Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Compatibility: The enclosure's shape is made to fit the space behind the
driver's seat of 88-97' full-size Chevy and GMC standard cab trucks. The
enclosure is roughly wedge shaped with an extension protruding from the lower
left corner (extension designed to rest on center portion of cab floor). There
are two plastic feet on the bottom of the enclosure to stabilize it and prevent
the plastic fascia from making direct contact with the floor. Check Install
Guide for applicable vehicles.
Enclosure Type: This enclosure is made for use with woofers
designed for small sealed enclosures.
- Internal Volume:
- Speaker mounting height: 0.625"
- Maximum speaker frame diameter:
Cosmetics and Design: The enclosure is made of 1/2" particle board,
and it is finished with a molded plastic fascia that covers all but the back
panel of the enclosure. The plastic fascia has a wrinkled surface pattern. The
back panel is covered with medium gray/black box carpet. The friction fit grille
is made of a flexible black plastic mesh.
Input Terminals: Gold plated 5-way binding posts with plastic wire
Speaker Wire: The wire supplied to connect the terminal cup to the woofer
is terminated at both ends with 0.205" female quick slides. One conductor
has a black stripe on it's insulation (on the reviewed enclosure, the black
striped wire was connected to the negative terminal of the terminal cup).
Mounting: The enclosure is made to sit behind the driver's seat in the
above mentioned vehicles. For safety and sonic reasons, Ai Research recommends
permanently securing the enclosure to the vehicle. NO MOUNTING BRACKETS ARE
INCLUDED, so, to permanently attach the enclosure to the vehicle, a bracket kit
125B702KIT) will be needed or brackets and screws may be purchased from a
hardware store. Bracket mounting requires drilling and screwing into the vehicle