Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features

Installation: After a 10" x 7-3/8" cutout is made (either vertically or horizontally) the speaker is installed into the opening and held in place with the integral plastic bracket. The required depth to install the speaker is 3-1/4" from the mounting surface (this includes the thickness of the drywall). Behind the mounting surface there must be a 1-1/2" clearance on both ends of the speaker (along the short sides). The mounting wall material must be at least 3/8" thick for the mounting bracket to work.

Paintable: Both the frame and grille can be painted to match the ceiling. A plastic paint mask is included to protect the speaker from being painted as well.

Inputs: The speaker clips will accept bare wire up to 14 gauge.

IR Sensor Knockout: The speaker has a knockout molded into the speaker baffle that will accommodate a standard 1/2" diameter infrared (IR) sensor for an optional remote IR remote control system.

Placement: The HSi 275s can be mounted either vertically or horizontally. If mounted horizontally, each speaker should be turned so the tweeters are in the inside. If mounted vertically and the bottom edge is more than 66" above the floor, invert the speaker so the tweeter is below the woofer. The speakers should be mounted at least 12" away from a tube-TV to avoid interference with the picture.

Magnetic Grille: The grille is magnetically mounted for easy installation.

Optional Bracket: The NCB6 new-construction bracket (sold separately) can be used to simplify installation in new construction.