Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Overview: The SA69 fits many factory 6x9 speaker locations,
allowing you to mount select 5-1/4s and 6-1/2s in its round opening. There is
also a scored knockout for mounting a separate tweeter. (Please refer to the
Crutchfield Vehicle Selector to confirm fit in your vehicle.)
6-1/2 Speakers: The brackets have screw holes for the
standard 3-hole 6-1/2 pattern. If the 6-1/2 to be installed has a 4-hole
pattern, new holes will likely need to be drilled in the bracket.
5-1/4 Speakers: While a 5-1/4 speaker will mount easily
in this bracket given the bolt pattern, the frame of many 5-1/4s (about one
in three) is smaller than the opening in the bracket, making a 6-1/2 a better
fit. When using a 5-1/4, a speaker baffle might also be needed to seal the rear
of the speaker.
Tweeters: The knockouts for mounting separate tweeters have
several scored concentric circles, ranging from approximately 5/8" to 1-3/4".
By design, the tweeter plug is not easily removed, it will need to be cut out.
- Length: 9.32"
- Width: 6.45"
- Opening Diameter: 5.1"
- Bracket Thickness: 0.16"