About the Kenwood KSC-900CTR
Add Kenwood's KSC-900CTR powered center channel speaker to your mobile multimedia system for crisp, clear dialog. The speaker contains a 2-3/4" x 1-9/16" oval woofer and a 5/8" soft dome tweeter, and is easily installed, thanks to its slender profile and compact size. The hideaway amplifier powers the speaker with 20 watts RMS (35 peak).The KSC-900CTR comes with a mounting bracket and cables (RCA, speaker, and power).
Features:
- 2-3/4" x 1-9/16" oval woofer (pulp cone)
- 5/8" HyperNyl (nylon polymer) soft dome tweeter
- mounting bracket with detachable security system
- separate amplifier produces 20 watts RMS/35 watts peak
- frequency response 400-50,000 Hz
- signal-to-noise ratio 85 dB
- speaker dimensions: 5-9/16"W x 1-13/16"H x 1-9/16"D
- warranty: 1 year
What's in the box:
Kenwood KSC-900CTR owner's manual
- Center channel speaker
- Amplifier
- Wired bracket for mounting speaker (9' 8" wire attached)
- Mounting plate
- Amplifier wiring harness with 9' 8" wires
- 19' 6" Single (mono) RCA cable
- 9' 10" Extension for remote turn on lead
- 9' 10" Extension for power cable with in-line fuse
- 6 Mounting screws
- 2 Speed nuts
- 1 Lock washer
- Manual (English/German/French/Italian/Spanish/Dutch/Japanese)
- Warranty card
Customer reviews for Kenwood KSC-900CTR
Loading...
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kenwood KSC-900CTR
Product Research
Overview
Speaker
Amplifier
Mounting
Overview: This speaker system includes a center channel speaker and a mono amplifier for your car's audio/video system; it is designed to be used with a head unit or surround processor equipped with a mono center channel preamp output. Since most cars have no provision for mounting a center channel speaker, a mounting bracket is included. This item includes an amplifier and all the necessary wiring.
Speaker
Dimensions:
- Width: 5.501"
- Height: 1.782"
- Depth: 1.509"
Drivers:
- Tweeter: 16mm (5/8") Hypernyl (nylon polymer) dome
- Woofer: 70mm x 40mm (2-3/4" x 1-9/16") paper cone
Specifications:
- Frequency response: 300 Hz-70,000 Hz
- Rated power input: 20 watts RMS/35 watts peak
- Impedance: 4 ohms
Amplifier
Dimensions:
- Width: 6.134"
- Height: 1.585"
- Depth: 4.351"
Specifications:
- Power output: 20 watts RMS/35 watts peak (into 4 ohms)
- Frequency response: 400Hz - 50kHz
- Signal to noise ratio: 85 dB
- Input sensitivity: 0.2 volts - 5 volts
- Maximum current consumption: 2.4 Amps
- Fuse: 3-amp blade type
Input/Output: The signal input is a single female RCA connection. The power and speaker output wires share the same harness.
Mounting
Mounting: The mounting plate is designed to be installed using a self-adhesive backing, two self-tapping screws and two speed nuts. The plate is 3.547" wide and 3.603" deep. Once the mounting plate is installed, the mounting bracket can be bolted to the mounting plate. After the mounting bracket is in place, the speaker snaps onto the bracket. When connected to the bracket, the speaker can be positioned to lay flat against the mounting plate, or it can be positioned at any angle, up to 90 degrees, to the plate. The speaker can be detached and stored out of sight to prevent it from being stolen.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...