Definitive Technology DI 6.5S Rough-in Brackets
Pre-construction brackets for Definitive Technology DI 6.5S in-wall speakers
Share this product:
Our take on the Definitive Technology DI 6.5S Rough-in Brackets
These pre-construction brackets are designed for Definitive Technology DI 6.5S in-wall speakers. Use the adjustable arms to attach the bracket to studs or joists before the drywall goes up.
What's in the box?
- 2 Metal in-wall mounting brackets
- 4 Metal mesh arms
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Overview: When planning speaker installations in new
construction many installers find it useful to install rough-in brackets onto
wall studs or ceiling joists so that the sheetrock contractor knows precisely
where to cut the appropriate size holes. The DI Series rough-in brackets were
custom designed from the ground up to be easy to install. The "arms" are metal
mesh and can easily be attached to wood or metal studs using nails, dry-wall
screws, or construction staples. The arms easily detach and can be positioned at
various points around the bracket to accommodate unusual stud/joist locations.
The mounting bracket is heavy gauge steel that will not bend or break with rough
handling and sloppy drywall cutting by subcontractors. The convenient wire tie
loop is scored to allow easy snap off once the speaker is installed.
Compatibility: The DI 6.5S rough in bracket is compatible
with Definitive Technology's 6.5" Disappearing In-Wall Loudspeaker (DI 6.5S).
Note: DI Rough-in Brackets are packaged two to a carton
(2 mounting brackets and 4 mounting arms). Mounting screws not supplied.
Metal Brackets: The mounting brackets are fabricated from
heavy duty painted stamped steel. There are no sharp metal edges to cut an
installer's hands and they are ultra rigid, so that when drywall is laid over
and cut the brackets will not bend or break. The mounting bracket requires a
7.375" x 7.375" square cutout.
Mounting Arms: The metal mesh mounting arms snap onto the
metal bracket in a variety of positions to cover almost any installation. The
wings can be attached with nails, staples or screws; and can be bent and easily
trimmed with tin snips. They are also thin enough to make stud notching simple.
The wire tie loop easily breaks away when the speaker is installed.
- Mounting Brackets: Width = 9.3125", Height = 9.3125",
Depth = 0.8125"
- Mounting Arms: Width = 12.4375", Height = 1.9375",
Depth = 0.5625"
- Overall Dimension: Width = 33.75", Height = 9.3125",
Depth = 0.8125"
- Cutout: Width = 7.375", Height = 7.375", Depth =
Review this product:
Thanks for taking the time to share your experiences about this product. Please
be sure to focus your comments on the product itself. Read our
Review Guidelines for more information.
For a more in-depth review and enhanced detailed information on the
Definitive Technology DI 6.5S Rough-in Brackets, please visit the Crutchfield website product
Get live, personalized service from an expert
Crutchfield Advisor: Hi there.
We're happy to answer questions or provide additional info about this item.
Advisors also available at 1-888-600-3963