Marine Rated
Display Features
Audio Section
Radio Functions
Disc Playback
Aux/USB/iPod Connectivity
Remote Control
Installation
Marine Rated
Marine Tested: The Clarion CMD7 Marine CD receiver has been
engineered and tested for use in the harsh marine environment. The receiver
meets or exceeds ASTM B117 Salt/Fog Exposure and ASTM D4329 UV Exposure
standards. The CMD7 offers full IPX5 tested and certified Water Intrusion
protection. The faceplate features a unique rubber gasket and door assembly
offering the internal components complete water protection. The unit features a
sealed stainless steel chassis, a front panel rubber gasket and drip shield over
the wire connections to keep water from dripping onto the internal circuits,
behind the faceplate and wire connections. The receiver also features a HumiSeal
coated PCB to protect against corrosion. This means the main circuit boards
feature a silicone coating to help resist the effects of humidity.
Display Features
Oversized Fold-Down Face: The CMD7
features an oversized fold-down face with a rubber surround so your CD-disc
stays protected behind the unit's marine rated face-plate. The front panel
mechanically folds down to load and eject CDs. The unit's face features a high
visibility 2-line display.
Note: The face-plate is not detachable.
Contrast: You can
set the contrast level between 1 and 10 for best display visibility.
Illumination Dimmer: The receiver's display automatically
dims to a preset brightness when the boats lights are turned on. The
wiring harness includes an orange/white lead that should be connected to the
boats light circuit in order for the dimmer feature to operate.
Screen Saver: This unit is provided with a Screen Saver
function which allows you to show various kinds of patterns and characters in
the operation status indication area of the display in a random order. You can
turn this function on or off. If the button operation is performed with the
screen saver function "On", the operation display corresponding to the button
operation is shown for about 30 seconds and then the display returns to the
screen saver display.
Audio Section
MOSFET Amplifier: The Clarion CMD7 is equipped with a MOSFET
amplifier. Compared to conventional power supplies, the MOSFET amplification
circuit is smaller and more efficient, and it delivers increased power with less
distortion and absolutely zero on/off switching noise. More power means louder
and cleaner music at higher volumes because you're not pushing the limits of the
amplification circuit.
CEA2006 Compliant: The power specifications for the CMD7 are
compliant with the CEA2006 Mobile Amplifier Power Testing and Measurement
standards from the Consumer Electronics Association (CEA). These standards were
developed as a way to equitably compare power specs from model to model and
between manufacturers. The power output specs for the CMD7 are as follows:
- CEA2006 Specs: 19 watts RMS x 4 channels (at 4 ohms,
20Hz-20kHz, 1% THD-N)
- Maximum Power Output: 45 watts x 4 channels (200 watts
total)
BeatEQ: In addition to providing 3 preset equalization
patterns (Bass Boost, Impact, and Excite), Clarion's BeatEQ lets you freely
customize the level and range of the bass, midrange and treble portions of each
pattern. You can tune the sound to your liking, depending on the category of
music, for a more fulfilling listening experience.
- Bass Boost: Bass is emphasized +/-3.
- Impact: Bass and treble are emphasized +/-3.
- Excite: Bass, midrange, and treble are emphasized +/-3.
- Custom: Adjusts the bass, midrange, and treble
independently +/-7.
- Bass: You can set the effected bass frequency to
60Hz, 80Hz, 100Hz, or 200Hz and the Q-factor to 1.0, 1.25, 1.5, or 2.0
- Midrange: You can set the effected midrange
frequency to 500Hz, 1.0kHz, 1.5kHz, or 2.0kHz and the Q-factor to 0.5, 0.75, 1.0,
or 1.25
- Treble: The effected treble frequency can be set to
10kHz, 12.5kHz, 15kHz, or 17.5kHz; the Q-factor is fixed
- Off (Flat): Bass, midrange, and treble are set to 0.
Magna Bass EX (Extend): The Magna Bass Extend feature does
not adjust the low frequencies like the normal sound adjustment function, but
emphasizes the deep bass frequencies to provide you with a dynamic sound. This
circuit boosts bass at an ultra-low frequency of about 50Hz, creating a rich,
deep, defined bass rather than the muddy, booming bass of a standard loudness
control. What is more, boost levels are dependent on the system volume,
resulting in balanced system response and dynamic bass reproduction.
4ch/2V Preamp Output: The Clarion CMD7 features 4ch/2V RCA
line level outputs (Front, Rear/SW). The unit's rear preamp outputs can be
configured as a dedicated non-fading RCA subwoofer output with a low-pass filter
and level control (+/-6).
Beep: The headunit provides an audible beep to confirm
button operation. This function can be turned On or Off.
Radio Functions
AM/FM Tuner: The CMD7 features a built-in AM/FM tuner with
U.S. and European tuning.
Tuning Modes: The built-in tuner offer 3 tuning modes -
Seek, Manual, and Preset.
Preset Tuning: The CMD7 provides 3 FM banks and 1 AM bank.
Each AM/FM bank can hold up to 6 station presets, proving you with 18 FM station
presets and 6 AM station presets. Stations can be stored manually or
automatically.
Preset Scan: Preset scan receives the stations stored in the
headunit's preset memory in order. This function is useful when searching for a
desired station in memory.
Satellite Radio Ready: There are several options for
connecting an optional XM or SIRIUS Satellite Radio receiver to this receiver:
- Sirius Satellite Radio: To receive Sirius Satellite
Radio, you can connect the optional SC-C1 Sirius Connect Universal Vehicle
Tuner (607SCC1,
sold separately) directly to the headunit's Sirius direct connection (no
proprietary interface required). You can also connect the Sirius
dock-and-play adapter (607SCVDOC1)
along with a compatible portable Sirius radio (all sold separately).
- Auxiliary Input: A portable XM or Sirius Satellite
Radio receiver can also be connected to the headunit via the front-panel
auxiliary input.
Note: A subscription is also required to receive
satellite radio programming from Sirius or XM.
Disc Playback
Compatible Discs: The
Clarion CMD7 marine CD receiver supports playback of CD, CD-R, CD-RW, and
CD-Text discs.
MP3/WMA Playback: : The unit can play MP3 (8-320 kbps) and
WMA (8-320 kbps) audio files recorded onto CD-R/RW discs using ISO9660 Level
1/2, Joliet, Romeo, or Apple ISO formats. The player can recognize up to 8
hierarchical levels per folder, up to 999 filers per folder, and a total of
3,000
files. This unit is compatible with, and will display MP3 and WMA ID3 tags.
Top Function: The Top Function resets the CD player to the
first track of a CD-audio disc. In the case of an MP3/WMA disc, the first
track of a folder being played will be reset.
Scan Play: This function allows you to locate and play the
first 10 seconds of all the tracks recorded on a CD or the first 10 seconds of
the first track of all the folders on an MP3/WMA disc.
Auto
Reload: When a CD is ejected and left sticking out of the CD slot for
15 seconds, the unit automatically reloads the CD to protect if from damage.
Backup Eject: The Backup Eject
feature allows you to eject a disc even if the power to the unit is turned off.
Aux/USB/iPod Connectivity
USB Port: The Clarion CMD7 is equipped with a rear-panel USB
type-A port attached to the chassis by a 39" pigtail that is USB1.1 and USB 2.0
compatible. The CMD7 supports playback of MP3 (8-320 kbps) and WMA (8-320 kbps) audio files recorded in FAT12/16/32 onto a USB mass storage/MTP device.
By supporting MTP, this unit will playback WMDRM10 protected files. The player can recognize up to 8 hierarchical levels per folder, up to
255 filers per folder, and a total of 510 files. This unit is compatible with,
and will display MP3 and WMA ID3 tags. The CMD7 offers USB playback functions such a Play/Pause,
Fast Forward/Reverse, Skip (Track/Folder), Repeat (Track/Folder), and Random
(Folder/All) as well as a screen list of your connected USB mass storage
device's tracks and folders.
Note: The optional Clarion 62" USB extension cable (020CAUSB,
sold separately) features a male USB type-A connector on one end which plugs
into the headunit's rear-panel USB port and a female USB type-A port on the
other end with a rubber cap that can be flush-mounted for a permanent and
safe installation in a marine environment.
iPod/iPhone Direct: The Clarion CMD7 allows you to connect
your iPod/iPhone to the headunit's front-panel USB port using your iPod's
USB/Dock cable for audio playback, control, and charging of your iPod/iPhone.
This headunit also supports the display of title information transmitted from
your iPod/iPhone.
- USB Connection: The USB connection allows your
iPod/iPhone's stored music to be loaded instantly to the headunit and sound
quality to be maximized through the headunit's 1-bit D/A converter, allowing
for a Signal to Noise ratio up to 80dB.
- Audio Playback: The Clarion headunit supports audio
playback of music files stored on your iPod or iPhone. iPod Video can be
viewed by connecting the CMD7 to an external universal monitor with RCA
video input and connecting a compatible iPod/iPhone via the optional Clarion
CCA748 cable (020CCA748,
sold separately).
- Music Navigation: The headunit lets you search music
for playback from your iPod/iPhone by category (Playlist, Artist, Album,
Song, Genre, or Composer). You can then search each category alphabetically.
You can also control the following playback functions of your iPod/iPhone:
Skip Tracks, Fast-forward/backward, Pause, Repeat, and Random. You can also
choose to control your iPod/iPhone from its clickwheel or touchscreen.
- Information Display: The headunit will display your
iPod/iPhone's music file information, including - Track number, Elapsed
playing time, Song Title, Artist Name, and Album Label.
- Charging: While connected and the ignition switch is
set to ACC or ON, the headunit's USB connection will power and charge your
iPod/iPhone.
Note: If your iPod/iPhone has no initial battery
charge, then the unit will not recognize it.
iPod/iPhone Compatibility Chart: The Clarion CMD7 is "Made
for iPod/iPhone" compatible and supports the following iPod/iPhone model
features (as of May 2011):
|
iPod/iPhone Model |
Generation |
Tested Version |
Media Type |
Control Type |
Display Type |
Charge |
|
Audio |
Video |
Headunit |
iPod/iPhone |
Song/Artist Text |
Track Info |
|
dock connector |
3rd |
N/A |
N |
N |
N |
N |
N |
N |
N |
clickwheel
color |
4th |
N/A |
N |
N |
N |
N |
N |
N |
N |
|
mini |
1st |
N/A |
N |
N |
N |
N |
N |
N |
N |
| 2nd |
N/A |
N |
N |
N |
N |
N |
N |
N |
|
video |
5th |
1.3 |
Y |
N |
Y |
N |
Y |
Y |
Y |
|
classic |
80GB |
1.1.2 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
|
120GB |
2.0.1 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
|
160GB |
2.0.4 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
|
nano |
1st |
1.3.1 |
Y |
N |
Y |
N |
Y |
Y |
Y |
|
2nd |
1.1.3 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
|
3rd |
1.1.3 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
|
4th |
1.0.4 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
|
5th |
1.0.2 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
|
6th |
1.0 PC |
Y |
N |
Y |
Y |
Y |
Y |
Y |
|
touch |
1st |
2.2.1 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
|
2nd |
4.2.1 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
|
3rd |
4.2.1 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
|
4th |
4.2.1 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
|
iPhone |
2G |
3.1.2 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
|
3G |
3.1.2 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
|
3GS |
3.1.2 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
|
4 |
4.2.1 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
Note: Apple iPod/iPhone software updates may change
functionality results. If you download a newer software version, you may
need to reset the headunit and your iPod/iPhone to regain functionality. If
this doesn't work, you may need to revert to the older software version or
wait until a newer software update is available.
Auxiliary Input: This unit
features a rear mounted, stereo RCA auxiliary input on a 6" pigtail so
you can connect an external audio source. The
sensitivity of the inputs can be set (low, mid, or high) to match the output of
the auxiliary source to the other sources.
Note: The optional Clarion auxiliary extension cable (020CCAUX,
sold separately) turns one pair of the headunit's stereo RCA inputs into a
single stereo minijack (3.5mm) input. The auxiliary extension cable's 3.5mm
connector features a rubber-cap and can be flush mounted for a permanent and
safe installation in a marine environment.
Remote Control
Optional Wireless Remote: The CMD7 is compatible with
Clarion's
RCB-176 IR remote control (020RCB176,
sold separately) for wireless operation of the marine receiver.
Optional Wired Remote: The unit is also equipped with a rear
mounted DIN connector to accommodate an optional Clarion wired marine remote
control. The Clarion MW1 (020MW1,
sold separately) is a hardwired remote control with an LCD display;
and the Clarion MW2 is a hard-wired remote control without an LCD display (020MW2,
sold separately).
Installation
Mounting: The CMD7 requires a
rectangular cutout in the bulkhead for inserting the chassis. Six screws
(supplied) fasten the faceplate against the mounting surface, and hold the
waterproof gasket against the bulkhead. A clear, self-adhesive template is
supplied to assist you with the cutout and drilling the screw holes. You can
install the unit within 30-degrees of horizontal.
Note:
The receiver does not include a mounting sleeve or ISO-mount screw holes to
accommodate standard I-, J-, or E-sized automotive installation.
Dimensions: The receiver has
the following dimensions:
- Chassis Width: 7.125"
- Chassis Height: 2.025"
- Chassis Depth: 7.0625"
- Nose Width: 7.765"
- Nose Height: 3.515"
- Nose Depth: 1.9375"
Screw Hole Pattern: The
faceplate has four mounting holes across the top, above the chassis, and two holes
below the chassis for securing the unit to the bulkhead. The screw hole spacing
is as follows:
- Top Row:
- Total Width:
7.0625"
- Width Between Two Center
Holes: 2.375"
- Width Between End Holes
and Adjacent Center Holes:
2.375"
- Bottom Row Width: 7.25"
- Height (Between Top and Bottom
Rows): 2.9375"
- Screw Mounting Depth:
0.875"
