Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Woofers: The MTX RTL12X2D enclosure uses two 12" Road
Spider Plateau Venting: Heat from the voice coil is vented
through vents that surround the back of the spider. As the woofer travels back
and forth, cool air is pulled in and heated air is pushed out.
Asymmetrical Linear Drive System (ALDS): The Asymmetrical
Linear Drive System consists of a flat, progressive spider that improves
suspension and an extended pole piece that smoothes out the cone's linear
motion. The result is high output and low distortion.
Speaker Terminals: The single pair of spring post terminals
is mounted on the back of the enclosure and will accept pin connectors, single
or dual banana plugs, or bare wire up to 10 gauge.
2Ω Load: The two subwoofers are internally wired to present
a 2Ω load.
Break-in Period: The subwoofers' suspensions are stiff
out-of-the-box and require a break-in period in order to produce optimum low-bass
response. Approximately two weeks of daily playing will allow the suspension to
break-in and reach its optimum equilibrium. A broken-in subwoofer will exhibit
stronger bass performance, smoother response, and better low-bass extension.
5 Year Warranty Terms: This product carries a 5-Year Prorated
Warranty with the following terms:
- Years 1-2: Products found to be defective in materials
or workmanship during the first two years will be, at Mitek's option,
repaired or replaced by Mitek at no charge. The warranty period does not
renew, but continues on from the original date of purchase.
- Years 3-5: The purchase price of an item which becomes
defective after the first two years and prior to the end of the warranty
period will be prorated and credited toward the purchase of a new MTX
product. The amount of proration is determined by dividing the original
purchase price by the number of months in the warranty period (60), then
multiplying the result by the number of months remaining in the warranty