Cinespeed LCD Panel: Toshiba's REGZA Premium LCD Hi-Speed
Cinespeed panels offers a refresh rate of 60 Hz and fast response times of 8ms
or faster for an ultra sharp picture, especially when displaying fast-moving
action scenes, and demanding video games thanks to its 10-bit video processor. A wide 176-degree viewing angle
ensures that you can enjoy this TV from any seat in your room.
DynaLight Dynamic Back-Light Control: Toshiba's DynaLight
Back-Light Control utilizes advanced image and histogram processing to monitor
the brightness of each video frame, and adjust the backlight intensity
accordingly. This precision creates seamless transitions with deep blacks for
increased detail and depth analysis. This precise signal analysis allows for 256
levels of backlight control and can create a Dynamic Contrast that is 7 to 10
times that of the original panel contrast.
HDTV Tuner: The TV has
built-in over-the-air HDTV (ATSC) and Digital Cable (QAM) tuners, so you don't
separate set-top box to receive and decode over-the-air HDTV/SDTV
or unencrypted Digital Cable signals.
Native Resolution: The LCD television displays
all inputs at a resolution of 720p (1366 x 768). The HDMI inputs will accept
1080p, 1080i, 720p, 480p, 480i, VGA, SVGA and XGA signals while the component video inputs
will accept 1080i, 720p, 480p and 480i.
Inputs: The two HDMI inputs consist of a single type-A connector HDMI jack. The HDMI jacks can
accommodate a copy-protected digital connection (HDCP) from other devices (such as
digital set-top boxes) that have compatible interfaces. The HDMI jacks are compliant with the
E-EDID (Enhanced-Extended Display Identification) standards. If you want to connect a DVI-compatible device, you will
need an HDMI-to-DVI adapter cable. Since DVI does not carry audio signals, a
stereo 3.5mm audio input is provided for the HDMI 1 input. In addition to the
HDMI-to-DVI adapter cable, you will also need stereo audio cables. The HDMI 1
input can also be used to connect the TV to your PC along with the shared PC
stereo 3.5mm audio jack.
Note: The HDMI inputs
will accept 1080p, 1080i, 720p, 480p, and 480i video signals. The HDMI inputs
will support Linear PCM (sampling rate 32/44.1/48kHz) audio format.
Dual Component Video Inputs: The two ColorStream
HD Component video inputs will accept 1080i, 720p,
480p, and 480i signals.
CableClear DNR: Designed to optimize poor NTSC signals from antenna or cable, this noise
reduction system eliminates video noise ("snow") for a clean crisp image. This
system detects the quality of the incoming video signal, and automatically
applies the needed amount of video optimization.
Picture Size: When viewing a
source, you can choose one of the following picture sizes:
- Natural: image is
displayed close to its originally formatted proportion
- TheaterWide 1: the picture is
non-uniformly enlarged; the center of the picture remains close to its true
proportion, but the left and right edges are stretched wider to fill the
screen, used primarily with a 4:3 source
- TheaterWide 2: entire
picture is uniformly enlarged, used primarily with a letter box source
- TheaterWide 3: picture is
non-uniformly enlarged; the picture is stretched wider to fill the width of
the screen and stretched slightly taller, used primarily with letter box
programs with subtitles
- Full: mainly
designed for receiving a squeezed 4:3 signal (a 480i or 480p 16:9 program squeezed into
a 4:3 transmission), the picture is stretched wider to
fill the screen, but not taller, none of the picture is
- 4:3 HD: provides a 4:3 aspect ratio of a 720p, 1080i or
1080p signal; sidebars fill the empty vertical spaces while not distorting
the picture from its original size
- Native: when receiving a 720p, 1080i or 1080p signal
program, Native Mode restores the size of the picture by the 3-5% that is
generally lost during the normal over-scanning that occurs on traditional
sets. It also avoids unnecessary scaling of HD signals that can reduce
overall image resolution and picture quality.
- Dot-by-Dot: non-scaling display for VGA, SVGA, XGA,
WXGA and SXGA sources only
TheaterWide Scrolling: You can set separate scroll settings
for the Theater Wide 2 and TheaterWide 3 modes for each input. You can adjust
the scroll of the picture up and down as needed form -10 to +20.
Auto Aspect: When the auto aspect feature is turned on and
the TV receives a 480i signal, the picture size is automatically selected; a 4:3
signal is set to Natural, a 16:9 signal is set to Full, a 4:3 letterbox signal
is set to Theater Wide 2. If the signal's aspect is not defined, the Picture
Size defaults to the last manually chosen setting.
Picture Modes: You can select one of the following picture
modes for each input:
- Sports: bright and dynamic picture
- Standard: standard picture setting
- Movie: lower contrast for a darkened room
- PC: designed for viewing of PC tables and documents
- Preference: allows you to adjust and store contrast,
backlight, DynaLight, Dynamic Contrast, brightness, color, tint, and
Dynamic Contrast: When dynamic
contrast is set to On, the TV will detect when changes in picture quality that affect
the appearance of your contrast settings and adjust the video automatically.
Backlight Adjustment: The television features a Backlight Adjustment
function which lets you adjust the TV's screen backlight for better visibility.
Color Temperature: You can
change the quality of the picture by selecting from three preset color
temperatures - Cool (blueish), Medium (neutral), or Warm (reddish). You can also
adjust the levels of greens and blues in each preset temperature.
Cinema Mode: When viewing a DVD (3:2 pulldown processed)
from a DVD player connected to the composite, S-video, component, or HDMI inputs
on the TV, smoother motion can be obtained by setting the Cinema Mode to Film
instead of Video (available for 480i and 1080i signals.
Game Mode: You can use the Game Mode feature for shorter
frame delays when playing a video game requiring split-second timing between the
on-screen display and input from the controller such as music creation and
high-action games. This feature is more effective for 480i and 1080 input
MPEG Noise Reduction: The MPEG noise reduction feature allows you to reduce visible interference caused by MPEG
compression. You can choose High, Medium, Low, or
Static Gamma Adjustment: The Static Gamma feature allows you to adjust the levels of black in the picture. The adjustment range is with +/-5 from center.
The Thin-Line Speaker System utilizes a
slim speaker design with enhanced dynamic range. This eliminates the big
round speakers, without losing any of the big home theater sound.
Audio Adjustments: The television features independent bass and treble
controls which are adjustable. The television's built-in speakers
also can be balanced from left to right.
Dynamic Range Control: This dynamic range control feature
causes the ATSC dynamic range to be further compressed, allowing you to switch
from ATSC to analog broadcasts at the same dynamic range.
Lip-Sync Latency: Lip-Sync Latency activates an audio/video
display timing adjustment function that allows HDMI source devices to accurately
perform synchronization automatically.
Mute: The TV mutes the volume half-way when the Mute button is pressed once on the remote; when pressed a
second time the TV will mute the volume completely and when pressed a third time
the volume will resume as normal.
Digital Audio Output: An
optical digital output is provided to allow you to connect the unit to a
surround processor. The format can be set to Dolby
Digital or PCM.
PC Connection: You can view the
image from your PC on the TV screen by the unit's 15-pin D-sub RGB input or HDMI
input. The television supports the following PC resolutions through its PC
- VGA: 640 x 480 (60Hz)
- SVGA: 800 x 600 (60Hz)
- XGA: 1024 x 768 (60Hz)
- WXGA: 1280 x 768 (60Hz) or 1360 x 768 (60Hz)
- SXGA: 1280 x 1024 (60Hz)
RGB/PC Input: This connection
allows you to view the image of a personal computer on the TV screen. When
connecting the PC to the TV, you will need a 15-pin D-sub RGB computer cable and a PC
audio cable. The PC input shares the same 3.5mm audio input as the HDMI 1 input.
PC Settings: When your PC is
connected to the TV's 15-pin D-sub RGB terminal, you can use the TV's PC
Settings features to make adjustments to the image such as picture horizontal
and vertical position, clock phase (helps reduce noise and sharpens picture) and
sampling clock (helps reduce noise and minimize periodic vertical stripes
PC Audio: This function allows you to output the sound from
your PC through the TV's speakers via the PC stereo 3.5mm input on back of the TV.
Channel Browser: The
Channel Brower provides an easy navigation interface for all your channels and
inputs. The Channel Browser allows you to browse
and view channels by storing your recently viewed channels in channel history. You can surf back to channels/inputs you viewed prior to your current channel/input, and surf
forward from previous channels/inputs up to your current channel/input. Up to 32 previously
viewed channels/inputs can be stored in history.
Favorite Browser: The Favorites Browser function allows you
to quickly set up a favorite channels list so you can jump to a preferred
Channel Return: The Channel Return feature
allows you to switch between two channels without entering an actual channel
number each time.
SurfLock: The SurfLock feature temporarily memorizes one
channel under the Channel Return button, so you can return to that channel
quickly from any other channel.
Channel Label: A list of common channel labels for various
channels such as ABC, CBS, etc. are programmed into the TV. You are able to view
and assign these logos to your incoming stations. If the desired channel label
is not provide in the list, you will be able to manually enter/edit labels using
the on-screen software keyboard.
Input Label: You can label each video input source according to the
type of device you connected to each source, from the following preset list of
labels - Audio Receiver, Cable, Compact Disc, DTV, DVD, Game Console, HDMI
Switch, Laser Disc, Satellite/DSS, VCR, Video Recorder or Hide (hides an unused
preset). The PC Input can only be labeled Game Console or hidden.
Closed Captions: The TVs closed
caption mode has two options:
- Captions: an on-screen
display of the dialog, narration, and sound effects of TV programs and video
that are closed captioned
- Text: an on-screen display
of information not related tot the current program, such as weather or stock
data when provided by individual stations
Digital CC: You can customize
the closed caption display characteristics by changing the background color,
text size, type, edge, and color.
Parental Control: Some TV programs and movies include signals that
classify the content of the program (violence, dialogue, language, etc). The
V-Chip feature in this television detect the signals and blocks the programs
according to the ratings you select. Your rating setting is protected by a
custom-user 4-digit password.
Channel Block: With the Channels Block feature, you can
block specific channels.
Input Lock: You can sue the Input Lock feature to lock the
video inputs (Video 1, Video 2, Component 1, Componet 2, HDMI 1, HDMI 2, and PC) and channels 3 and 4.
You will not be able to view the input sources or channels until you unlock the
Control Panel Lock: You can lock the control panel to
prevent your settings from being changed accidentally.
GameTimer: You can use the GameTimer to set a time limit for
playing a video game from 30 to 120 minutes. When the GameTimer expires, the TV
enters Input Lock mode and locks out the input source for the video game device.
Sleep Timer: You can set the sleep timer to turn off the
television after a set length of time between 10 minutes and 180 minutes in 10
Last Mode Memory: If the power
is cut off while you are viewing the TV, the Last Mode Memory feature
automatically turns on the TV when the power is re-supplied.
Note: You should unplug the TV's
power cord if it is probable that you will be away from the TV for an
extended period of time after the power is restored.
Auto Power Off: In ANT mode the
TV will automatically turn itself off after approximately 15 minutes if it is
turned to a vacant channel or a station that completes it broadcast for the day.
Multi-brand Remote: The supplied remote is
pre-programmed to operate this unit and a number of functions on many other
brand components; including cable boxes, satellite receivers, DVD players
(including portables), VCRs, DVD/VCR combos, HTIBs (Home Theater In a Box), and
REGZA-LINK: REGZA-LINK allows control of external Toshiba
devices from the TV's remote control via HDMI connection. REGZA-LINK features TV
Auto Input Switch, TV Auto Power, and playback control for DVD players, as well
as Volume/Mute controls for your A/V receiver.
Pedestal Stand: The TV comes with a pedestal stand (assembly
required). The pedestal stand attaches to the television using four supplied
phillips-head machine screws.
Wall Mounting: The TV has four threaded inserts on the back
for use with an optional wall-mount bracket. The spacing of the mounting holes
is VESA 200 x 200 (200mm horizontal x 200mm vertical) in accordance with the
industry standards set by the Video Electronics Standards Association. The
threaded inserts require M6 (6mm) machine screws (not supplied).