Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Universal TV Mounting Bracket: The
PFFP2b TV stand has a universal TV mounting bracket at the top of the pillar
that is designed to fit flat-panel plasma and LCD monitors from 30" to 50". Each
monitor bracket has multiple bolt holes and can accommodate vertical hole
spacing (on the back of the TV) up to 17.375" (444mm). Since the monitor brackets can
slide on the wall plate, the horizontal hole spacing on the back of the TV can
range from 1.75" to 26.5" (650mm). The pillar design allows you to adjust the height
of the bracket before you mount the TV.
Note: The stand
can support a TV with a maximum weight of 130 lbs.
VESA: Given the mounting
bracket's range of motion, it will accommodate the following VESA (Video
Electronics Standards Association) mounting patterns:
- 50 x 50mm
- 75 x 75mm
- 100 x 100mm
- 200 x 100mm
- 200 x 200mm
- 300 x 200mm
- 300 x 300mm
- 400 x 200mm
- 400 x 300mm
- 400 x 400mm
- 600 x 400mm
Virtual Axis Technology:
Once the TV is secured to the bracket, you can adjust the TV's angle. With the
Virtual Axis fingertip tilt system, the TV can tilt 12°
up or down, and you can lock the position by simply tightening a knob on each
Mounting Hardware: The PFFP2b
comes with the following size screws to mount your TV to the bracket: M4, M5,
M6, and M8.
Adjustable Shelves: The PFFP2b
features two adjustable, tempered glass shelves. With the TV bracket mounted in
the highest position, you can move the adjustable shelves up and down within a
range of approximately 2.5'. This range will vary depending on the size of the
TV. The large adjustable shelf is 29.938" wide and 16.938" deep. The small
adjustable shelf has the following dimensions: W=24.063", D=16.75".
Note: Each shelf can
support a component with a maximum weight of 50 lbs.
Bottom Shelf: The base of the
stand, which serves as the bottom shelf, is 43.25" wide and has a maximum
D=23.125". In front of the pillar, the shelf has a depth of 18.188".
Wire Management: The pillar has
an internal channel that keeps the wires and cords out of sight.