connections: Gold-plated female F-type
Weight: 36 lbs
