Looking for car stereos?Start shopping
2001-05 Chrysler PT Cruiser
2001 • 2002 • 2003 • 2004 • 2005
2001 Chrysler PT Cruiser (Crutchfield Research Photo)
Way back in the 1930's, when most cars on the road still resembled "motor carriages," Chrysler introduced the Airflow, a streamlined machine that looked like something out of a Buck Rogers comic strip. The design was, alas, a little too 25th century for the car buying public. Sales were slow, and Chrysler quickly replaced it with something a bit more "normal-looking."
Early in the 21st century, though, Chrysler introduced its new PT Cruiser, a compact wagon that combined Airflow style with minivan utility in a package that was anything but "normal looking." This time, the risk paid off. In a world full of dull, grey sedans, the PT Cruiser's cheerful combination of retro form and modern function quickly attracted a large and loyal fan base. Today, the PT is one of those rare designs that still stands out, even after a decade-plus on the road. Perhaps the secret to aging gracefully is looking a little bit old to begin with.
Whether you're sticking with the stock look or, like many owners, adding your own custom touches, a PT Cruiser can be a pretty nifty way to go about your daily business. If you want your car to sound as nifty as it looks, the PT is a great platform for an aftermarket stereo system.
The PT was available with several different factory radio options. The base unit, familiar to anyone who's ever rented a PT at the airport, was an AM/FM/Cassette radio with six speakers. Upgraded AM/FM/Cassette/CD receivers were also available. In 2005, The PT Cruiser added optional Sirius satellite radio and Chrysler's UConnect system, which used the audio system as a hands-free, wireless link to cell phones. If your '05 is so equipped, you'll lose those features when you install an aftermarket stereo. Thankfully, there are aftermarket solutions.
The PT Cruiser factory radio with CD and cassette (Crutchfield Research Photo)
Replacing the factory stereo
Removing the PT Cruiser's stock radio isn't terribly difficult, but the process is a bit labor-intensive. You'll start by removing the four climate control knobs, which should come off with a firm, but gentle pull. Next, you'll use a panel tool to gently pry out the top of the power window control panel, which is located in the dash, between two HVAC vents. Disconnect that wiring harness, remove it, and remove the Phillips screw you'll see when you remove the panel.
Use your panel tool to carefully pry around the receiver trim panel until you release six retaining clips. With the receiver exposed, all you need to do is remove four Phillips screws, pull the radio out and disconnect it. Complete instructions can be found in the Crutchfield MasterSheet™ that’s included free with your Crutchfield stereo purchase.
PT Cruiser radio cavity (Crutchfield Research Photo)
There's obviously a lot of stuff going on in the PT's center stack, which means you won't have room for a big 4" double-DIN receiver. Perhaps it's all for the best. Accidentally lowering a rear window every time you took a swipe at a touchscreen receiver would soon grow tiresome. That still leaves you a wide selection of powerful 2" single-DIN CD receivers or, if you're travelling disc-free these days, digital media receivers.
Installing your new stereo is largely a matter of reversing the steps you took to remove the old one. Insert the factory DIN sleeve into the mounting bracket and secure it by bending the tabs. Connect the wiring adapter to the factory wiring harness and plug into the antenna lead. The mounting kit and wiring harness are included free with most stereos purchased from Crutchfield. We highly recommend testing the stereo before you re-install the dash panels.
Tools needed: Panel tool, Phillips screwdriver, small flat head screwdriver
Replacing the factory speakers
Front door speakers
The PT Cruiser's front doors house 6-3/4", 4-ohm speakers. These "oversized" speakers are found frequently in Chrysler and GM vehicles, so same-size aftermarket speakers are plentiful. You can also use an adapter bracket to install 5-1/4" or 6-1/2" speakers. The brackets are free with your Crutchfield speaker purchase, along with a Crutchfield MasterSheet that contains detailed, step-by-step instructions on how to remove and replace stereo equipment on your PT Cruiser.
Removing the originals involves removing the door panels, which is a relatively simple process on the PT Cruiser. You'll need a few tools and some patience, but it's totally doable.
The PT's door, with panel removed (Crutchfield Research Photo)
First, pry out the sail panels on the front windows and release two metal retaining clips. The wiring is strong enough to hold the panel, so let it hang there while you proceed. You'll need to remove one Phillips screw from behind the door release handle, another from the front edge of the door panel, and two more from the bottom edge of the door panel. Next, grab a Torx screwdriver and remove two Torx T30 screws from the door pull handle/armrest.
With all that done, you'll use your panel tool to pry out the bottom and sides of the door panel, releasing eight retaining clips in the process. Be careful as you're doing this, of course, and when you're done, lift the door panel straight up out of the slot. Gently pull the panel away from door to release the plastic clip from the door release rod. Disconnect the wiring harness (if equipped) and set the panel aside. Then, remove the three Phillips screws that secure the speaker, pull it out, and unhook the harness.
Now get your new speaker out of the box. Connect the speaker wiring adapter of the new speaker to your PT Cruiser's speaker harness. Secure the speaker (and adapter bracket, if needed) with the screws you just removed and test it out. If it sounds good, re-install the door panel by reversing the removal steps.
Tools needed: panel tool, Philips screwdriver, Torx T30 driver
The PT Cruiser has a pair of 4-ohm tweeters located in the dashboard. You'll need to remove the radio trim and the dash pad to access them, so if you really want to replace the tweeters, it would be easiest to do it while you already have the dash apart.
The PT Cruiser, dash removed to expose the corner speaker (Crutchfield Research Photo)
The bolt pattern for these tweeters is the same as a 3-1/2" speaker, but the actual cutout diameter is only 2-1/2". You'll need to expand the cutout diameter to get a 3-1/2" speaker to fit, which is probably a job for professional car stereo installers. Which brings us back to the phrase, "if you really want to replace the tweeters." Another option is to install aftermarket tweeters in this location. You'll need to fabricate a mounting bracket for the new tweeter, and our universal back strap can help with this. Again, this will take a little work, but it's much easier than trying to fit new 3-1/2" speakers.
Rear pillar speakers (wagon)
The PT wagon's rear speakers are 4-ohm 6"x8" models located in the rear pillars. A set of new 6"x8" speakers will fit nicely, as will a set 5-1/4" speakers, with help from the adapter brackets included free with your Crutchfield speaker purchase.
The PT's rear pillar speakers are easy to remove (Crutchfield Research Photo)
Removing the stock rear speakers is an uncomplicated procedure. Start by carefully prying out the top edge of the pillar trim panel/speaker grille to release four metal retaining clips that hold the panel in place. Next, remove the four Phillips screws securing the speaker. Some of those Phillips screws are difficult to reach, by the way, so be sure to grab a long Phillips screwdriver when you're in the toolbox.
Once that's done, pull out the speaker, disconnect it, and put it aside. From there, all you have to do is connect the wiring adapter on your new speaker to the PT's speaker harness. Secure the speaker with the same screws you removed and test it out. If it works, you're ready to button up the trim panel and start enjoying the sound.
Tools needed: panel tool, long and short Philips screwdrivers
Rear speakers (convertible)
In 2005, Chrysler added some fun and sun to the PT Cruiser line with a new convertible model. The drop-top was essentially identical to the wagon from the nose to the dashboard or so, so the instructions we've covered so far will take care of your receiver and front speaker installation needs. The rear speakers, however, are another thing entirely.
Getting to the convertible's rear speaker requires lots of disassembly (Crutchfield Research Photo)
In the convertible, the rear speakers are 6"x9" speakers, and they're located in the rear seat side panels. And they are tough to reach. Stock-size replacements will work, of course, and you can also use an adapter bracket to install 5-1/4" or 6-1/2" speakers. You'll need to remove the rear seat and several trim panels, though, plus there's a roll bar to deal with. Complete instructions for the 2005 ragtop are included in your Crutchfield MasterSheet, but this is not an easy job. If you're not comfortable with a big disassembly project, we'd suggest leaving this to a car audio installation professional.
Tools needed: panel tool, long and short Philips screwdrivers, Torx T50 driver, 13mm socket, 13/16" socket, ratchet and extension
Bass in your PT Cruiser
The JL Audio Stealthbox
If you're interested in adding big-time bass to your PT Cruiser wagon, there's plenty of room to work with in the rear cargo area. The space available for placing a subwoofer box measures 39" W x 18" H x 19"-24" D, so if you’re thinking about boxing up a good-sized set of component subs, you’re in luck. On the other hand, if you're interested in adding a reasonable amount of bass without losing an unreasonable percentage of your PT's cargo capacity, you can also add a more compact powered subwoofer. We offer several standalone units that will give you the thump you want without devouring the entire rear compartment.
For the best of both worlds, take a look at a JL Audio Stealthbox. This custom-designed solution contains one 10" JL audio subwoofer in a sealed enclosure that fits inside the driver's side cargo area trim panel. The sub gives you great low-end performance, but it doesn't compromise cargo space at all.
Please note that if your PT is equipped with the optional Mopar® sub, you'll need to purchase a standard side panel from the Chrysler parts department. Also, the Stealthbox will not fit in PT Cruisers equipped with OEM satellite radio, the optional cargo organizer or an air compressor/inflator kit.
The convertible's available trunk space is 36" W x 13" H x 27" D. We'd recommend a powered sub for this installation.
Q-Forms Kick Panel Pod
Kick panel speakers: A custom-fit Q-Forms Kick Panel Pod is another great way to improve your PT's sound. These pods mount in the kick panel areas in the front of the car. Available in Agate, Black or Brown, Q-Forms enclosures hold your speakers in an ideal position, angling them upward to maximize sound quality. Note: The Q-Forms do not come with pre-cut holes, so you must cut holes in order to install your component speakers in the enclosures. Installing the Q-Forms panel enclosures in your vehicle may require relocation of the parking brake pedal or other vehicle parts.
Helix PP50DSP sound processor: If you want to keep the factory stereo, but want better sound, Helix offers another option for vehicles without factory amplifiers. You can use their PP50DSP processor to make a dramatic improvement in the sound of your factory system. It works like this: you buy the processor, along with a vehicle-specific cable and a plug-in powered sub. The cable plugs into your factory radio's plug, connecting the processor/amp to your factory speakers. You then go to Helix's site to download the audio parameters for your vehicle on a microSD card, then load that info into the amp/processor. The PP50DSP is now ready to use equalization and time alignment to make your factory speakers sound great. Add in the bass from the Helix sub, and you've got a total system upgrade with minimal work.
Floor Mats: If you’ve ever owned a minivan of any kind, you don’t need us to remind you of what can happen when you hit the road carrying any combination of adults, kids, pets, and food. Floor mats and cargo mats from WeatherTech will help protect your floors from dirt, damage and discarded juice boxes. As for the seats, door panels, roof and everywhere else a scoop of ice cream can possibly land, we recommend WeatherTech’s TechCare car care products.
Security: If you're thinking about adding an alarm or remote start to your PT Cruiser, the FLCAN FlashLogic module is the place to start. It connects to your vehicle's databus interface, enabling communication with a wide variety of security systems. A Crutchfield Advisor can assist you in ordering all the equipment you need. If you don't have car audio and security installation experience, you should consider having this work done by a professional.
System building tips
The PT Cruiser has a lot of potential where the stereo system is concerned. As with any car stereo system, you can upgrade the components in stages, building it a piece at a time until you eventually realize your dream system.
The place to start in your PT Cruiser is up front, with either the front door speakers or the stereo. The speakers are fairly easy to to get to (as far as door speakers go) and there's plenty of room in the door for a wide range of replacments. Replacing the stereo with a new receiver will give you more power (for improved sound), plus added features like a USB input for your smartphone and Bluetooth connectivity for phone calls and streaming music.
Instead of standard coaxial speakers for the front doors, consider a set of component speakers, especially after you've replaced the stereo. Component speakers give you better imaging and more clarity in the music. You can mount the new tweeters in the dash or create a spot for them on the upper door panel. Also, add a powered subwoofer to get the bass you're missing.
If you've avoided replacing the rear speakers up to this point, now's the time. And since you'll have so much of the interior exposed, go ahead and run the wiring for a 4-channel amplifier, even if you don't actually add the amp yet. This is one of the best ways to plan ahead and keep the work required to a minimum.
Finish off your system with a 4-channel amp to power your speakers. This component is often that magic step that brings the music to life. The added power lets your speakers really open up and play music for you, bringing out details in the sound that you've never heard before.
This is only one approach you can use to build your stereo system. Keep in mind that there's hardly any wrong order. If adding that missing bass is your biggest priority, then go ahead and do that as your first step, then work on the speakers and stereo later. It's your car and your stereo. Have fun with it.
A homepage for your vehicle
Tell us about your vehicle, and you'll be able to see:
New to Crutchfield? Here are 3 things we want you to know about us.
Custom Car Showroom